Mathematics in Technology 2Laajuus (3 cr)
Code: AT00BT69
Credits
3 op
Responsible person
- Päivi Porras
Objective
Student is able to:
- derivate functions and utilise derivation in practice
- integrate polynomial functions and utilise integration in practice
- solve other equations and trigonometrical problems
Enrollment
06.05.2024 - 30.08.2024
Timing
02.09.2024 - 13.12.2024
Number of ECTS credits allocated
3 op
Virtual portion
3 op
Mode of delivery
Distance learning
Unit
Faculty of Technology (LAB)
Campus
E-campus, Lahti
Teaching languages
- Finnish
Degree programmes
- Bachelor's Degree Programme in Information Technology
Teachers
- Juha Hyytiäinen
Scheduling groups
- Luennot 1 (Size: 500. Open UAS: 0.)
Groups
-
TLTITVT23SV
Small groups
- Lecture 1
Learning outcomes
Student is able to:
- derivate functions and utilise derivation in practice
- integrate polynomial functions and utilise integration in practice
- solve other equations and trigonometrical problems
Assessment scale
1-5
Enrollment
06.05.2024 - 30.08.2024
Timing
02.09.2024 - 22.12.2024
Number of ECTS credits allocated
3 op
Mode of delivery
Contact teaching
Unit
Faculty of Technology (LAB)
Campus
Lappeenranta Campus
Teaching languages
- Finnish
Degree programmes
- Bachelor's Degree Programme in Civil and Construction Engineering, Construction Engineering (2021, 2022, 2023)
- Bachelor's Degree Programme in Civil and Construction Engineering, Infrastructure Engineering (2022, 2023)
Teachers
- Petteri Karkkulainen
Scheduling groups
- Luennot 1 (Size: 0. Open UAS: 0.)
Groups
-
TLPRINFRA23S
-
TLPRTRT23S
Small groups
- Lecture 1
Learning outcomes
Student is able to:
- derivate functions and utilise derivation in practice
- integrate polynomial functions and utilise integration in practice
- solve other equations and trigonometrical problems
Implementation and methods of teaching
Contact lectures
Learning material and recommended literature
will be informed at the beginning of the course.
Learning environment
Contact lectures with material in moodle.
Contents
- Composite and inverse functions
- Trigonometric functions and equations
- Derivatives of polynomial and rational functions
- Derivatives of exponential and logarithmic functions
- Derivatives of trigonometric and arc functions
- Extremes
- Applying differentiation
- Integrals of polynomial functions
- Area with integrals
- Volume with integrals
Additional information for students: previous knowledge etc.
Tekniikan matematiikka 1
Assessment criteria
Exercises and tests
Assessment scale
1-5
Failed (0)
A student cannot solve mechanical exercises well enough. Less than 33% of maximum scores.
Assessment criteria: level 1 (assessment scale 1–5)
A student knows methods for geometry in plain and for vectors in plain and can solve simple mechanical exercises.
Assessment criteria: level 3 (assessment scale 1–5)
A student understands requirements of geometry and vectors in plain and is able to apply them in some extent in engineering problems. At least 57% of maximum scores.
Assessment criteria: level 5 (assessment scale 1–5)
A student masters geometry and vectors in plain and is able to analyze engineering problems. At least 83 % of maximum scores.
Enrollment
06.05.2024 - 08.06.2025
Timing
01.08.2024 - 31.07.2025
Number of ECTS credits allocated
3 op
Mode of delivery
Contact teaching
Unit
Faculty of Technology (LAB)
Campus
E-campus
Teaching languages
- Finnish
Seats
1 - 100
Degree programmes
- Complementary competence and optional courses, Bachelors
Teachers
- Päivi Porras
Groups
-
TLABTO24H
Learning outcomes
Student is able to:
- derivate functions and utilise derivation in practice
- integrate polynomial functions and utilise integration in practice
- solve other equations and trigonometrical problems
Implementation and methods of teaching
Self-paced online course.
Automatically checked assignments award points to complete the course. Assignments alone can pass the course, but higher grades require participation in an applied exam.
