Bachelor’s Degree Programme in Electrical and Automation Engineering (in Finnish)
Bachelor of Engineering, Electrical and Automation Engineering (in Finnish) 24S, full-time studies, Lahti
Timing plans by study path
Bachelor of Engineering, Electrical and Automation Engineering (in Finnish) 24S, full-time studies, Lappeenranta
Timing plans by study path
Bachelor of Engineering, Electrical and Automation Engineering (in Finnish) 23S, full-time studies, Lahti
Timing plans by study path
Enrollment
20.11.2024 - 10.01.2025
Timing
07.01.2025 - 28.02.2025
Number of ECTS credits allocated
3 op
Virtual portion
3 op
Mode of delivery
Distance learning
Unit
Faculty of Technology (LAB)
Campus
E-campus
Teaching languages
- Finnish
Seats
0 - 100
Degree programmes
- Bachelor’s Degree Programme in Electrical and Automation Engineering (in Finnish)
Teachers
- Tiina Valkonen
Scheduling groups
- Verkkoluento (Size: 0. Open UAS: 0.)
- Tentti (Size: 0. Open UAS: 0.)
Groups
-
TLTISAT25KM
Small groups
- Online lecture
- Exam
Learning outcomes
Student is able to
- simplify and handle mathematical expressions
- solve basic equations and system of two linear equations
- basics of percentage calculation
Assessment scale
1-5
Failed (0)
A student cannot solve basic mathematics well enough. Less than 40% of maximum scores.
Assessment criteria: level 1 (assessment scale 1–5)
To some extent, the student is able to cope with basic calculations..
Assessment criteria: level 3 (assessment scale 1–5)
The student has good basic skills in mathematics.
Assessment criteria: level 5 (assessment scale 1–5)
The student masters the basic skills of mathematics and is also able to apply them in engineering tasks.
Enrollment
06.05.2024 - 30.08.2024
Timing
01.08.2024 - 31.07.2025
Number of ECTS credits allocated
1 op
Mode of delivery
Contact teaching
Unit
Faculty of Technology (LAB)
Campus
Lahti Campus
Teaching languages
- Finnish
Degree programmes
- Bachelor’s Degree Programme in Electrical and Automation Engineering (in Finnish)
Teachers
- Teemu Heino
Scheduling groups
- Luennot (Size: 0. Open UAS: 0.)
Groups
-
TLTISAT24S
Small groups
- Lecture
Learning outcomes
The student is able to
- plan their own learning and cooperate in situations related to their own field of studies
- recognize their own competence and the needs to develop them further and to plan their careerpath observing them
- act as a group member
- operate in the learning environments of LAB University of Applied Sciences
- picture their own field of studies and its future skills- give feedback on tuition and services and thus participate in the development of education
Assessment scale
1-5
Enrollment
06.05.2024 - 30.08.2024
Timing
01.08.2024 - 31.07.2025
Number of ECTS credits allocated
1 op
Mode of delivery
Contact teaching
Unit
Faculty of Technology (LAB)
Campus
Lappeenranta Campus
Teaching languages
- Finnish
Degree programmes
- Bachelor’s Degree Programme in Electrical and Automation Engineering (in Finnish)
Teachers
- Tapani Heikkilä
Scheduling groups
- Luennot 1 (Size: 0. Open UAS: 0.)
Groups
-
TLPRSAT24S
Small groups
- Lecture 1
Learning outcomes
The student is able to
- plan their own learning and cooperate in situations related to their own field of studies
- recognize their own competence and the needs to develop them further and to plan their careerpath observing them
- act as a group member
- operate in the learning environments of LAB University of Applied Sciences
- picture their own field of studies and its future skills- give feedback on tuition and services and thus participate in the development of education
Implementation and methods of teaching
The student is able to:
· operate in LAB University of Applied Sciences' electronic systems
. identify his / her own competence, own strengths and development needs
· develop his or her own personal study and career plan
· provide feedback on services and participate in the development of education
Assessment scale
1-5
Enrollment
20.11.2024 - 10.01.2025
Timing
01.01.2025 - 31.12.2025
Number of ECTS credits allocated
1 op
Mode of delivery
Contact teaching
Unit
Faculty of Technology (LAB)
Campus
E-campus
Teaching languages
- Finnish
Degree programmes
- Bachelor’s Degree Programme in Electrical and Automation Engineering (in Finnish)
Teachers
- Teemu Heino
Scheduling groups
- Luennot 1 (Size: 50. Open UAS: 0.)
Groups
-
TLTISAT25KM
Small groups
- Lecture 1
Learning outcomes
The student is able to
- plan their own learning and cooperate in situations related to their own field of studies
- recognize their own competence and the needs to develop them further and to plan their careerpath observing them
- act as a group member
- operate in the learning environments of LAB University of Applied Sciences
- picture their own field of studies and its future skills- give feedback on tuition and services and thus participate in the development of education
Assessment scale
1-5
Enrollment
06.05.2024 - 30.08.2024
Timing
01.08.2024 - 31.07.2025
Number of ECTS credits allocated
1 op
Mode of delivery
Contact teaching
Unit
Faculty of Technology (LAB)
Campus
Lahti Campus
Teaching languages
- Finnish
Degree programmes
- Bachelor’s Degree Programme in Electrical and Automation Engineering (in Finnish)
Teachers
- Teemu Heino
Scheduling groups
- Toteutuksen opetusryhmä 1 (Size: 0. Open UAS: 0.)
Groups
-
TLTISAT23S
Small groups
- Scheduling group 1
Learning outcomes
The student is able to
- utilize various learning opportunities in curriculum
- recognize and aim their own competences to be in level with the future career requirements
- create a study plan that supports the future career goal
- give feedback on tuition and services and thus participate in the development of education
Assessment scale
1-5
Enrollment
20.11.2024 - 03.01.2025
Timing
01.01.2025 - 31.12.2025
Number of ECTS credits allocated
1 op
Mode of delivery
Contact teaching
Unit
Faculty of Technology (LAB)
Campus
E-campus
Teaching languages
- Finnish
Degree programmes
- Bachelor’s Degree Programme in Electrical and Automation Engineering (in Finnish)
Teachers
- Teemu Heino
Scheduling groups
- Verkkoluento 1 (Size: 50. Open UAS: 0.)
Groups
-
TLTISAT24KM
Small groups
- Online lecture 1
Learning outcomes
The student is able to
- utilize various learning opportunities in curriculum
- recognize and aim their own competences to be in level with the future career requirements
- create a study plan that supports the future career goal
- give feedback on tuition and services and thus participate in the development of education
Assessment scale
1-5
Enrollment
20.11.2024 - 03.01.2025
Timing
01.01.2025 - 31.12.2025
Number of ECTS credits allocated
1 op
Mode of delivery
Contact teaching
Unit
Faculty of Technology (LAB)
Campus
Lahti Campus
Teaching languages
- Finnish
Degree programmes
- Bachelor’s Degree Programme in Electrical and Automation Engineering (in Finnish)
Teachers
- Tapani Heikkilä
Scheduling groups
- Info 1 (Size: 0. Open UAS: 0.)
