Basic studies in mathematicsLaajuus (3 cr)
Code: AT00BT67
Credits
3 op
Objective
Student is able to
- calculate and simulate mathematical expressions
- solve geometric and trigonometric problems
- knows bacis of vectors in plane
Enrollment
20.11.2024 - 03.01.2025
Timing
07.01.2025 - 18.04.2025
Number of ECTS credits allocated
3 op
Virtual portion
1 op
Mode of delivery
67 % Contact teaching, 33 % Distance learning
Unit
Faculty of Technology (LAB)
Campus
Lahti Campus
Teaching languages
- Finnish
Seats
5 - 50
Degree programmes
- Bachelor’s Degree Programme in Wood Technology (in Finnish)
Teachers
- Erjaleena Koljonen
Scheduling groups
- Luennot 1 (Size: 0. Open UAS: 0.)
Groups
-
TLTIPUU24S
Small groups
- Lecture 1
Learning outcomes
Student is able to
- calculate and simulate mathematical expressions
- solve geometric and trigonometric problems
- knows bacis of vectors in plane
Assessment scale
1-5
Enrollment
20.11.2024 - 03.01.2025
Timing
07.01.2025 - 30.04.2025
Number of ECTS credits allocated
3 op
Mode of delivery
Contact teaching
Unit
Faculty of Technology (LAB)
Campus
E-campus
Teaching languages
- Finnish
Degree programmes
- Bachelor's Degree Programme in Sustainable Urban Planning (in Finnish)
Teachers
- Päivi Porras
Scheduling groups
- Verkkoluento 1 (Size: 0. Open UAS: 0.)
Groups
-
TLTIKKS24SM
Small groups
- Online lecture 1
Learning outcomes
Student is able to
- calculate and simulate mathematical expressions
- solve geometric and trigonometric problems
- knows bacis of vectors in plane
Implementation and methods of teaching
Automatically checked assignments award points to complete the course. Assignments alone can pass the course, but higher grades require participation in an applied exam.
Learning material and recommended literature
All material is available in moodle.
Learning environment
The course is studied with material in moodle.
Contents
- Percentages, polynomial equations (1. and 2. degree), systems of two linear equations: word problems
- Basics of trigonometry (right-angled triangle, non-right angled triangle, unit circle)
- Geometry in plain
- Vectors in plain
Review on topics of Johdatus matematiikkaan (Introduction to mathematics), if needed.
Additional information for students: previous knowledge etc.
Johdatus matematiikkaan (Introduction to mathematics) or corresponding knowledge from expressions, unit transformation, equations, and system of two equations.
Assessment criteria
Exercises and an applied test.
Assessment scale
1-5
Failed (0)
A student cannot solve mechanical exercises well enough. Less than 33% of maximum scores.
Assessment criteria: level 1 (assessment scale 1–5)
A student knows methods for geometry in plain and for vectors in plain and can solve simple mechanical exercises.
Assessment criteria: level 3 (assessment scale 1–5)
A student understands requirements of geometry and vectors in plain and is able to apply them in some extent in engineering problems. At least 57% of maximum scores.
Assessment criteria: level 5 (assessment scale 1–5)
A student masters geometry and vectors in plain and is able to analyze engineering problems. At least 83 % of maximum scores.
Enrollment
15.11.2024 - 08.06.2025
Timing
01.08.2024 - 31.07.2025
Number of ECTS credits allocated
3 op
Virtual portion
3 op
Mode of delivery
Distance learning
Unit
Faculty of Technology (LAB)
Campus
E-campus
Teaching languages
- Finnish
Seats
0 - 300
Degree programmes
- Complementary competence, Bachelor's (in Finnish)
Teachers
- Päivi Porras
Scheduling groups
- Avoimen ammattikorkeakoulun kiintiö (Size: 20. Open UAS: 20.)
Groups
-
TLABTO24H
Small groups
- Open UAS quota
Learning outcomes
Student is able to
- calculate and simulate mathematical expressions
- solve geometric and trigonometric problems
- knows bacis of vectors in plane
Implementation and methods of teaching
Self-paced online course.
Automatically checked assignments award points to complete the course. Assignments alone can pass the course, but higher grades require participation in an applied exam.