Learning material and recommended literature
will be informed at the beginning of the course.
Learning environment
Material is in moodle.
Contents
- Composite and inverse functions
- Trigonometric functions and equations
- Derivatives of polynomial and rational functions
- Derivatives of exponential and logarithmic functions
- Derivatives of trigonometric and arc functions
- Extremes
- Applying differentiation
- Integrals of polynomial functions
- Area with integrals
- Volume with integrals
Additional information for students: previous knowledge etc.
Tekniikan matematiikka 1
Assessment criteria
Exercises and applied test
Assessment scale
1-5
Failed (0)
A student cannot solve mechanical exercises well enough. Less than 33% of maximum scores.
Assessment criteria: level 1 (assessment scale 1–5)
A student knows methods formathematical methods and can solve simple mechanical exercises.
Assessment criteria: level 3 (assessment scale 1–5)
A student understands requirements mathematical methods and is able to apply them in some extent in engineering problems. At least 57% of maximum scores.
Assessment criteria: level 5 (assessment scale 1–5)
A student masters mathematical methods and is able to analyze engineering problems. At least 83 % of maximum scores.
Enrollment
20.11.2023 - 05.01.2024
Timing
01.01.2024 - 31.07.2024
Number of ECTS credits allocated
3 op
Virtual portion
3 op
Mode of delivery
Distance learning
Unit
Faculty of Technology (LAB)
Campus
E-campus, Lahti
Teaching languages
- Finnish
Degree programmes
- Bachelor's Degree Programme in Information Technology
Teachers
- Juha Hyytiäinen
Scheduling groups
- Luennot 1 (Size: 500. Open UAS: 0.)
Groups
-
TLTITVT23KM
Small groups
- Lecture 1
Learning outcomes
Student is able to:
- derivate functions and utilise derivation in practice
- integrate polynomial functions and utilise integration in practice
- solve other equations and trigonometrical problems
Assessment scale
1-5
Enrollment
16.03.2023 - 30.04.2024
Timing
01.08.2023 - 31.07.2024
Number of ECTS credits allocated
3 op
Virtual portion
3 op
Mode of delivery
Distance learning
Unit
Faculty of Technology (LAB)
Campus
E-campus
Teaching languages
- Finnish
Seats
1 - 500
Degree programmes
- Summer studies
Teachers
- Päivi Porras
Groups
-
TLABTO22H
-
LABKES23KH
Learning outcomes
Student is able to:
- derivate functions and utilise derivation in practice
- integrate polynomial functions and utilise integration in practice
- solve other equations and trigonometrical problems
Implementation and methods of teaching
Self-paced online course.
Automatically checked assignments award points to complete the course. Assignments alone can pass the course, but higher grades require participation in an applied exam.
Learning material and recommended literature
will be informed at the beginning of the course.
Learning environment
Material is in moodle.
Contents
- Composite and inverse functions
- Trigonometric functions and equations
- Derivatives of polynomial and rational functions
- Derivatives of exponential and logarithmic functions
- Derivatives of trigonometric and arc functions
- Extremes
- Applying differentiation
- Integrals of polynomial functions
- Area with integrals
- Volume with integrals
Additional information for students: previous knowledge etc.
Tekniikan matematiikka 1
Assessment criteria
Exercises and applied test
Assessment scale
1-5
Failed (0)
A student cannot solve mechanical exercises well enough. Less than 33% of maximum scores.
Assessment criteria: level 1 (assessment scale 1–5)
A student knows methods formathematical methods and can solve simple mechanical exercises.
Assessment criteria: level 3 (assessment scale 1–5)
A student understands requirements mathematical methods and is able to apply them in some extent in engineering problems. At least 57% of maximum scores.
Assessment criteria: level 5 (assessment scale 1–5)
A student masters mathematical methods and is able to analyze engineering problems. At least 83 % of maximum scores.