Groups
-
TLPRSAT23KM
Small groups
- Info 1
Learning outcomes
The student is able to
- identify themselves as a learner and develop their own learning skills
- evaluate innovative or alternative future competences required in their own field
- recognize and aim their own competences to be in level with the future career requirements
- masters the professional concepts of their own field and is able to point out their competenciesduring job recruitment processes
- give feedback on tuition and services and thus participate in the development of education
Assessment scale
1-5
Enrollment
12.08.2024 - 30.07.2025
Timing
01.08.2024 - 31.07.2025
Number of ECTS credits allocated
10 op
Mode of delivery
Contact teaching
Unit
Faculty of Technology (LAB)
Campus
- Lappeenranta Campus
- Lahti Campus
Teaching languages
- Finnish
Degree programmes
- Bachelor’s Degree Programme in Electrical and Automation Engineering (in Finnish)
Teachers
- Mika Neuvonen
- Timo Lahtinen
- Markku Levanen
- Janne Partinen
- Petteri Valtonen
- Teemu Heino
Groups
-
TLTISAT23S
-
TLPRSAT23KM
Learning outcomes
The student is able to
- describe work-related phenomena and use related concepts
- act in a productive way, following the practices of the workplace and the ethical principles of the profession
- use the techniques, work methods, models and processes that they have learnt
- act in a customer-oriented way in interactive situations in the workplace and in the cooperation network
- evaluate and develop their own competence int the work done in practical training
Assessment scale
1-5
Enrollment
20.11.2024 - 30.12.2025
Timing
01.01.2025 - 31.12.2025
Number of ECTS credits allocated
10 op
Mode of delivery
Contact teaching
Unit
Faculty of Technology (LAB)
Campus
Lahti Campus
Teaching languages
- Finnish
Degree programmes
- Bachelor’s Degree Programme in Electrical and Automation Engineering (in Finnish)
Teachers
- Timo Lahtinen
- Markku Levanen
- LAB_virtuaaliopettaja_SAT Virtuaaliopettaja (LAB)
- Janne Partinen
- Petteri Valtonen
- Teemu Heino
Groups
-
TLTISAT25KM
Learning outcomes
The student is able to
- describe work-related phenomena and use related concepts
- act in a productive way, following the practices of the workplace and the ethical principles of the profession
- use the techniques, work methods, models and processes that they have learnt
- act in a customer-oriented way in interactive situations in the workplace and in the cooperation network
- evaluate and develop their own competence int the work done in practical training
Assessment scale
1-5
Enrollment
20.11.2024 - 03.01.2025
Timing
01.01.2025 - 31.07.2025
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Unit
Faculty of Technology (LAB)
Campus
Lahti Campus
Teaching languages
- Finnish
Degree programmes
- Bachelor’s Degree Programme in Electrical and Automation Engineering (in Finnish)
Teachers
- Janne Partinen
Scheduling groups
- Luennot 1 (Size: 0. Open UAS: 0.)
Groups
-
TLTISAT23S
Small groups
- Lecture 1
Learning outcomes
Student is able to
- regognize the basics of user interface
- program alarms
- transfer user interface for PC control
- animate production lines
- create a control system for simple production line
Assessment scale
1-5
Timing
01.08.2024 - 30.09.2024
Number of ECTS credits allocated
1 op
Virtual portion
1 op
Mode of delivery
Distance learning
Unit
Faculty of Technology (LAB)
Campus
- E-campus, Lappeenranta
- E-campus, Lahti
Teaching languages
- Finnish
Degree programmes
- Bachelor's Degree Programme in Mechanical Engineering (in Finnish)
- Bachelor’s Degree Programme in Electrical and Automation Engineering (in Finnish)
- Bachelor's Degree Programme in Information Technology (in Finnish)
- Bachelor's Degree Programme in Sustainable Urban Planning (in Finnish)
- Bachelor's Degree Programme in Construction Engineering (in Finnish)
- Bachelor’s Degree Programme in Wood Technology (in Finnish)
Teachers
- Siru Kilpilampi
- Susanna Lesch
- Tarja Taurula
Teacher in charge
Susanna Lesch
Groups
-
TLTIKONE24S
-
TLTISAT24S
-
TLTISAT23S
-
TLTIAVOBIOTEK24SV
-
TLTITVT24SV
-
TLPRSAT24S
-
TLTIPUU24S
-
TLPRKONE24S
-
TLTIKKS24SM
-
TLPRRAK24S
Learning outcomes
Student is able to
- use diverce digital tools and learning environments
- evaluate own professional development
Implementation and methods of teaching
LAB@key (1 credit) is student’s digital introduction, which serves the purpose of getting you familiar with the procedures, digital tools and environments used in the University of Applied Sciences. LAB@key includes information about the digital tools and systems (user ID, e-mail, learning environments), course variety, as well as common knowledge about the progress of your studies and students’ wellbeing.
LAB@key (Bachelor´s Degree) includes seven parts:
1. Digital competence
2. Studying at the LAB UAS
3. Curriculum and planning your own studies
4. Course offerings
5. Ability to study - taking account of your own resources
6. Professional growth - identifying your own skills
7. Information Security training
And the final exam.
Exam retakes
The implementation is open from 1.8. to 30.9.2024. After that, the course can no longer be taken. The course is part of the orientation.
Learning environment
moodle.lut.fi
Student time use and work load
27 hours
Assessment scale
Approved/Failed
Assessment criteria: assessment scale failed/approved
The course is passed if the student gets all 50 questions of the final exam correct. Less than 50 points on the final exam means a failing grade. The student can take the final exam as many times as he/she likes.
Enrollment
06.05.2024 - 30.08.2024
Timing
04.09.2024 - 11.12.2024
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Unit
Faculty of Technology (LAB)
Campus
Lahti Campus
Teaching languages
- Finnish
Degree programmes
- Bachelor’s Degree Programme in Electrical and Automation Engineering (in Finnish)
Teachers
- Timo Lahtinen
- Markku Levanen
Scheduling groups
- Logiikkaohjelmoinnin perusteet TLTISAT23S 1 (Size: 0. Open UAS: 0.)
Groups
-
TLTISAT23S
Small groups
- Lecture 1
Learning outcomes
Student is able to
- regognize basic constructure of the logic program
- use TIA-portal
- use basic commands
- use data in programming
- carry out logic sequences using LD
Assessment scale
1-5
Enrollment
20.11.2024 - 03.01.2025
Timing
13.01.2025 - 25.04.2025
Number of ECTS credits allocated
5 op
Virtual portion
4 op
Mode of delivery
20 % Contact teaching, 80 % Distance learning
Unit
Faculty of Technology (LAB)
Campus
E-campus
Teaching languages
- Finnish
Degree programmes
- Bachelor’s Degree Programme in Electrical and Automation Engineering (in Finnish)
Teachers
- Timo Lahtinen
- Markku Levanen
Scheduling groups
- Luennot TLTISAT24KM (Size: 0. Open UAS: 0.)
Groups
-
TLTISAT24KM
Small groups
- Lecture TLTISAT24KM
Learning outcomes
Student is able to
- regognize basic constructure of the logic program
- use TIA-portal
- use basic commands
- use data in programming
- carry out logic sequences using LD
Assessment scale
1-5
Enrollment
20.11.2024 - 03.01.2025
Timing
13.01.2025 - 25.04.2025
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Unit
Faculty of Technology (LAB)
Campus
Lahti Campus
Teaching languages
- Finnish
Degree programmes
- Bachelor’s Degree Programme in Electrical and Automation Engineering (in Finnish)
Teachers
- Timo Lahtinen
- Markku Levanen
Scheduling groups
- Logiikkaohjelmoinnin sovellussuunnittelu 1 (Size: 0. Open UAS: 0.)
Groups
-
TLTISAT23S
Small groups
- Lecture 1
Learning outcomes
Student is able to
- descripe principal structures of sensors and inverter in programmable logics
- design linearic drive
- design product control system in programmable logics
- design material handling logic control with TIA-portal
Assessment scale
1-5
Enrollment
20.11.2024 - 03.01.2025
Timing
01.01.2025 - 31.07.2025
Number of ECTS credits allocated
3 op
Virtual portion
3 op
Mode of delivery
Distance learning
Unit
Faculty of Technology (LAB)
Campus
E-campus
Teaching languages
- Finnish
- English
Degree programmes
- Bachelor’s Degree Programme in Electrical and Automation Engineering (in Finnish)
- Bachelor's Degree Programme in Information Technology (in Finnish)
Teachers
- Karri Miettinen
Scheduling groups
- Luento 1 (Size: 500. Open UAS: 0.)
Groups
-
TLTITVT23SV
-
TLTISAT23S
Small groups
- Lecture 1
Learning outcomes
The student is able to
- design and use basic software testing methods
- use software maintenance systems
- design the software to be maintained
Assessment scale
1-5
Enrollment
20.11.2024 - 03.01.2025
Timing
07.01.2025 - 27.04.2025
Number of ECTS credits allocated
5 op
Virtual portion
5 op
Mode of delivery
Distance learning
Unit
Faculty of Technology (LAB)
Campus
E-campus
Teaching languages
- Finnish
Degree programmes
- Bachelor’s Degree Programme in Electrical and Automation Engineering (in Finnish)
- Bachelor's Degree Programme in Information Technology (in Finnish)
Teachers
- Matti Welin
- Minna Asplund
Scheduling groups
- Verkkoluento 1 (Size: 100. Open UAS: 0.)
- Avoimen ammattikorkeakoulun kiintiö (Size: 5. Open UAS: 5.)