Learning material and recommended literature
All material is available in moodle.
Learning environment
The course is studied with material in moodle.
Contents
- Percentages, polynomial equations (1. and 2. degree), systems of two linear equations: word problems
- Basics of trigonometry (right-angled triangle, non-right angled triangle, unit circle)
- Geometry in plain
- Vectors in plain
Review on topics of Johdatus matematiikkaan (Introduction to mathematics), if needed.
Additional information for students: previous knowledge etc.
Johdatus matematiikkaan (Introduction to mathematics) or corresponding knowledge from expressions, unit transformation, equations, and system of two equations.
Assessment criteria
Exercises and an applied test.
Assessment scale
1-5
Failed (0)
A student cannot solve mechanical exercises well enough. Less than 33% of maximum scores.
Assessment criteria: level 1 (assessment scale 1–5)
A student knows methods for geometry in plain and for vectors in plain and can solve simple mechanical exercises.
Assessment criteria: level 3 (assessment scale 1–5)
A student understands requirements of geometry and vectors in plain and is able to apply them in some extent in engineering problems. At least 57% of maximum scores.
Assessment criteria: level 5 (assessment scale 1–5)
A student masters geometry and vectors in plain and is able to analyze engineering problems. At least 83 % of maximum scores.
Enrollment
06.05.2024 - 30.08.2024
Timing
30.09.2024 - 22.12.2024
Number of ECTS credits allocated
3 op
Mode of delivery
Contact teaching
Unit
Faculty of Technology (LAB)
Campus
Lappeenranta Campus
Teaching languages
- Finnish
Degree programmes
- Bachelor's Degree Programme in Construction Engineering (in Finnish)
Teachers
- Petteri Karkkulainen
Scheduling groups
- Luennot 1 (Size: 0. Open UAS: 0.)
Groups
-
TLPRRAK24S
Small groups
- Lecture 1
Learning outcomes
Student is able to
- calculate and simulate mathematical expressions
- solve geometric and trigonometric problems
- knows bacis of vectors in plane
Learning material and recommended literature
All material is available in moodle.
Learning environment
The course is studied with material in moodle.
Contents
- Percentages, polynomial equations (1. and 2. degree), systems of two linear equations: word problems
- Basics of trigonometry (right-angled triangle, non-right angled triangle, unit circle)
- Geometry in plain
- Vectors in plain
Review on topics of Johdatus matematiikkaan (Introduction to mathematics), if needed.
Additional information for students: previous knowledge etc.
Johdatus matematiikkaan (Introduction to mathematics) or corresponding knowledge from expressions, unit transformation, equations, and system of two equations.
Assessment criteria
Exercises and an applied test.
Assessment scale
1-5
Failed (0)
A student cannot solve mechanical exercises well enough. Less than 33% of maximum scores.
Assessment criteria: level 1 (assessment scale 1–5)
A student knows methods for geometry in plain and for vectors in plain and can solve simple mechanical exercises.
Assessment criteria: level 3 (assessment scale 1–5)
A student understands requirements of geometry and vectors in plain and is able to apply them in some extent in engineering problems. At least 57% of maximum scores.
Assessment criteria: level 5 (assessment scale 1–5)
A student masters geometry and vectors in plain and is able to analyze engineering problems. At least 83 % of maximum scores.
Enrollment
06.05.2024 - 01.09.2024
Timing
02.09.2024 - 13.12.2024
Number of ECTS credits allocated
3 op
Virtual portion
3 op
Mode of delivery
Distance learning
Unit
Faculty of Technology (LAB)
Campus
E-campus, Lahti
Teaching languages
- Finnish
Seats
0 - 100
Degree programmes
- Bachelor’s Degree Programme in Wood Technology (in Finnish)
Teachers
- Tiina Valkonen
Scheduling groups
- Verkkoluento (Size: 0. Open UAS: 0.)