Enrollment
20.11.2023 - 05.01.2024
Timing
08.01.2024 - 03.05.2024
Number of ECTS credits allocated
3 op
Virtual portion
3 op
Mode of delivery
Distance learning
Unit
Faculty of Technology (LAB)
Campus
E-campus, Lahti
Teaching languages
- Finnish
Seats
1 - 100
Degree programmes
- Bachelor's Degree Programme in Mechanical Engineering
- Bachelor’s Degree Programme in Environmental Engineering
- Bachelor’s Degree Programme in Wood Technology
Teachers
- Päivi Porras
- Perttu Laivamaa
Scheduling groups
- Verkkoluento ryhmä A (Size: 0. Open UAS: 0.)
- Verkkoluento ryhmä B (Size: 0. Open UAS: 0.)
Groups
-
TLTIENTEC23KM
-
TLTIKONE23KV
-
TLTIPUU23KV
Small groups
- Online lecture group A
- Online lecture group A
Learning outcomes
Student is able to:
- derivate functions and utilise derivation in practice
- integrate polynomial functions and utilise integration in practice
- solve other equations and trigonometrical problems
Implementation and methods of teaching
Online lectures
Learning material and recommended literature
will be informed at the beginning of the course.
Learning environment
Online lectures with material in moodle.
Contents
- Composite and inverse functions
- Trigonometric functions and equations
- Derivatives of polynomial and rational functions
- Derivatives of exponential and logarithmic functions
- Derivatives of trigonometric and arc functions
- Extremes
- Applying differentiation
- Integrals of polynomial functions
- Area with integrals
- Volume with integrals
Additional information for students: previous knowledge etc.
Tekniikan matematiikka 1
Assessment criteria
Exercises and tests
Assessment scale
1-5
Failed (0)
A student cannot solve mechanical exercises well enough. Less than 33% of maximum scores.
Assessment criteria: level 1 (assessment scale 1–5)
A student knows methods formathematical methods and can solve simple mechanical exercises.
Assessment criteria: level 3 (assessment scale 1–5)
A student understands requirements mathematical methods and is able to apply them in some extent in engineering problems. At least 57% of maximum scores.
Assessment criteria: level 5 (assessment scale 1–5)
A student masters mathematical methods and is able to analyze engineering problems. At least 83 % of maximum scores.
Enrollment
15.05.2023 - 01.09.2023
Timing
11.09.2023 - 13.12.2023
Number of ECTS credits allocated
3 op
Virtual portion
3 op
Mode of delivery
Distance learning
Unit
Faculty of Technology (LAB)
Campus
E-campus
Teaching languages
- Finnish
Seats
1 - 500
Degree programmes
- Bachelor's Degree Programme in Mechanical Engineering
- Bachelor's Degree Programme in Civil and Construction Engineering, Construction Engineering (2021, 2022, 2023)
- Bachelor's Degree Programme in Civil and Construction Engineering, Urban Planning (2022, 2023)
- Bachelor's Degree Programme in Civil and Construction Engineering, Infrastructure Engineering (2022, 2023)
- Bachelor’s Degree Programme in Wood Technology
Teachers
- Päivi Porras
Scheduling groups
- Verkko (Size: 0. Open UAS: 0.)
Groups
-
TLPRINFRA22S
-
TLTIYKS22S
-
TLPRTRT22S
-
TLPRKONE22S
-
TLTIPUU22S
-
TLTIKONE22S
Small groups
- Verkko
Learning outcomes
Student is able to:
- derivate functions and utilise derivation in practice
- integrate polynomial functions and utilise integration in practice
- solve other equations and trigonometrical problems
Implementation and methods of teaching
Contact lectures
Learning material and recommended literature
will be informed at the beginning of the course.
Learning environment
Contact lectures with material in moodle.
Contents
- Composite and inverse functions
- Trigonometric functions and equations
- Derivatives of polynomial and rational functions
- Derivatives of exponential and logarithmic functions
- Derivatives of trigonometric and arc functions
- Extremes
- Applying differentiation
- Integrals of polynomial functions
- Area with integrals
- Volume with integrals
Additional information for students: previous knowledge etc.