Groups
-
TLTITVT23SV
-
TLTISAT23S
Small groups
- Online lecture 1
- Open UAS quota
Learning outcomes
The student is able to
- explain different methods of software engineering
- use agile methods in software projects
- act as a software developer in multidisciplinary projects
- describe different software architectures and use them in development
Assessment scale
1-5
Enrollment
06.05.2024 - 30.08.2024
Timing
02.09.2024 - 13.12.2024
Number of ECTS credits allocated
3 op
Mode of delivery
Contact teaching
Unit
Faculty of Technology (LAB)
Campus
E-campus
Teaching languages
- Finnish
Degree programmes
- Bachelor’s Degree Programme in Electrical and Automation Engineering (in Finnish)
Teachers
- Karri Miettinen
Scheduling groups
- Luennot 1 (Size: 500. Open UAS: 0.)
Groups
-
TLTISAT24S
-
TLTISAT24KM
-
TLPRSAT24S
Small groups
- Lecture 1
Learning outcomes
The student is able to:
- perform tasks on a computer through programming
- utilize and process data programmatically
- understand common programming structures
- understand the syntax of a programming language.
- implement small programs in the Python programming language
Assessment scale
1-5
Enrollment
06.05.2024 - 30.08.2024
Timing
05.09.2024 - 12.12.2024
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Unit
Faculty of Technology (LAB)
Campus
Lahti Campus
Teaching languages
- Finnish
Degree programmes
- Bachelor’s Degree Programme in Electrical and Automation Engineering (in Finnish)
Teachers
- Timo Lahtinen
- Markku Levanen
Scheduling groups
- Operointipanelit 1 (Size: 0. Open UAS: 0.)
Groups
-
TLTISAT23S
Small groups
- Lecture 1
Learning outcomes
Student is able to
- connect operation panel with programmable logic in TIA-portal
- design basic interface
- design optimal operation panel software
- use operation panel in production line control
- design compact data collection system in programmable logic
Assessment scale
1-5
Enrollment
20.11.2024 - 03.01.2025
Timing
13.01.2025 - 25.04.2025
Number of ECTS credits allocated
5 op
Virtual portion
4 op
Mode of delivery
20 % Contact teaching, 80 % Distance learning
Unit
Faculty of Technology (LAB)
Campus
E-campus
Teaching languages
- Finnish
Degree programmes
- Bachelor’s Degree Programme in Electrical and Automation Engineering (in Finnish)
Teachers
- Timo Lahtinen
- Markku Levanen
Scheduling groups
- Operointipanelit 24KM 1 (Size: 0. Open UAS: 0.)
Groups
-
TLTISAT24KM
Small groups
- Lecture 1
Learning outcomes
Student is able to
- connect operation panel with programmable logic in TIA-portal
- design basic interface
- design optimal operation panel software
- use operation panel in production line control
- design compact data collection system in programmable logic
Assessment scale
1-5
Enrollment
20.09.2024 - 30.07.2025
Timing
01.08.2024 - 31.07.2025
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Unit
Faculty of Technology (LAB)
Campus
Lappeenranta Campus
Teaching languages
- Finnish
Degree programmes
- Bachelor’s Degree Programme in Electrical and Automation Engineering (in Finnish)
Teachers
- Mika Neuvonen
- Riikka Hautamäki
- Jouni Könönen
- Teemu Heino
Groups
-
TLPRSAT23KM
Learning outcomes
The student is able to:
- present the results or output of their thesis
- report on their thesis in writing in accordance with the thesis guidelines of LAB University of Applied Sciences
- write a maturity test.
Assessment scale
1-5
Enrollment
20.09.2024 - 30.07.2025
Timing
01.08.2024 - 31.07.2025
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Unit
Faculty of Technology (LAB)
Campus
Lappeenranta Campus
Teaching languages
- Finnish
Degree programmes
- Bachelor’s Degree Programme in Electrical and Automation Engineering (in Finnish)
Teachers
- Mika Neuvonen
- Riikka Hautamäki
- Jouni Könönen
- Teemu Heino
Groups
-
TLPRSAT23KM
Learning outcomes
The student is able to:
- implement the thesis on the basis of an approved thesis plan.
Assessment scale
1-5
Enrollment
20.11.2024 - 03.01.2025
Timing
01.01.2025 - 31.07.2025
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Unit
Faculty of Technology (LAB)
Campus
Lahti Campus
Teaching languages
- Finnish
Degree programmes
- Bachelor’s Degree Programme in Electrical and Automation Engineering (in Finnish)
Teachers
- Janne Partinen
Scheduling groups
- Luennot 1 (Size: 0. Open UAS: 0.)
Groups
-
TLTISAT23S
Small groups
- Lecture 1
Learning outcomes
Student is able to
- descripe differences between PC and PLC controls
- use PC-control fieldbus
- use PC-control software
- program PC-controls
Assessment scale
1-5
Enrollment
06.05.2024 - 30.08.2024
Timing
01.08.2024 - 06.12.2024
Number of ECTS credits allocated
5 op
Virtual portion
4 op
Mode of delivery
20 % Contact teaching, 80 % Distance learning
Unit
Faculty of Technology (LAB)
Campus
E-campus, Lahti
Teaching languages
- Finnish
Seats
0 - 28
Degree programmes
- Bachelor’s Degree Programme in Electrical and Automation Engineering (in Finnish)
Teachers
- Kristian Rintala
Scheduling groups
- Itsenäinen 1 (Size: 0. Open UAS: 0.)
- Harjoitukset 1 (Size: 0. Open UAS: 0.)
Groups
-
TLTISAT24KM
Small groups
- 1
- Practice 1
Learning outcomes
Student is able to
- use basic components in pneumatics and hydraulics
- design pneumatic application
- design hydraulic application
Assessment scale
1-5
Enrollment
20.11.2024 - 03.01.2025
Timing
01.01.2025 - 30.04.2025
Number of ECTS credits allocated
5 op
Virtual portion
3 op
Mode of delivery
40 % Contact teaching, 60 % Distance learning
Unit
Faculty of Technology (LAB)
Campus
Lahti Campus
Teaching languages
- Finnish
Degree programmes
- Bachelor’s Degree Programme in Electrical and Automation Engineering (in Finnish)
Teachers
- Kristian Rintala
Scheduling groups
- Luennot 1 (Size: 1. Open UAS: 0.)
Groups
-
TLTISAT24S
Small groups
- Lecture 1
Learning outcomes
Student is able to
- use basic components in pneumatics and hydraulics
- design pneumatic application
- design hydraulic application
Assessment scale
1-5
Enrollment
20.11.2024 - 03.01.2025
Timing
01.01.2025 - 31.07.2025
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Unit
Faculty of Technology (LAB)
Campus
Lappeenranta Campus
Teaching languages
- Finnish
Degree programmes
- Bachelor’s Degree Programme in Electrical and Automation Engineering (in Finnish)
Teachers
- Simo Sinkko
Scheduling groups
- Luennot 1 (Size: 0. Open UAS: 0.)
Groups
-
TLPRSAT24S
Small groups
- Lecture 1
Learning outcomes
Student is able to
- use basic components in pneumatics and hydraulics
- design pneumatic application
- design hydraulic application
Assessment scale
1-5
Enrollment
20.11.2024 - 03.01.2025
Timing
01.01.2025 - 31.07.2025
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Unit
Faculty of Technology (LAB)
Campus
E-campus
Teaching languages
- Finnish
Degree programmes
- Bachelor’s Degree Programme in Electrical and Automation Engineering (in Finnish)
Teachers
- Ismo Nieminen
Scheduling groups
- Luennot 1 (Size: 0. Open UAS: 0.)
Groups
-
TLPRSAT23KM
Small groups
- Lecture 1
Assessment scale
1-5
Enrollment
20.11.2024 - 03.01.2025
Timing
01.01.2025 - 31.07.2025
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Unit
Faculty of Technology (LAB)
Campus
E-campus
Teaching languages
- Finnish
Degree programmes
- Bachelor’s Degree Programme in Electrical and Automation Engineering (in Finnish)
Teachers
- LAB_virtuaaliopettaja_SAT Virtuaaliopettaja (LAB)
- Jouni Könönen
Scheduling groups
- Verkkoluento 1 (Size: 0. Open UAS: 0.)
- Seminaari 1 (Size: 0. Open UAS: 0.)