Groups
-
TLTIPUU24KV
Small groups
- Online lecture
Learning outcomes
Student is able to
- calculate and simulate mathematical expressions
- solve geometric and trigonometric problems
- knows bacis of vectors in plane
Assessment scale
1-5
Enrollment
06.05.2024 - 30.08.2024
Timing
02.09.2024 - 13.12.2024
Number of ECTS credits allocated
3 op
Virtual portion
3 op
Mode of delivery
Distance learning
Unit
Faculty of Technology (LAB)
Campus
E-campus, Lahti
Teaching languages
- Finnish
Degree programmes
- Bachelor's Degree Programme in Information Technology (in Finnish)
Teachers
- Juha Hyytiäinen
Scheduling groups
- Luennot 1 (Size: 500. Open UAS: 0.)
Groups
-
TLTITVT24SV
Small groups
- Lecture 1
Learning outcomes
Student is able to
- calculate and simulate mathematical expressions
- solve geometric and trigonometric problems
- knows bacis of vectors in plane
Assessment scale
1-5
Enrollment
20.11.2023 - 08.01.2024
Timing
08.01.2024 - 31.05.2024
Number of ECTS credits allocated
3 op
Mode of delivery
Contact teaching
Unit
Faculty of Technology (LAB)
Campus
Lahti Campus
Teaching languages
- Finnish
Degree programmes
- Bachelor’s Degree Programme in Wood Technology (in Finnish)
Teachers
- Tiina Valkonen
Scheduling groups
- Luennot (Size: 0. Open UAS: 0.)
- Laskuharjoitukset (Size: 0. Open UAS: 0.)
Groups
-
TLTIPUU23S
Small groups
- Lecture
- Practice 1
Learning outcomes
Student is able to
- calculate and simulate mathematical expressions
- solve geometric and trigonometric problems
- knows bacis of vectors in plane
Assessment scale
1-5
Enrollment
20.11.2023 - 12.01.2024
Timing
01.01.2024 - 31.07.2024
Number of ECTS credits allocated
3 op
Virtual portion
3 op
Mode of delivery
Distance learning
Unit
Faculty of Technology (LAB)
Campus
E-campus, Lahti
Teaching languages
- Finnish
Degree programmes
- Bachelor's Degree Programme in Mechanical Engineering (in Finnish)
- Bachelor’s Degree Programme in Environmental Engineering (in Finnish)
Teachers
- Heidi Rutila
- Erjaleena Koljonen
Scheduling groups
- A-ryhmä (Size: 0. Open UAS: 0.)
- B-ryhmä (Size: 0. Open UAS: 0.)
Groups
-
TLTIENTEC24KM
-
TLTIKONE24KV
Small groups
- Lecture 1
- Lecture 2
Learning outcomes
Student is able to
- calculate and simulate mathematical expressions
- solve geometric and trigonometric problems
- knows bacis of vectors in plane
Assessment scale
1-5
Enrollment
20.11.2023 - 05.01.2024
Timing
01.01.2024 - 31.07.2024
Number of ECTS credits allocated
3 op
Mode of delivery
Contact teaching
Unit
Faculty of Technology (LAB)
Campus
Lahti Campus
Teaching languages
- Finnish
Degree programmes
- Bachelor's Degree Programme in Civil and Construction Engineering, Urban Planning (in Finnish), (2022, 2023)
Teachers
- Heidi Rutila
Scheduling groups
- Luennot (Size: 0. Open UAS: 0.)
- Assaritunnit (Size: 0. Open UAS: 0.)
Groups
-
TLTIYKS23S
Small groups
- Lecture 1
- Lecture 2
Learning outcomes
Student is able to
- calculate and simulate mathematical expressions
- solve geometric and trigonometric problems
- knows bacis of vectors in plane
Assessment scale
1-5
Enrollment
15.05.2023 - 01.09.2023
Timing
04.09.2023 - 15.12.2023
Number of ECTS credits allocated
3 op
Virtual portion
3 op
Mode of delivery
Distance learning
Unit
Faculty of Technology (LAB)
Campus
E-campus, Lahti
Teaching languages
- Finnish
Degree programmes
- Bachelor's Degree Programme in Information Technology (in Finnish)
Teachers
- Tommi Veijalainen
Scheduling groups
- Luennot 1 (Size: 0. Open UAS: 0.)