Tekniikan matematiikka 1
Assessment criteria
Exercises and tests
Assessment scale
1-5
Failed (0)
A student cannot solve mechanical exercises well enough. Less than 33% of maximum scores.
Assessment criteria: level 1 (assessment scale 1–5)
A student knows methods for geometry in plain and for vectors in plain and can solve simple mechanical exercises.
Assessment criteria: level 3 (assessment scale 1–5)
A student understands requirements of geometry and vectors in plain and is able to apply them in some extent in engineering problems. At least 57% of maximum scores.
Assessment criteria: level 5 (assessment scale 1–5)
A student masters geometry and vectors in plain and is able to analyze engineering problems. At least 83 % of maximum scores.
Enrollment
15.05.2023 - 01.09.2023
Timing
04.09.2023 - 15.12.2023
Number of ECTS credits allocated
3 op
Virtual portion
3 op
Mode of delivery
Distance learning
Unit
Faculty of Technology (LAB)
Campus
E-campus, Lahti
Teaching languages
- Finnish
Degree programmes
- Bachelor's Degree Programme in Information Technology
Teachers
- Tommi Veijalainen
Scheduling groups
- Luennot 1 (Size: 500. Open UAS: 0.)
Groups
-
TLTITVT22SV
Small groups
- Lecture 1
Learning outcomes
Student is able to:
- derivate functions and utilise derivation in practice
- integrate polynomial functions and utilise integration in practice
- solve other equations and trigonometrical problems
Assessment scale
1-5
Enrollment
15.05.2023 - 01.09.2023
Timing
04.09.2023 - 31.12.2023
Number of ECTS credits allocated
3 op
Virtual portion
1 op
Mode of delivery
67 % Contact teaching, 33 % Distance learning
Unit
Faculty of Technology (LAB)
Campus
Lahti Campus
Teaching languages
- Finnish
Seats
0 - 100
Degree programmes
- Bachelor's Degree Programme in Mechanical Engineering
- Bachelor's Degree Programme in Civil and Construction Engineering, Urban Planning (2022, 2023)
- Bachelor’s Degree Programme in Wood Technology
Teachers
- Erjaleena Koljonen
- Tiina Valkonen
Scheduling groups
- A-ryhmä (Size: 0. Open UAS: 0.)
- B-ryhmä (Size: 0. Open UAS: 0.)
Groups
-
TLTIYKS22S
-
TLTIPUU22S
-
TLTIKONE22S
Small groups
- Luennot 1
- Luennot 2
Learning outcomes
Student is able to:
- derivate functions and utilise derivation in practice
- integrate polynomial functions and utilise integration in practice
- solve other equations and trigonometrical problems
Assessment scale
1-5
Enrollment
15.05.2023 - 01.09.2023
Timing
04.09.2023 - 31.12.2023
Number of ECTS credits allocated
3 op
Mode of delivery
Contact teaching
Unit
Faculty of Technology (LAB)
Campus
Lappeenranta Campus
Teaching languages
- Finnish
Degree programmes
- Bachelor's Degree Programme in Mechanical Engineering
- Bachelor's Degree Programme in Civil and Construction Engineering, Construction Engineering (2021, 2022, 2023)
- Bachelor's Degree Programme in Civil and Construction Engineering, Infrastructure Engineering (2022, 2023)
Teachers
- Perttu Laivamaa
- Petteri Karkkulainen
Scheduling groups
- R1 (Size: 0. Open UAS: 0.)
- R2 (Size: 0. Open UAS: 0.)
Groups
-
TLPRINFRA22S
-
TLPRTRT22S
-
TLPRKONE22S
Small groups
- R1
- R2
Learning outcomes
Student is able to:
- derivate functions and utilise derivation in practice
- integrate polynomial functions and utilise integration in practice
- solve other equations and trigonometrical problems
Implementation and methods of teaching
Contact lectures
Learning material and recommended literature
will be informed at the beginning of the course.
Learning environment
Contact lectures with material in moodle.