Groups
-
TLPRSAT23KM
Small groups
- Online lecture 1
- Seminar 1
Assessment scale
1-5
Enrollment
15.11.2024 - 30.07.2025
Timing
01.08.2024 - 31.07.2025
Number of ECTS credits allocated
3 op
Virtual portion
3 op
Mode of delivery
Distance learning
Unit
Faculty of Technology (LAB)
Campus
E-campus
Teaching languages
- Finnish
Seats
0 - 5000
Degree programmes
- Bachelor's Degree Programme in Mechanical Engineering (in Finnish)
- Bachelor’s Degree Programme in Electrical and Automation Engineering (in Finnish)
- Complementary competence, Bachelor's (in Finnish)
Teachers
- Saku Syngelmä
Groups
-
TLABTO24H
-
TLTISAT24S
-
TLTISAT24KM
-
TLABAVO24K
-
TLTIKONE23KV
-
TLPRKONE22S
-
TLTIKONE22S
Learning outcomes
Student is able to
- regognize different types of robots
- program robots in basic level
- build up simple robotic cell
Assessment scale
Approved/Failed
Enrollment
06.05.2024 - 30.08.2024
Timing
01.08.2024 - 31.12.2024
Number of ECTS credits allocated
5 op
Virtual portion
4 op
Mode of delivery
20 % Contact teaching, 80 % Distance learning
Unit
Faculty of Technology (LAB)
Campus
E-campus, Lahti
Teaching languages
- Finnish
Seats
0 - 40
Degree programmes
- Bachelor’s Degree Programme in Electrical and Automation Engineering (in Finnish)
Teachers
- Juha Pere
- Teemu Heino
Scheduling groups
- Luennot 1 (Size: 0. Open UAS: 0.)
Groups
-
TLTISAT24KM
Small groups
- Lecture 1
Learning outcomes
Student is able to
- solve simple AC and DC circuits
- utilise phasors
- describe the properties and some of the uses of most common semiconductor components
- use simulation software
Learning environment
Moodle
Assessment scale
1-5
Enrollment
20.11.2024 - 03.01.2025
Timing
07.01.2025 - 30.04.2025
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Unit
Faculty of Technology (LAB)
Campus
Lahti Campus
Teaching languages
- Finnish
Seats
0 - 50
Degree programmes
- Bachelor’s Degree Programme in Electrical and Automation Engineering (in Finnish)
Teachers
- Tommi Veijalainen
Scheduling groups
- Luennot 1 (Size: 500. Open UAS: 0.)
Groups
-
TLTISAT24S
Small groups
- Lecture 1
Learning outcomes
Student is able to
- solve simple AC and DC circuits
- utilise phasors
- describe the properties and some of the uses of most common semiconductor components
- use simulation software
Learning environment
Moodle
Assessment scale
1-5
Enrollment
20.11.2024 - 03.01.2025
Timing
07.01.2025 - 30.04.2025
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Unit
Faculty of Technology (LAB)
Campus
Lappeenranta Campus
Teaching languages
- Finnish
Degree programmes
- Bachelor’s Degree Programme in Electrical and Automation Engineering (in Finnish)
Teachers
- Tommi Veijalainen
Scheduling groups
- Luennot 1 (Size: 500. Open UAS: 0.)
Groups
-
TLPRSAT24S
Small groups
- Lecture 1
Learning outcomes
Student is able to
- solve simple AC and DC circuits
- utilise phasors
- describe the properties and some of the uses of most common semiconductor components
- use simulation software
Learning environment
Moodle
Assessment scale
1-5
Enrollment
06.05.2024 - 30.08.2024
Timing
01.08.2024 - 31.12.2024
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Unit
Faculty of Technology (LAB)
Campus
Lahti Campus
Teaching languages
- Finnish
Degree programmes
- Bachelor’s Degree Programme in Electrical and Automation Engineering (in Finnish)
Teachers
- Petteri Valtonen
Scheduling groups
- Toteutuksen opetusryhmä 1 (Size: 0. Open UAS: 0.)
Groups
-
TLTISAT23S
Small groups
- Scheduling group 1
Learning outcomes
The student is able to
- describe the working principle, properties, and typical applications of the most common electric machine types
- form a single-phase equivalent circuit of an electric machine
- state the most important selection and dimensioning principles of electric machines in industrial applications
Assessment scale
1-5
Enrollment
20.11.2024 - 03.01.2025
Timing
01.01.2025 - 31.07.2025
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Unit
Faculty of Technology (LAB)
Campus
E-campus
Teaching languages
- Finnish
Degree programmes
- Bachelor’s Degree Programme in Electrical and Automation Engineering (in Finnish)
Teachers
- LAB_virtuaaliopettaja_SAT Virtuaaliopettaja (LAB)
Scheduling groups
- Luennot 1 (Size: 0. Open UAS: 0.)
Groups
-
TLTISAT24KM
Small groups
- Lecture 1
Learning outcomes
The student is able to
- describe the working principle, properties, and typical applications of the most common electric machine types
- form a single-phase equivalent circuit of an electric machine
- state the most important selection and dimensioning principles of electric machines in industrial applications
Assessment scale
1-5
Enrollment
20.11.2024 - 03.01.2025
Timing
01.01.2025 - 31.07.2025
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Unit
Faculty of Technology (LAB)
Campus
E-campus
Teaching languages
- Finnish
Degree programmes
- Bachelor’s Degree Programme in Electrical and Automation Engineering (in Finnish)
Teachers
- Mika Neuvonen
- LAB_virtuaaliopettaja_SAT Virtuaaliopettaja (LAB)
Scheduling groups
- Verkkoluento 1 (Size: 0. Open UAS: 0.)
- Seminaari 1 (Size: 0. Open UAS: 0.)
Groups
-
TLPRSAT23KM
Small groups
- Online lecture 1
- Seminar 1
Assessment scale
1-5
Enrollment
06.05.2024 - 30.08.2024
Timing
01.08.2024 - 31.12.2024
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Unit
Faculty of Technology (LAB)
Campus
E-campus, Lappeenranta
Teaching languages
- Finnish
Degree programmes
- Bachelor’s Degree Programme in Electrical and Automation Engineering (in Finnish)
Teachers
- Mika Neuvonen
- Janne Partinen
Scheduling groups
- Luennot (Size: 0. Open UAS: 0.)
Groups
-
TLPRSAT23KM
Small groups
- Lecture
Learning outcomes
The student is able to
- design and dimension the contactor controls of a direct-on-line electric drive
- design the safety circuit of an electric drive
- dimension the protective devices and cabling of an electric drive
- dimension and parameterise a frequency converter controlled electric motor drive
- describe the possibilities of connecting a frequency converter to the automation system
Assessment scale
1-5
Enrollment
20.11.2024 - 03.01.2025
Timing
01.01.2025 - 31.07.2025
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Unit
Faculty of Technology (LAB)
Campus
Lahti Campus
Teaching languages
- Finnish
Degree programmes
- Bachelor’s Degree Programme in Electrical and Automation Engineering (in Finnish)
Teachers
- Petteri Valtonen
Scheduling groups
- Toteutuksen opetusryhmä (Size: 0. Open UAS: 0.)
Groups
-
TLTISAT23S
Small groups
- Scheduling group
Learning outcomes
The student is able to
- design and dimension the contactor controls of a direct-on-line electric drive
- design the safety circuit of an electric drive
- dimension the protective devices and cabling of an electric drive
- dimension and parameterise a frequency converter controlled electric motor drive
- describe the possibilities of connecting a frequency converter to the automation system
Assessment scale
1-5
Enrollment
20.11.2024 - 12.01.2025
Timing
07.01.2025 - 30.04.2025
Number of ECTS credits allocated
4 op
Virtual portion
4 op
Mode of delivery
Distance learning
Unit
Faculty of Technology (LAB)
Campus
E-campus
Teaching languages
- Finnish
Seats
0 - 200
Degree programmes
- Bachelor’s Degree Programme in Electrical and Automation Engineering (in Finnish)
Teachers
- Juha Pere
Scheduling groups
- Luennot 1 (Size: 0. Open UAS: 0.)