Groups
-
TLTITVT23SV
Small groups
- Luennot 1
Learning outcomes
Student is able to
- calculate and simulate mathematical expressions
- solve geometric and trigonometric problems
- knows bacis of vectors in plane
Assessment scale
1-5
Enrollment
15.05.2023 - 01.09.2023
Timing
01.08.2023 - 31.12.2023
Number of ECTS credits allocated
3 op
Mode of delivery
Contact teaching
Unit
Faculty of Technology (LAB)
Campus
Lappeenranta Campus
Teaching languages
- Finnish
Degree programmes
- Bachelor's Degree Programme in Civil and Construction Engineering, Construction Engineering (in Finnish), (2021, 2022, 2023)
- Bachelor's Degree Programme in Civil and Construction Engineering, Infrastructure Engineering (in Finnish), (2022, 2023)
Teachers
- Petteri Karkkulainen
Scheduling groups
- Luennot 1 (Size: 0. Open UAS: 0.)
Groups
-
TLPRINFRA23S
-
TLPRTRT23S
Small groups
- Luennot 1
Learning outcomes
Student is able to
- calculate and simulate mathematical expressions
- solve geometric and trigonometric problems
- knows bacis of vectors in plane
Learning material and recommended literature
All material is available in moodle.
Learning environment
The course is studied with material in moodle.
Contents
- Percentages, polynomial equations (1. and 2. degree), systems of two linear equations: word problems
- Basics of trigonometry (right-angled triangle, non-right angled triangle, unit circle)
- Geometry in plain
- Vectors in plain
Review on topics of Johdatus matematiikkaan (Introduction to mathematics), if needed.
Additional information for students: previous knowledge etc.
Johdatus matematiikkaan (Introduction to mathematics) or corresponding knowledge from expressions, unit transformation, equations, and system of two equations.
Assessment criteria
Exercises and an applied test.
Assessment scale
1-5
Failed (0)
A student cannot solve mechanical exercises well enough. Less than 33% of maximum scores.
Assessment criteria: level 1 (assessment scale 1–5)
A student knows methods for geometry in plain and for vectors in plain and can solve simple mechanical exercises.
Assessment criteria: level 3 (assessment scale 1–5)
A student understands requirements of geometry and vectors in plain and is able to apply them in some extent in engineering problems. At least 57% of maximum scores.
Assessment criteria: level 5 (assessment scale 1–5)
A student masters geometry and vectors in plain and is able to analyze engineering problems. At least 83 % of maximum scores.
Enrollment
16.03.2023 - 30.04.2024
Timing
01.06.2023 - 31.07.2024
Number of ECTS credits allocated
3 op
Virtual portion
3 op
Mode of delivery
Distance learning
Unit
Faculty of Technology (LAB)
Campus
E-campus
Teaching languages
- Finnish
Seats
1 - 500
Degree programmes
- Complementary competence, Bachelor's (in Finnish)
Teachers
- Päivi Porras
Groups
-
TLABTO22H
-
LABKES23KH
Learning outcomes
Student is able to
- calculate and simulate mathematical expressions
- solve geometric and trigonometric problems
- knows bacis of vectors in plane
Implementation and methods of teaching
Self-paced online course.
Automatically checked assignments award points to complete the course. Assignments alone can pass the course, but higher grades require participation in an applied exam.
Learning material and recommended literature
All material is available in moodle.
Learning environment
The course is studied with material in moodle.
Contents
- Percentages, polynomial equations (1. and 2. degree), systems of two linear equations: word problems
- Basics of trigonometry (right-angled triangle, non-right angled triangle, unit circle)
- Geometry in plain
- Vectors in plain
Review on topics of Johdatus matematiikkaan (Introduction to mathematics), if needed.
Additional information for students: previous knowledge etc.
Johdatus matematiikkaan (Introduction to mathematics) or corresponding knowledge from expressions, unit transformation, equations, and system of two equations.
Assessment criteria
Exercises and an applied test.
Assessment scale
1-5
Failed (0)
A student cannot solve mechanical exercises well enough. Less than 33% of maximum scores.
Assessment criteria: level 1 (assessment scale 1–5)
A student knows methods for geometry in plain and for vectors in plain and can solve simple mechanical exercises.