Contents
- Composite and inverse functions
- Trigonometric functions and equations
- Derivatives of polynomial and rational functions
- Derivatives of exponential and logarithmic functions
- Derivatives of trigonometric and arc functions
- Extremes
- Applying differentiation
- Integrals of polynomial functions
- Area with integrals
- Volume with integrals
Additional information for students: previous knowledge etc.
Tekniikan matematiikka 1
Assessment criteria
Exercises and tests
Assessment scale
1-5
Failed (0)
A student cannot solve mechanical exercises well enough. Less than 33% of maximum scores.
Assessment criteria: level 1 (assessment scale 1–5)
A student knows methods for geometry in plain and for vectors in plain and can solve simple mechanical exercises.
Assessment criteria: level 3 (assessment scale 1–5)
A student understands requirements of geometry and vectors in plain and is able to apply them in some extent in engineering problems. At least 57% of maximum scores.
Assessment criteria: level 5 (assessment scale 1–5)
A student masters geometry and vectors in plain and is able to analyze engineering problems. At least 83 % of maximum scores.
Enrollment
21.11.2022 - 08.01.2023
Timing
09.01.2023 - 31.05.2023
Number of ECTS credits allocated
3 op
Virtual portion
3 op
Mode of delivery
Distance learning
Unit
Faculty of Technology (LAB)
Campus
E-campus
Teaching languages
- Finnish
Seats
5 - 200
Degree programmes
- Bachelor's Degree Programme in Mechanical Engineering
- Bachelor’s Degree Programme in Environmental Engineering
- Bachelor’s Degree Programme in Wood Technology
Teachers
- Heidi Rutila
- Tiina Valkonen
Scheduling groups
- 1-ryhmä luennot (Size: 0. Open UAS: 0.)
- 2-ryhmä luennot (Size: 0. Open UAS: 0.)
Groups
-
TLTIKONE22KM
-
TLTIPUU22KM
-
TLTIENTEC22KM
Small groups
- Luennot 1
- Luennot 2
Learning outcomes
Student is able to:
- derivate functions and utilise derivation in practice
- integrate polynomial functions and utilise integration in practice
- solve other equations and trigonometrical problems
Assessment scale
1-5
Enrollment
21.11.2022 - 08.01.2023
Timing
09.01.2023 - 31.05.2023
Number of ECTS credits allocated
3 op
Mode of delivery
Contact teaching
Unit
Faculty of Technology (LAB)
Campus
Lahti Campus
Teaching languages
- Finnish
Seats
5 - 40
Degree programmes
- Bachelor’s Degree Programme in Wood Technology
Teachers
- Tiina Valkonen
Scheduling groups
- Luennot (Size: 0. Open UAS: 0.)
Groups
-
TLTIPUU21S
Small groups
- Luennot
Learning outcomes
Student is able to:
- derivate functions and utilise derivation in practice
- integrate polynomial functions and utilise integration in practice
- solve other equations and trigonometrical problems
Assessment scale
1-5
Enrollment
21.11.2022 - 08.01.2023
Timing
09.01.2023 - 31.05.2023
Number of ECTS credits allocated
3 op
Virtual portion
3 op
Mode of delivery
Distance learning
Unit
Faculty of Technology (LAB)
Campus
E-campus
Teaching languages
- Finnish
Seats
5 - 100
Degree programmes
- Bachelor's Degree Programme in Mechanical Engineering
- Bachelor's Degree Programme in Civil and Construction Engineering, Construction Engineering (2021, 2022, 2023)
- Bachelor's Degree Programme in Civil and Construction Engineering, Urban Planning (2022, 2023)
- Bachelor’s Degree Programme in Wood Technology
- Bachelor's Degree Programme in Civil and Construction Engineering, Infrastructure Engineering (2022, 2023)
Teachers
- Päivi Porras
Scheduling groups
- Verkkoluento (Size: 0. Open UAS: 0.)