Groups
-
TLTISAT25KM
Small groups
- Lecture 1
Learning outcomes
The student is able to
- describe electrical phenomena behind technological development
- mathematically solve problems related to electricity and the decibel scale
- perform calculations related to electric charge and magnetism
- apply digitalisation in the processing of results
Implementation and methods of teaching
Lectures, moodle
Learning material and recommended literature
The pages in Moodle
Learning environment
Moodle, Zoom
Contents
Electricity
Magnetism
Desibels
Assessment criteria
Exam, exercises
Assessment scale
1-5
Enrollment
06.05.2024 - 30.08.2024
Timing
01.08.2024 - 28.03.2025
Number of ECTS credits allocated
6 op
Mode of delivery
Contact teaching
Unit
Faculty of Technology (LAB)
Campus
E-campus, Lappeenranta
Teaching languages
- Finnish
Degree programmes
- Bachelor’s Degree Programme in Electrical and Automation Engineering (in Finnish)
Teachers
- Mika Neuvonen
- Jouni Könönen
- Janne Partinen
Scheduling groups
- Luennot 1 (Size: 0. Open UAS: 0.)
- Seminaari 1 (Size: 0. Open UAS: 0.)
Groups
-
TLPRSAT23KM
Small groups
- Lecture 1
- Seminar 1
Learning outcomes
Student:
- Be able to work in a project work environment and in a project.
- Can understand the different phases of a project and the principles of planning, management and control.
- Can report on the progress of a project at different stages.
- Can receive and give suggestions for improvement and feedback in project management tasks.
- Can evaluate the success of a project.
Assessment scale
1-5
Enrollment
06.05.2024 - 30.08.2024
Timing
02.09.2024 - 31.12.2024
Number of ECTS credits allocated
3 op
Virtual portion
3 op
Mode of delivery
Distance learning
Unit
Faculty of Technology (LAB)
Campus
E-campus, Lahti
Teaching languages
- Finnish
Seats
0 - 45
Degree programmes
- Bachelor’s Degree Programme in Electrical and Automation Engineering (in Finnish)
Teachers
- Juha Pere
Scheduling groups
- Luennot 1 (Size: 0. Open UAS: 0.)
Groups
-
TLTISAT24KM
Small groups
- Lecture 1
Learning outcomes
The student is able to
- Perform physical measurements and write a proper report of the results
- Process measurement results, make graphical representations thereof, and perform error evaluation
- Perform calculations related to electric charge and magnetism
- Describe the electromagnetic behaviour of electric devices
Implementation and methods of teaching
Lectures, Working in the "laboratory" and writing reports
Learning material and recommended literature
Moodle pages
Learning environment
Moodle, classroom. laboratory
Contents
Measuring and reporting on topics given by the teacher.
Electric charge and magnetism
Electromagnetic behavior with electric devices
Additional information for students: previous knowledge etc.
AT00CH50 Basic Studies in Physics or AT00BT70 Tekniikan fysiikan perusteet should be studied before, or some other course about basics in physics.
Assessment criteria
Exam, exercises, reports
Assessment scale
1-5
Enrollment
20.11.2024 - 06.01.2025
Timing
01.01.2025 - 30.04.2025
Number of ECTS credits allocated
3 op
Mode of delivery
Contact teaching
Unit
Faculty of Technology (LAB)
Campus
Lahti Campus
Teaching languages
- Finnish
Seats
0 - 50
Degree programmes
- Bachelor’s Degree Programme in Electrical and Automation Engineering (in Finnish)
Teachers
- Juha Pere
Scheduling groups
- Harjoitukset 1 (Size: 0. Open UAS: 0.)
Groups
-
TLTISAT24S
Small groups
- Practice 1
Learning outcomes
The student is able to
- Perform physical measurements and write a proper report of the results
- Process measurement results, make graphical representations thereof, and perform error evaluation
- Perform calculations related to electric charge and magnetism
- Describe the electromagnetic behaviour of electric devices
Implementation and methods of teaching
Lectures, Working in the "laboratory" and writing reports
Learning material and recommended literature
Moodle pages
Learning environment
Moodle, classroom. laboratory
Contents
Measuring and reporting on topics given by the teacher.
Electric charge and magnetism
Electromagnetic behavior with electric devices
Additional information for students: previous knowledge etc.
AT00CH50 Basic Studies in Physics or AT00BT70 Tekniikan fysiikan perusteet should be studied before, or some other course about basics in physics.
Assessment criteria
Exam, exercises, reports
Assessment scale
1-5
Enrollment
20.11.2024 - 03.01.2025
Timing
07.01.2025 - 25.04.2025
Number of ECTS credits allocated
3 op
Mode of delivery
Contact teaching
Unit
Faculty of Technology (LAB)
Campus
Lappeenranta Campus
Teaching languages
- Finnish
Seats
0 - 50
Degree programmes
- Bachelor’s Degree Programme in Electrical and Automation Engineering (in Finnish)
Teachers
- Arttu Siukola
Scheduling groups
- Luennot 1 (Size: 0. Open UAS: 0.)
- Avoimen ammattikorkeakoulun kiintiö (Size: 5. Open UAS: 5.)
Groups
-
TLPRSAT24S
Small groups
- Lecture 1
- Open UAS quota
Learning outcomes
The student is able to
- Perform physical measurements and write a proper report of the results
- Process measurement results, make graphical representations thereof, and perform error evaluation
- Perform calculations related to electric charge and magnetism
- Describe the electromagnetic behaviour of electric devices
Implementation and methods of teaching
Lectures, Working in the "laboratory" and writing reports
Learning material and recommended literature
Moodle pages
Learning environment
Moodle, classroom. laboratory
Contents
Measuring and reporting on topics given by the teacher.
Electric charge and magnetism
Electromagnetic behavior with electric devices
Additional information for students: previous knowledge etc.
AT00CH50 Basic Studies in Physics or AT00BT70 Tekniikan fysiikan perusteet should be studied before, or some other course about basics in physics.
Assessment criteria
Exam, exercises, reports
Assessment scale
1-5
Enrollment
06.05.2024 - 30.08.2024
Timing
01.08.2024 - 31.07.2025
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Unit
Faculty of Technology (LAB)
Campus
Lahti Campus
Teaching languages
- Finnish
Degree programmes
- Bachelor’s Degree Programme in Electrical and Automation Engineering (in Finnish)
Teachers
- Petteri Valtonen
Scheduling groups
- Harjoitukset (Size: 0. Open UAS: 0.)
Groups
-
TLTISAT24S
Small groups
- Practice
Learning outcomes
Student is able to
- use basic electrical measuring equipment
- plan and report laboratory work
Assessment scale
1-5
Enrollment
06.05.2024 - 30.08.2024
Timing
01.08.2024 - 31.07.2025
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Unit
Faculty of Technology (LAB)
Campus
Lappeenranta Campus
Teaching languages
- Finnish
Degree programmes
- Bachelor’s Degree Programme in Electrical and Automation Engineering (in Finnish)
Teachers
- Mika Neuvonen
- Jouni Könönen
- Petteri Valtonen
Scheduling groups
- Simulaatio 1 (Size: 0. Open UAS: 0.)
- Simulaatio 2 (Size: 0. Open UAS: 0.)
- Simulaatio 3 (Size: 0. Open UAS: 0.)
- Luennot 1 (Size: 0. Open UAS: 0.)
- Laboratorio 1 (Size: 0. Open UAS: 0.)
- Laboratorio 2 (Size: 0. Open UAS: 0.)
- Laboratorio 1 ja 2 (Size: 0. Open UAS: 0.)
Groups
-
TLPRSAT24S
Small groups
- Simulation 1
- Simulation 2
- Simulation 3
- Lecture 1
- Laboratory 1
- Laboratory 2
- Laboratory 1 and 2
Learning outcomes
Student is able to
- use basic electrical measuring equipment
- plan and report laboratory work
Assessment scale
1-5
Enrollment
20.11.2024 - 10.01.2025
Timing
01.01.2025 - 27.12.2025
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Unit
Faculty of Technology (LAB)
Campus
E-campus
Teaching languages
- Finnish
Degree programmes
- Bachelor’s Degree Programme in Electrical and Automation Engineering (in Finnish)
Teachers
- Petteri Valtonen
Scheduling groups
- Harjoitukset (Size: 0. Open UAS: 0.)
Groups
-
TLTISAT25KM
Small groups
- Practice
Learning outcomes
Student is able to
- use basic electrical measuring equipment
- plan and report laboratory work
Assessment scale
1-5
Enrollment
15.10.2024 - 03.01.2025
Timing
10.10.2024 - 31.07.2025
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Unit
Faculty of Technology (LAB)
Campus
Lahti Campus
Teaching languages
- Finnish
Degree programmes
- Bachelor’s Degree Programme in Electrical and Automation Engineering (in Finnish)
Teachers
- Petteri Valtonen
Scheduling groups
- Harjoitukset 1 (Size: 0. Open UAS: 0.)