Assessment criteria: level 3 (assessment scale 1–5)
A student understands requirements of geometry and vectors in plain and is able to apply them in some extent in engineering problems. At least 57% of maximum scores.
Assessment criteria: level 5 (assessment scale 1–5)
A student masters geometry and vectors in plain and is able to analyze engineering problems. At least 83 % of maximum scores.
Enrollment
21.11.2022 - 15.01.2023
Timing
09.01.2023 - 30.05.2023
Number of ECTS credits allocated
3 op
Virtual portion
3 op
Mode of delivery
Distance learning
Unit
Faculty of Technology (LAB)
Campus
E-campus
Teaching languages
- Finnish
Seats
10 - 120
Degree programmes
- Bachelor's Degree Programme in Mechanical Engineering (in Finnish)
- Bachelor’s Degree Programme in Environmental Engineering (in Finnish)
- Bachelor’s Degree Programme in Wood Technology (in Finnish)
Teachers
- Heidi Rutila
- Erjaleena Koljonen
Scheduling groups
- Luennot A-ryhmä (Size: 0. Open UAS: 0.)
- Luennot B-ryhmä (Size: 0. Open UAS: 0.)
Groups
-
TLTIENTEC23KM
-
TLTIKONE23KV
-
TLTIPUU23KV
Small groups
- Luennot 1
- Luennot 2
Learning outcomes
Student is able to
- calculate and simulate mathematical expressions
- solve geometric and trigonometric problems
- knows bacis of vectors in plane
Assessment scale
1-5
Enrollment
21.11.2022 - 15.01.2023
Timing
09.01.2023 - 31.05.2023
Number of ECTS credits allocated
3 op
Virtual portion
3 op
Mode of delivery
Distance learning
Unit
Faculty of Technology (LAB)
Campus
E-campus, Lappeenranta
Teaching languages
- Finnish
Seats
5 - 100
Degree programmes
- Bachelor’s Degree Programme in Electrical and Automation Engineering (in Finnish)
Teachers
- Tiina Valkonen
Scheduling groups
- Verkkoluento (joma) (Size: 0. Open UAS: 0.)
- Verkkoluento (perusteet) (Size: 0. Open UAS: 0.)
Groups
-
TLPRSAT23KM
Small groups
- Verkkoluento (joma)
- Online lecture (basic)
Learning outcomes
Student is able to
- calculate and simulate mathematical expressions
- solve geometric and trigonometric problems
- knows bacis of vectors in plane
Assessment scale
1-5
Enrollment
21.11.2022 - 15.01.2023
Timing
01.01.2023 - 31.07.2023
Number of ECTS credits allocated
3 op
Virtual portion
3 op
Mode of delivery
Distance learning
Unit
Faculty of Technology (LAB)
Campus
Lahti Campus
Teaching languages
- Finnish
Degree programmes
- Bachelor's Degree Programme in Information Technology (in Finnish)
Teachers
- Tommi Veijalainen
Scheduling groups
- Luennot 1 (Size: 500. Open UAS: 0.)
Groups
-
TLTITVT23KM
Small groups
- Luennot 1
Learning outcomes
Student is able to
- calculate and simulate mathematical expressions
- solve geometric and trigonometric problems
- knows bacis of vectors in plane
Assessment scale
1-5
Enrollment
01.07.2022 - 04.09.2022
Timing
12.09.2022 - 16.12.2022
Number of ECTS credits allocated
3 op
Mode of delivery
Contact teaching
Unit
Faculty of Technology (LAB)
Campus
Lappeenranta Campus
Teaching languages
- Finnish
Degree programmes
- Bachelor's Degree Programme in Mechanical Engineering (in Finnish)
Teachers
- Päivi Porras
- Petteri Karkkulainen
Scheduling groups
- R1 (Size: 0. Open UAS: 0.)
- R2 (Size: 0. Open UAS: 0.)
Groups
-
TLPRINFRA22S
-
TLPRTRT22S
-
TLPRKONE22S
Small groups
- R1
- R2
Learning outcomes
Student is able to
- calculate and simulate mathematical expressions
- solve geometric and trigonometric problems
- knows bacis of vectors in plane
Learning material and recommended literature
All material is available in moodle.
Learning environment
The course is studied with material in moodle.