Groups
-
TLPRINFRA22S
-
TLTIPUU20S
-
TLTIYKS22S
-
TLPRTRT22S
-
TLPRKONE22S
-
TLTIKONE22S
Small groups
- Online lectures
Learning outcomes
Student is able to:
- derivate functions and utilise derivation in practice
- integrate polynomial functions and utilise integration in practice
- solve other equations and trigonometrical problems
Implementation and methods of teaching
Contact lectures
Learning material and recommended literature
will be informed at the beginning of the course.
Learning environment
Online lectures with material in moodle.
Contents
- Composite and inverse functions
- Trigonometric functions and equations
- Derivatives of polynomial and rational functions
- Derivatives of exponential and logarithmic functions
- Derivatives of trigonometric and arc functions
- Extremes
- Applying differentiation
- Integrals of polynomial functions
- Area with integrals
- Volume with integrals
Additional information for students: previous knowledge etc.
Tekniikan matematiikka 1
Assessment criteria
Exercises and tests
Assessment scale
1-5
Failed (0)
A student cannot solve mechanical exercises well enough. Less than 33% of maximum scores.
Assessment criteria: level 1 (assessment scale 1–5)
A student knows methods formathematical methods and can solve simple mechanical exercises.
Assessment criteria: level 3 (assessment scale 1–5)
A student understands requirements mathematical methods and is able to apply them in some extent in engineering problems. At least 57% of maximum scores.
Assessment criteria: level 5 (assessment scale 1–5)
A student masters mathematical methods and is able to analyze engineering problems. At least 83 % of maximum scores.
Enrollment
21.11.2022 - 08.01.2023
Timing
01.01.2023 - 31.07.2023
Number of ECTS credits allocated
3 op
Mode of delivery
Contact teaching
Unit
Faculty of Technology (LAB)
Campus
Lahti Campus
Teaching languages
- Finnish
Degree programmes
- Bachelor's Degree Programme in Information Technology
Teachers
- Tommi Veijalainen
Scheduling groups
- Luennot 1 (Size: 500. Open UAS: 0.)
Groups
-
TLTITVT22K
Small groups
- Luennot 1
Learning outcomes
Student is able to:
- derivate functions and utilise derivation in practice
- integrate polynomial functions and utilise integration in practice
- solve other equations and trigonometrical problems
Assessment scale
1-5
Enrollment
02.05.2022 - 16.09.2022
Timing
08.09.2022 - 16.12.2022
Number of ECTS credits allocated
3 op
Virtual portion
3 op
Mode of delivery
Distance learning
Unit
Faculty of Technology (LAB)
Campus
E-campus, Lappeenranta
Teaching languages
- Finnish
Degree programmes
- Bachelor's Degree Programme in Mechanical Engineering
- Bachelor's Degree Programme in Civil and Construction Engineering, Construction Engineering (2021, 2022, 2023)
Teachers
- Päivi Porras
Scheduling groups
- Luennot 1 (Size: 0. Open UAS: 0.)
Groups
-
TLTIEYM21S
-
TLPRTRT21S
-
TLPRIYKT21S
-
TLPRKONE21S
-
TLTIKONE21S
Small groups
- Luennot 1
Learning outcomes
Student is able to:
- derivate functions and utilise derivation in practice
- integrate polynomial functions and utilise integration in practice
- solve other equations and trigonometrical problems
Implementation and methods of teaching
Contact lectures
Learning material and recommended literature
will be informed at the beginning of the course.
Learning environment
Contact lectures with material in moodle.
Contents
- Composite and inverse functions
- Trigonometric functions and equations
- Derivatives of polynomial and rational functions
- Derivatives of exponential and logarithmic functions
- Derivatives of trigonometric and arc functions
- Extremes
- Applying differentiation
- Integrals of polynomial functions
- Area with integrals
- Volume with integrals
Additional information for students: previous knowledge etc.
Tekniikan matematiikka 1
Assessment criteria
Exercises and tests
Assessment scale
1-5
Failed (0)
A student cannot solve mechanical exercises well enough. Less than 33% of maximum scores.
Assessment criteria: level 1 (assessment scale 1–5)
A student knows methods for geometry in plain and for vectors in plain and can solve simple mechanical exercises.