Groups
-
TLTISAT23S
Small groups
- Practice 1
Learning outcomes
The student is able to
- work safely in the laboratory at low voltage (< 1000 VAC)
- plan and implement electric setups in the laboratory
- perform electrical measurements, analyze and report results thereof, and write a report
Assessment scale
1-5
Enrollment
06.05.2024 - 30.08.2024
Timing
14.10.2024 - 13.12.2024
Number of ECTS credits allocated
3 op
Mode of delivery
Contact teaching
Unit
Faculty of Technology (LAB)
Campus
Lahti Campus
Teaching languages
- Finnish
Degree programmes
- Bachelor’s Degree Programme in Electrical and Automation Engineering (in Finnish)
Teachers
- Heidi Rutila
- LAB_LUMA-assari LUMA-assari (LAB)
Scheduling groups
- Luennot 1 (Size: 0. Open UAS: 0.)
- Harjoitukset 1 (Size: 0. Open UAS: 0.)
- Harjoitukset opiskelija-assari 1 (Size: 0. Open UAS: 0.)
Groups
-
TLTISAT24S
Small groups
- Lecture 1
- Practice 1
- Practice 1
Learning outcomes
Student is able to
- calculate and simulate mathematical expressions
- solve pair and group of equations
- solve trigonometrical problems
Assessment scale
1-5
Enrollment
06.05.2024 - 30.08.2024
Timing
01.08.2024 - 31.12.2024
Number of ECTS credits allocated
3 op
Mode of delivery
Contact teaching
Unit
Faculty of Technology (LAB)
Campus
Lappeenranta Campus
Teaching languages
- Finnish
Degree programmes
- Bachelor’s Degree Programme in Electrical and Automation Engineering (in Finnish)
Teachers
- Arttu Siukola
Scheduling groups
- Luennot 1 (Size: 0. Open UAS: 0.)
Groups
-
TLPRSAT24S
Small groups
- Lecture 1
Learning outcomes
Student is able to
- calculate and simulate mathematical expressions
- solve pair and group of equations
- solve trigonometrical problems
Assessment scale
1-5
Enrollment
20.11.2024 - 17.02.2025
Timing
17.02.2025 - 16.05.2025
Number of ECTS credits allocated
3 op
Virtual portion
3 op
Mode of delivery
Distance learning
Unit
Faculty of Technology (LAB)
Campus
E-campus
Teaching languages
- Finnish
Degree programmes
- Bachelor’s Degree Programme in Electrical and Automation Engineering (in Finnish)
Teachers
- Tiina Valkonen
Scheduling groups
- Verkkoluento 1 (Size: 0. Open UAS: 0.)
- Tentti (Size: 0. Open UAS: 0.)
Groups
-
TLTISAT25KM
Small groups
- Online lecture 1
- Exam
Learning outcomes
Student is able to
- solve equations and simultaneous equations
- solve the angles and sides of different types of triangles and use similarity
- solve trigonometrical problems
Assessment scale
1-5
Enrollment
06.05.2024 - 30.08.2024
Timing
02.09.2024 - 13.12.2024
Number of ECTS credits allocated
3 op
Virtual portion
3 op
Mode of delivery
Distance learning
Unit
Faculty of Technology (LAB)
Campus
E-campus, Lahti
Teaching languages
- Finnish
Seats
0 - 50
Degree programmes
- Bachelor’s Degree Programme in Electrical and Automation Engineering (in Finnish)
Teachers
- Tiina Valkonen
Scheduling groups
- Verkkoluento (Size: 0. Open UAS: 0.)
Groups
-
TLTISAT24KM
Small groups
- Online lecture
Learning outcomes
Student is able to
- regognise different polynomial equations and polynomial graph
- solve inequalities
- solve basic derivation functions and utilise derivation in practice
- solve integrated polynomial functions and utilise integration in practice
- derive and integrate trigonometric functions
Assessment scale
1-5
Enrollment
20.11.2024 - 03.01.2025
Timing
01.01.2025 - 31.07.2025
Number of ECTS credits allocated
3 op
Mode of delivery
Contact teaching
Unit
Faculty of Technology (LAB)
Campus
Lahti Campus
Teaching languages
- Finnish
Degree programmes
- Bachelor’s Degree Programme in Electrical and Automation Engineering (in Finnish)
Teachers
- Heidi Rutila
Scheduling groups
- Luennot 1 (Size: 0. Open UAS: 0.)
Groups
-
TLTISAT24S
Small groups
- Lecture 1
Learning outcomes
Student is able to
- regognise different polynomial equations and polynomial graph
- solve inequalities
- solve basic derivation functions and utilise derivation in practice
- solve integrated polynomial functions and utilise integration in practice
- derive and integrate trigonometric functions
Assessment scale
1-5
Enrollment
20.11.2024 - 03.01.2025
Timing
07.01.2025 - 25.04.2025
Number of ECTS credits allocated
3 op
Virtual portion
1 op
Mode of delivery
67 % Contact teaching, 33 % Distance learning
Unit
Faculty of Technology (LAB)
Campus
Lappeenranta Campus
Teaching languages
- Finnish
Seats
10 - 50
Degree programmes
- Bachelor’s Degree Programme in Electrical and Automation Engineering (in Finnish)
Teachers
- Arttu Siukola
Scheduling groups
- Luennot 1 (Size: 0. Open UAS: 0.)
- Avoimen ammattikorkeakoulun kiintiö (Size: 5. Open UAS: 5.)
Groups
-
TLPRSAT24S
Small groups
- Lecture 1
- Open UAS quota
Learning outcomes
Student is able to
- regognise different polynomial equations and polynomial graph
- solve inequalities
- solve basic derivation functions and utilise derivation in practice
- solve integrated polynomial functions and utilise integration in practice
- derive and integrate trigonometric functions
Assessment scale
1-5
Enrollment
06.05.2024 - 30.08.2024
Timing
02.09.2024 - 08.12.2024
Number of ECTS credits allocated
3 op
Virtual portion
1 op
Mode of delivery
67 % Contact teaching, 33 % Distance learning
Unit
Faculty of Technology (LAB)
Campus
Lahti Campus
Teaching languages
- Finnish
Seats
5 - 50
Degree programmes
- Bachelor’s Degree Programme in Electrical and Automation Engineering (in Finnish)
Teachers
- Arttu Siukola
Scheduling groups
- Luennot 1 (Size: 0. Open UAS: 0.)
- Harjoitukset 1 (Size: 0. Open UAS: 0.)
Groups
-
TLTISAT23S
Small groups
- Lecture 1
- Practice 1
Learning outcomes
Student is able to
- basics of differential equations
- solve geometric problems
- solve and utilize basic plane and space vectors
- basic concepts of matrices and solving matrices with software
Assessment scale
1-5
Enrollment
20.11.2024 - 10.01.2025
Timing
07.01.2025 - 16.05.2025
Number of ECTS credits allocated
3 op
Virtual portion
3 op
Mode of delivery
Distance learning
Unit
Faculty of Technology (LAB)
Campus
E-campus
Teaching languages
- Finnish
Seats
0 - 50
Degree programmes
- Bachelor’s Degree Programme in Electrical and Automation Engineering (in Finnish)
Teachers
- Tiina Valkonen
Scheduling groups
- Verkkoluento (Size: 0. Open UAS: 0.)
- Tentti (Size: 0. Open UAS: 0.)
Groups
-
TLTISAT24KM
Small groups
- Online lecture
- Exam
Learning outcomes
Student is able to
- basics of differential equations
- solve geometric problems
- solve and utilize basic plane and space vectors
- basic concepts of matrices and solving matrices with software
Assessment scale
1-5
Enrollment
06.05.2024 - 30.08.2024
Timing
01.08.2024 - 31.12.2024
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Unit
Faculty of Technology (LAB)
Campus
Lahti Campus
Teaching languages
- Finnish
Degree programmes
- Bachelor’s Degree Programme in Electrical and Automation Engineering (in Finnish)
Teachers
- Teemu Heino
Scheduling groups
- Luennot 1 (Size: 0. Open UAS: 0.)