Contents
- Percentages, polynomial equations (1. and 2. degree), systems of two linear equations: word problems
- Basics of trigonometry (right-angled triangle, non-right angled triangle, unit circle)
- Geometry in plain
- Vectors in plain
Review on topics of Johdatus matematiikkaan (Introduction to mathematics), if needed.
Additional information for students: previous knowledge etc.
Johdatus matematiikkaan (Introduction to mathematics) or corresponding knowledge from expressions, unit transformation, equations, and system of two equations.
Assessment criteria
Exercises and an applied test.
Assessment scale
1-5
Failed (0)
A student cannot solve mechanical exercises well enough. Less than 33% of maximum scores.
Assessment criteria: level 1 (assessment scale 1–5)
A student knows methods for geometry in plain and for vectors in plain and can solve simple mechanical exercises.
Assessment criteria: level 3 (assessment scale 1–5)
A student understands requirements of geometry and vectors in plain and is able to apply them in some extent in engineering problems. At least 57% of maximum scores.
Assessment criteria: level 5 (assessment scale 1–5)
A student masters geometry and vectors in plain and is able to analyze engineering problems. At least 83 % of maximum scores.
Enrollment
15.08.2022 - 04.09.2022
Timing
05.09.2022 - 16.12.2022
Number of ECTS credits allocated
3 op
Virtual portion
3 op
Mode of delivery
Distance learning
Unit
Faculty of Technology (LAB)
Campus
E-campus
Teaching languages
- Finnish
Degree programmes
- Bachelor's Degree Programme in Mechanical Engineering (in Finnish)
- Bachelor's Degree Programme in Civil and Construction Engineering, Construction Engineering (in Finnish), (2021, 2022, 2023)
- Bachelor's Degree Programme in Civil and Construction Engineering, Urban Planning (in Finnish), (2022, 2023)
- Bachelor's Degree Programme in Civil and Construction Engineering, Infrastructure Engineering (in Finnish), (2022, 2023)
- Bachelor’s Degree Programme in Wood Technology (in Finnish)
Teachers
- Päivi Porras
Scheduling groups
- Verkko (Size: 0. Open UAS: 0.)
Groups
-
TLPRINFRA22S
-
TLTIYKS22S
-
TLPRTRT22S
-
TLPRKONE22S
-
TLTIPUU22S
-
TLTIKONE22S
Small groups
- R3 + online
Learning outcomes
Student is able to
- calculate and simulate mathematical expressions
- solve geometric and trigonometric problems
- knows bacis of vectors in plane
Implementation and methods of teaching
This is an online version of Tekniikan matematiikan perusteet. The course can studied at own pace, although there are scheduled lectures. The number of lectures is less than in contact teaching.
The course can be studied during the autumn but lectures are before autumn break on Thursday at 10am - 12am. There are extra lectures on first three weeks, whose lecturing times are not available yet.
Learning material and recommended literature
All material is available in moodle.
Learning environment
The course is studied with material in moodle.
Contents
- Percentages, polynomial equations (1. and 2. degree), systems of two linear equations: word problems
- Basics of trigonometry (right-angled triangle, non-right angled triangle, unit circle)
- Geometry in plain
- Vectors in plain
Review on topics of Johdatus matematiikkaan (Introduction to mathematics), if needed.
Additional information for students: previous knowledge etc.
Johdatus matematiikkaan (Introduction to mathematics) or corresponding knowledge from expressions, unit transformation, equations, and system of two equations.
Assessment criteria
Exercises and an applied test.
Assessment scale
1-5
Failed (0)
A student cannot solve mechanical exercises well enough. Less than 33% of maximum scores.
Assessment criteria: level 1 (assessment scale 1–5)
A student knows methods for geometry in plain and for vectors in plain and can solve simple mechanical exercises.
Assessment criteria: level 3 (assessment scale 1–5)
A student understands requirements of geometry and vectors in plain and is able to apply them in some extent in engineering problems. At least 57% of maximum scores.
Assessment criteria: level 5 (assessment scale 1–5)
A student masters geometry and vectors in plain and is able to analyze engineering problems. At least 83 % of maximum scores.