Assessment criteria: level 3 (assessment scale 1–5)
A student understands requirements of geometry and vectors in plain and is able to apply them in some extent in engineering problems. At least 57% of maximum scores.
Assessment criteria: level 5 (assessment scale 1–5)
A student masters geometry and vectors in plain and is able to analyze engineering problems. At least 83 % of maximum scores.
Enrollment
01.07.2022 - 04.09.2022
Timing
29.08.2022 - 16.12.2022
Number of ECTS credits allocated
3 op
Virtual portion
1 op
Mode of delivery
67 % Contact teaching, 33 % Distance learning
Unit
Faculty of Technology (LAB)
Campus
Lahti Campus
Teaching languages
- Finnish
Seats
0 - 100
Degree programmes
- Bachelor's Degree Programme in Mechanical Engineering
- Bachelor's Degree Programme in Energy and Environmental Engineering (2014-2021)
Teachers
- Heidi Rutila
- Erjaleena Koljonen
Scheduling groups
- A-ryhmä (Size: 0. Open UAS: 0.)
- B-ryhmä (Size: 0. Open UAS: 0.)
Groups
-
TLTIEYM21S
-
TLTIKONE21S
Small groups
- Luennot 1
- Luennot 2
Learning outcomes
Student is able to:
- derivate functions and utilise derivation in practice
- integrate polynomial functions and utilise integration in practice
- solve other equations and trigonometrical problems
Assessment scale
1-5
Enrollment
01.07.2022 - 04.09.2022
Timing
29.08.2022 - 16.12.2022
Number of ECTS credits allocated
3 op
Mode of delivery
Contact teaching
Unit
Faculty of Technology (LAB)
Campus
Lappeenranta Campus
Teaching languages
- Finnish
Degree programmes
- Bachelor's Degree Programme in Mechanical Engineering
- Bachelor's Degree Programme in Civil and Construction Engineering, Construction Engineering (2021, 2022, 2023)
Teachers
- Päivi Porras
- Petteri Karkkulainen
Scheduling groups
- Luennot 1 (Size: 0. Open UAS: 0.)
- Luennot 2 (Size: 0. Open UAS: 0.)
Groups
-
TLPRTRT21S
-
TLPRIYKT21S
-
TLPRKONE21S
Small groups
- Luennot 1
- Luennot 2
Learning outcomes
Student is able to:
- derivate functions and utilise derivation in practice
- integrate polynomial functions and utilise integration in practice
- solve other equations and trigonometrical problems
Implementation and methods of teaching
Contact lectures
Learning material and recommended literature
will be informed at the beginning of the course.
Learning environment
Contact lectures with material in moodle.
Contents
- Composite and inverse functions
- Trigonometric functions and equations
- Derivatives of polynomial and rational functions
- Derivatives of exponential and logarithmic functions
- Derivatives of trigonometric and arc functions
- Extremes
- Applying differentiation
- Integrals of polynomial functions
- Area with integrals
- Volume with integrals
Additional information for students: previous knowledge etc.
Tekniikan matematiikka 1
Assessment criteria
Exercises and tests
Assessment scale
1-5
Failed (0)
A student cannot solve mechanical exercises well enough. Less than 33% of maximum scores.
Assessment criteria: level 1 (assessment scale 1–5)
A student knows methods for geometry in plain and for vectors in plain and can solve simple mechanical exercises.
Assessment criteria: level 3 (assessment scale 1–5)
A student understands requirements of geometry and vectors in plain and is able to apply them in some extent in engineering problems. At least 57% of maximum scores.
Assessment criteria: level 5 (assessment scale 1–5)
A student masters geometry and vectors in plain and is able to analyze engineering problems. At least 83 % of maximum scores.
Enrollment
01.07.2022 - 04.09.2022
Timing
29.08.2022 - 16.12.2022
Number of ECTS credits allocated
3 op
Mode of delivery
Contact teaching
Unit
Faculty of Technology (LAB)
Campus
E-campus, Lahti
Teaching languages
- Finnish
Degree programmes
- Bachelor's Degree Programme in Information Technology
Teachers
- Tommi Veijalainen
- Juha Hyytiäinen
Scheduling groups
- Luennot 1 (Size: 200. Open UAS: 0.)