Groups
-
TLTISAT24S
Small groups
- Lecture 1
Learning outcomes
The student is able to
- recognize the fundamental electrical quantities and their interrelations
- solve simple DC and AC circuits
- explain the principle of a three-phase system and three-phase power
- describe the most common applications of electrical engineering
Assessment scale
1-5
Enrollment
06.05.2024 - 30.08.2024
Timing
01.08.2024 - 31.12.2024
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Unit
Faculty of Technology (LAB)
Campus
Lappeenranta Campus
Teaching languages
- Finnish
Degree programmes
- Bachelor’s Degree Programme in Electrical and Automation Engineering (in Finnish)
Teachers
- Juha Pere
- Mika Neuvonen
Scheduling groups
- Luennot 1 (Size: 0. Open UAS: 0.)
Groups
-
TLPRSAT24S
Small groups
- Lecture 1
Learning outcomes
The student is able to
- recognize the fundamental electrical quantities and their interrelations
- solve simple DC and AC circuits
- explain the principle of a three-phase system and three-phase power
- describe the most common applications of electrical engineering
Assessment scale
1-5
Enrollment
20.11.2024 - 10.01.2025
Timing
01.01.2025 - 31.07.2025
Number of ECTS credits allocated
3 op
Mode of delivery
Contact teaching
Unit
Faculty of Technology (LAB)
Campus
E-campus
Teaching languages
- Finnish
Degree programmes
- Bachelor’s Degree Programme in Electrical and Automation Engineering (in Finnish)
Teachers
- Teemu Heino
Scheduling groups
- Itsenäinen (Size: 60. Open UAS: 0.)
Groups
-
TLTISAT25KM
Small groups
- 1
Learning outcomes
The student is able to
- recognize the fundamental electrical quantities and their interrelations
- solve simple DC and AC circuits
- explain the principle of a three-phase system and three-phase power
- describe the most common applications of electrical engineering
Assessment scale
1-5
Enrollment
06.05.2024 - 30.08.2024
Timing
01.08.2024 - 31.12.2024
Number of ECTS credits allocated
6 op
Virtual portion
4 op
Mode of delivery
34 % Contact teaching, 66 % Distance learning
Unit
Faculty of Technology (LAB)
Campus
E-campus
Teaching languages
- Finnish
Degree programmes
- Bachelor’s Degree Programme in Electrical and Automation Engineering (in Finnish)
Teachers
- Petteri Valtonen
Scheduling groups
- Verkkoluento (Size: 0. Open UAS: 0.)
Groups
-
TLTISAT24KM
-
TLPRSAT23KM
Small groups
- Online lecture
Learning outcomes
The student is able to
- describe the structure of electrical transmission and distribution networks and their essential design principles
- describe the essential design principles related to high voltage systems and their protective equipment
- utilize the decrees and guidelines related to electric installations in buildings
Assessment scale
1-5
Enrollment
20.11.2024 - 03.01.2025
Timing
01.01.2025 - 31.07.2025
Number of ECTS credits allocated
6 op
Mode of delivery
Contact teaching
Unit
Faculty of Technology (LAB)
Campus
Lahti Campus
Teaching languages
- Finnish
Degree programmes
- Bachelor’s Degree Programme in Electrical and Automation Engineering (in Finnish)
Teachers
- Petteri Valtonen
Scheduling groups
- Toteutuksen opetusryhmä (Size: 0. Open UAS: 0.)
Groups
-
TLTISAT24S
Small groups
- Scheduling group
Learning outcomes
The student is able to
- describe the structure of electrical transmission and distribution networks and their essential design principles
- describe the essential design principles related to high voltage systems and their protective equipment
- utilize the decrees and guidelines related to electric installations in buildings
Assessment scale
1-5
Enrollment
20.11.2024 - 03.01.2025
Timing
01.01.2025 - 31.07.2025
Number of ECTS credits allocated
6 op
Mode of delivery
Contact teaching
Unit
Faculty of Technology (LAB)
Campus
Lappeenranta Campus
Teaching languages
- Finnish
Degree programmes
- Bachelor’s Degree Programme in Electrical and Automation Engineering (in Finnish)
Teachers
- LAB_virtuaaliopettaja_SAT Virtuaaliopettaja (LAB)
Scheduling groups
- Luennot 1 (Size: 0. Open UAS: 0.)
Groups
-
TLPRSAT24S
Small groups
- Lecture 1
Learning outcomes
The student is able to
- describe the structure of electrical transmission and distribution networks and their essential design principles
- describe the essential design principles related to high voltage systems and their protective equipment
- utilize the decrees and guidelines related to electric installations in buildings
Assessment scale
1-5
Enrollment
06.05.2024 - 30.08.2024
Timing
04.09.2024 - 31.12.2024
Number of ECTS credits allocated
2 op
Mode of delivery
Contact teaching
Unit
Faculty of Technology (LAB)
Campus
Lahti Campus
Teaching languages
- Finnish
Degree programmes
- Bachelor’s Degree Programme in Electrical and Automation Engineering (in Finnish)
Teachers
- Petteri Valtonen
Scheduling groups
- Harjoitukset 1 (Size: 0. Open UAS: 0.)
Groups
-
TLTISAT23S
Small groups
- Practice 1
Learning outcomes
The student is able to
- explain the required inspections for the commissioning of an electrical installation
- write an inspection report
Assessment scale
1-5
Timing
01.08.2024 - 31.12.2024
Number of ECTS credits allocated
2 op
Mode of delivery
Contact teaching
Unit
Faculty of Technology (LAB)
Campus
E-campus
Teaching languages
- Finnish
Degree programmes
- Bachelor’s Degree Programme in Electrical and Automation Engineering (in Finnish)
Teachers
- Petteri Valtonen
Scheduling groups
- Toteutuksen opetusryhmä (Size: 0. Open UAS: 0.)
Groups
-
TLTISAT24KM
Small groups
- Scheduling group
Learning outcomes
The student is able to
- explain the required inspections for the commissioning of an electrical installation
- write an inspection report
Assessment scale
1-5
Enrollment
06.05.2024 - 06.09.2024
Timing
01.08.2024 - 31.12.2024
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Unit
Faculty of Technology (LAB)
Campus
E-campus, Lappeenranta
Teaching languages
- Finnish
Degree programmes
- Bachelor’s Degree Programme in Electrical and Automation Engineering (in Finnish)
Teachers
- Mika Neuvonen
- Janne Partinen
Scheduling groups
- Verkkoluento (Size: 0. Open UAS: 0.)
Groups
-
TLPRSAT23KM
Small groups
- Online lecture
Learning outcomes
The student is able to
- Model simple continuous-time dynamic systems
- Design a PID controller and simulate its behaviour
Assessment scale
1-5
Enrollment
20.11.2024 - 03.01.2025
Timing
01.01.2025 - 31.07.2025
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Unit
Faculty of Technology (LAB)
Campus
Lahti Campus
Teaching languages
- Finnish
Degree programmes
- Bachelor’s Degree Programme in Electrical and Automation Engineering (in Finnish)
Teachers
- Janne Partinen
Scheduling groups
- Luennot 1 (Size: 0. Open UAS: 0.)
Groups
-
TLTISAT23S
Small groups
- Lecture 1
Learning outcomes
The student is able to
- Model simple continuous-time dynamic systems
- Design a PID controller and simulate its behaviour
Assessment scale
1-5
Enrollment
20.11.2024 - 03.01.2025
Timing
07.01.2025 - 30.04.2025
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Unit
Faculty of Technology (LAB)
Campus
E-campus
Teaching languages
- Finnish
Degree programmes
- Bachelor’s Degree Programme in Electrical and Automation Engineering (in Finnish)
Teachers
- Tommi Veijalainen
Scheduling groups
- Luennot 1 (Size: 500. Open UAS: 0.)
Groups
-
TLPRSAT23KM
Small groups
- Lecture 1
Learning outcomes
The student is able to
- Describe the properties of basic power electronic components and some of their uses
- Describe the most common DC/DC converter topologies and explain their principles of operation
- Describe the structure of a voltage source inverter, its principle of operation and most important applications
Assessment scale
1-5
Enrollment
06.05.2024 - 08.09.2024
Timing
02.09.2024 - 31.12.2024
Number of ECTS credits allocated
3 op
Mode of delivery
Contact teaching
Unit
Faculty of Technology (LAB)
Campus
Lahti Campus
Teaching languages
- Finnish
Seats
0 - 40
Degree programmes
- Bachelor’s Degree Programme in Electrical and Automation Engineering (in Finnish)
Teachers
- Arttu Siukola
Scheduling groups
- Luennot 1 (Size: 0. Open UAS: 0.)
Groups
-
TLTISAT24S
Small groups
- Lecture 1
Learning outcomes
Student is able to
- understand the purpose of the physics in technology
- describe and utilize the SI-unit system and implement
- solve mathematical problems in kinematics, mechanics and thermodynamics
- utilize vectors
Implementation and methods of teaching
Lectures, exercises, Moodle pages
Learning material and recommended literature
The pages in Moodle
Learning environment
Moodle, classroom
Contents
SI-units
Basics of mechanics
Heat and energy
Force and vectors
Efficiency
Assessment criteria
Exercises and exam
Assessment scale
1-5
Enrollment
06.05.2024 - 30.08.2024
Timing
02.09.2024 - 31.12.2024
Number of ECTS credits allocated
3 op
Mode of delivery
Contact teaching
Unit
Faculty of Technology (LAB)
Campus
Lappeenranta Campus
Teaching languages
- Finnish
Degree programmes
- Bachelor’s Degree Programme in Electrical and Automation Engineering (in Finnish)
Teachers
- Petteri Karkkulainen
Scheduling groups
- Luennot 1 (Size: 0. Open UAS: 0.)
Groups
-
TLPRSAT24S
Small groups
- Lecture 1
Learning outcomes
Student is able to
- understand the purpose of the physics in technology
- describe and utilize the SI-unit system and implement
- solve mathematical problems in kinematics, mechanics and thermodynamics
- utilize vectors
Assessment scale
1-5
Enrollment
20.11.2024 - 10.01.2025
Timing
07.01.2025 - 30.04.2025
Number of ECTS credits allocated
3 op
Virtual portion
3 op
Mode of delivery
Distance learning
Unit
Faculty of Technology (LAB)
Campus
E-campus
Teaching languages
- Finnish
Seats
0 - 200
Degree programmes
- Bachelor’s Degree Programme in Electrical and Automation Engineering (in Finnish)
Teachers
- Juha Pere
Scheduling groups
- Verkkoluento 1 (Size: 0. Open UAS: 0.)
Groups
-
TLTISAT25KM
Small groups
- Online lecture 1
Learning outcomes
Student is able to
- understand the purpose of the physics in technology
- describe and utilize the SI-unit system and implement
- solve mathematical problems in kinematics, mechanics and thermodynamics
- utilize vectors
Implementation and methods of teaching
Lectures, videos, exercises
Learning material and recommended literature
The pages in Moodle
Learning environment
Moodle, Zoom
Contents
SI-units
Basics of mechanics
Heat and energy
Force and vectors
Efficiency
Assessment scale
1-5
Enrollment
06.05.2024 - 30.08.2024
Timing
02.09.2024 - 31.12.2024
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Unit
Faculty of Technology (LAB)
Campus
Lahti Campus
Teaching languages
- Finnish
Seats
0 - 40
Degree programmes
- Bachelor’s Degree Programme in Electrical and Automation Engineering (in Finnish)
Teachers
- Ari Vesikko
Scheduling groups
- Luennot 1 (Size: 0. Open UAS: 0.)
Groups
-
TLTISAT24S
Small groups
- Lecture 1
Learning outcomes
The student is able to
- interpret technical drawings
- create simple technical drawings using computer aided design
Assessment scale
1-5
Enrollment
20.11.2024 - 03.01.2025
Timing
07.01.2025 - 29.04.2025
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Unit
Faculty of Technology (LAB)
Campus
Lappeenranta Campus
Teaching languages
- Finnish
Degree programmes
- Bachelor’s Degree Programme in Electrical and Automation Engineering (in Finnish)
Teachers
- Jukka Nisonen
Scheduling groups
- Luennot 1 (Size: 0. Open UAS: 0.)
Groups
-
TLPRSAT24S
Small groups
- Lecture 1
Learning outcomes
The student is able to
- interpret technical drawings
- create simple technical drawings using computer aided design
Assessment scale
1-5
Enrollment
20.11.2024 - 10.01.2025
Timing
01.01.2025 - 31.07.2025
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Unit
Faculty of Technology (LAB)
Campus
E-campus
Teaching languages
- Finnish
Degree programmes
- Bachelor’s Degree Programme in Electrical and Automation Engineering (in Finnish)
Teachers
- Reijo Heikkinen
Scheduling groups
- Verkkoluento 1 (Size: 0. Open UAS: 0.)
Groups
-
TLTISAT25KM
Small groups
- Online lecture 1
Learning outcomes
The student is able to
- interpret technical drawings
- create simple technical drawings using computer aided design
Assessment scale
1-5
Enrollment
06.05.2024 - 30.08.2024
Timing
01.08.2024 - 31.12.2024
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Unit
Faculty of Technology (LAB)
Campus
Lahti Campus
Teaching languages
- Finnish
Degree programmes
- Bachelor’s Degree Programme in Electrical and Automation Engineering (in Finnish)
Teachers
- Petteri Valtonen
Scheduling groups
- Toteutuksen opetusryhmä 1 (Size: 0. Open UAS: 0.)
Groups
-
TLTISAT23S
Small groups
- Scheduling group 1
Learning outcomes
The student is able to
- utilise CAD software as a tool in electric design
- read and create technical documentation related to electric design
- design an electric cabinet, select and dimension its components
- dimension and select cables
- design overload and short circuit protection
Assessment scale
1-5
Enrollment
20.11.2024 - 03.01.2025
Timing
01.01.2025 - 31.05.2025
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Unit
Faculty of Technology (LAB)
Campus
E-campus
Teaching languages
- Finnish
Degree programmes
- Bachelor’s Degree Programme in Electrical and Automation Engineering (in Finnish)
Teachers
- Teemu Heino
Scheduling groups
- Luennot (Size: 0. Open UAS: 0.)
Groups
-
TLTISAT24KM
Small groups
- Lecture
Learning outcomes
The student is able to
- utilise CAD software as a tool in electric design
- read and create technical documentation related to electric design
- design an electric cabinet, select and dimension its components
- dimension and select cables
- design overload and short circuit protection
Assessment scale
1-5
Enrollment
20.11.2024 - 03.01.2025
Timing
01.01.2025 - 31.07.2025
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Unit
Faculty of Technology (LAB)
Campus
Lahti Campus
Teaching languages
- Finnish
Seats
0 - 45
Degree programmes
- Bachelor’s Degree Programme in Electrical and Automation Engineering (in Finnish)
Teachers
- Timo Lahtinen
Scheduling groups
- Teollisuusrobotiikan perusteet 1 (Size: 0. Open UAS: 0.)
Groups
-
TLTISAT23S
Small groups
- Lecture 1
Learning outcomes
Student is able to
- use robotics in different applications
Assessment scale
1-5
Enrollment
06.05.2024 - 30.08.2024
Timing
01.08.2024 - 06.12.2024
Number of ECTS credits allocated
5 op
Virtual portion
5 op
Mode of delivery
Distance learning
Unit
Faculty of Technology (LAB)
Campus
E-campus
Teaching languages
- Finnish
Degree programmes
- Bachelor’s Degree Programme in Electrical and Automation Engineering (in Finnish)
Teachers
- Kristian Rintala
Scheduling groups
- Itsenäinen 1 (Size: 0. Open UAS: 0.)
Groups
-
TLTISAT24S
-
TLTISAT23S
-
TLPRSAT24S
Small groups
- 1
Learning outcomes
Student is able to
- apply different manufacturing methods for different materials
- recognise common manufacturing methods
Assessment scale
1-5
Enrollment
06.05.2024 - 30.08.2024
Timing
02.09.2024 - 13.12.2024
Number of ECTS credits allocated
3 op
Mode of delivery
Contact teaching
Unit
Faculty of Technology (LAB)
Campus
- E-campus
- Lahti Campus
Teaching languages
- Finnish
Degree programmes
- Bachelor’s Degree Programme in Electrical and Automation Engineering (in Finnish)
Teachers
- Henri Koukka
- Karri Miettinen
Scheduling groups
- Luennot (Size: 500. Open UAS: 0.)
Groups
-
TLTISAT24S
-
TLTISAT24KM
-
TLPRSAT24S
Small groups
- Lecture
Learning outcomes
A student can:
- utilize JavaScript language to create dynamic web content
- utilize open source JavaScript libraries
- use css-preprocessor in creation and modification of css files
Assessment scale
1-5