Groups
-
TLTITVT21SV
Small groups
- Luennot 1
Learning outcomes
Student is able to:
- derivate functions and utilise derivation in practice
- integrate polynomial functions and utilise integration in practice
- solve other equations and trigonometrical problems
Assessment scale
1-5
Enrollment
14.03.2022 - 19.04.2022
Timing
01.05.2022 - 31.08.2022
Number of ECTS credits allocated
3 op
Virtual portion
3 op
Mode of delivery
Distance learning
Unit
Faculty of Technology (LAB)
Campus
E-campus
Teaching languages
- Finnish
Seats
0 - 50
Degree programmes
- Summer studies
Teachers
- Heidi Rutila
- Erjaleena Koljonen
Groups
-
LABLPRKES22KH
-
LABLTIKES22KH
Learning outcomes
Student is able to:
- derivate functions and utilise derivation in practice
- integrate polynomial functions and utilise integration in practice
- solve other equations and trigonometrical problems
Assessment scale
1-5
Enrollment
19.11.2021 - 23.01.2022
Timing
10.01.2022 - 31.05.2022
Number of ECTS credits allocated
3 op
Virtual portion
3 op
Mode of delivery
Distance learning
Unit
Faculty of Technology (LAB)
Campus
E-campus, Lappeenranta
Teaching languages
- Finnish
Seats
1 - 99
Degree programmes
- Bachelor's Degree Programme in Civil and Construction Engineering, Construction Engineering (2021, 2022, 2023)
- Bachelor's Degree Programme in Civil and Construction Engineering, Civil Engineering (2021)
Teachers
- Päivi Porras
Scheduling groups
- R3 (Size: 0. Open UAS: 0.)
Groups
-
TLTIEYM21S
-
TLPRTRT21S
-
TLPRIYKT21S
-
TLTIPUU21S
-
TLPRKONE21S
-
TLTIKONE21S
Small groups
- R3
Learning outcomes
Student is able to:
- derivate functions and utilise derivation in practice
- integrate polynomial functions and utilise integration in practice
- solve other equations and trigonometrical problems
Assessment scale
1-5
Enrollment
19.11.2021 - 09.01.2022
Timing
01.01.2022 - 31.07.2022
Number of ECTS credits allocated
3 op
Virtual portion
2 op
Mode of delivery
34 % Contact teaching, 66 % Distance learning
Unit
Faculty of Technology (LAB)
Campus
Lahti Campus
Teaching languages
- Finnish
Seats
5 - 50
Degree programmes
- Bachelor's Degree Programme in Mechanical Engineering
Teachers
- Erjaleena Koljonen
Scheduling groups
- Luennot 1 (Size: 0. Open UAS: 0.)
Groups
-
TLTIKONE21KMLTI
Small groups
- Luennot 1
Learning outcomes
Student is able to:
- derivate functions and utilise derivation in practice
- integrate polynomial functions and utilise integration in practice
- solve other equations and trigonometrical problems
Assessment scale
1-5
Enrollment
19.11.2021 - 09.01.2022
Timing
01.01.2022 - 31.07.2022
Number of ECTS credits allocated
3 op
Mode of delivery
Contact teaching
Unit
Faculty of Technology (LAB)
Campus
Lahti Campus
Teaching languages
- Finnish
Degree programmes
- Bachelor's Degree Programme in Information Technology
Teachers
- Tommi Veijalainen
- Juha Hyytiäinen
Scheduling groups
- Luennot 1 (Size: 0. Open UAS: 0.)
Groups
-
TLTITVT21K
Small groups
- Luennot 1
Learning outcomes
Student is able to:
- derivate functions and utilise derivation in practice
- integrate polynomial functions and utilise integration in practice
- solve other equations and trigonometrical problems
Assessment scale
1-5