Enrollment
01.07.2022 - 04.09.2022
Timing
29.08.2022 - 16.12.2022
Number of ECTS credits allocated
3 op
Mode of delivery
Contact teaching
Unit
Faculty of Technology (LAB)
Campus
E-campus, Lahti
Teaching languages
- Finnish
Degree programmes
- Bachelor's Degree Programme in Information Technology (in Finnish)
Teachers
- Tommi Veijalainen
- Juha Hyytiäinen
Scheduling groups
- Luennot 1 (Size: 200. Open UAS: 0.)
Groups
-
TLTITVT22SV
Small groups
- Luennot 1
Learning outcomes
Student is able to
- calculate and simulate mathematical expressions
- solve geometric and trigonometric problems
- knows bacis of vectors in plane
Assessment scale
1-5
Enrollment
01.07.2022 - 04.09.2022
Timing
29.08.2022 - 16.12.2022
Number of ECTS credits allocated
3 op
Virtual portion
1 op
Mode of delivery
67 % Contact teaching, 33 % Distance learning
Unit
Faculty of Technology (LAB)
Campus
Lahti Campus
Teaching languages
- Finnish
Seats
0 - 100
Degree programmes
- Bachelor's Degree Programme in Mechanical Engineering (in Finnish)
- Bachelor’s Degree Programme in Wood Technology (in Finnish)
Teachers
- Heidi Rutila
- Erjaleena Koljonen
Scheduling groups
- A-ryhmä (Size: 0. Open UAS: 0.)
- B-ryhmä (Size: 0. Open UAS: 0.)
Groups
-
TLTIYKS22S
-
TLTIPUU22S
-
TLTIKONE22S
Small groups
- Luennot 1
- Luennot 2
Learning outcomes
Student is able to
- calculate and simulate mathematical expressions
- solve geometric and trigonometric problems
- knows bacis of vectors in plane
Assessment scale
1-5
Enrollment
14.03.2022 - 19.04.2022
Timing
01.05.2022 - 31.08.2022
Number of ECTS credits allocated
3 op
Virtual portion
3 op
Mode of delivery
Distance learning
Unit
Faculty of Technology (LAB)
Campus
E-campus
Teaching languages
- Finnish
Seats
0 - 50
Degree programmes
- Summer studies (in Finnish)
Teachers
- Heidi Rutila
- Erjaleena Koljonen
Groups
-
LABLPRKES22KH
-
LABLTIKES22KH
Learning outcomes
Student is able to
- calculate and simulate mathematical expressions
- solve geometric and trigonometric problems
- knows bacis of vectors in plane
Assessment scale
1-5
Enrollment
19.11.2021 - 14.01.2022
Timing
01.01.2022 - 31.07.2022
Number of ECTS credits allocated
3 op
Virtual portion
3 op
Mode of delivery
Distance learning
Unit
Faculty of Technology (LAB)
Campus
Lahti Campus
Teaching languages
- Finnish
Seats
5 - 100
Degree programmes
- Bachelor's Degree Programme in Mechanical Engineering (in Finnish)
Teachers
- Heidi Rutila
- Erjaleena Koljonen
Scheduling groups
- A-ryhmä (Size: 0. Open UAS: 0.)
- B-ryhmä (Size: 0. Open UAS: 0.)
Groups
-
TLTIKONE22KM
-
TLTIPUU22KM
-
TLTIENTEC22KM
Small groups
- luennot 1
- luennot 1
Learning outcomes
Student is able to
- calculate and simulate mathematical expressions
- solve geometric and trigonometric problems
- knows bacis of vectors in plane
Assessment scale
1-5
Enrollment
19.11.2021 - 09.01.2022
Timing
01.01.2022 - 31.05.2022
Number of ECTS credits allocated
3 op
Virtual portion
1 op
Mode of delivery
67 % Contact teaching, 33 % Distance learning
Unit
Faculty of Technology (LAB)
Campus
Lahti Campus
Teaching languages
- Finnish
Seats
5 - 50
Degree programmes
- Bachelor’s Degree Programme in Wood Technology (in Finnish)
Teachers
- Erjaleena Koljonen
Scheduling groups
- Luennot 1 (Size: 0. Open UAS: 0.)
Groups
-
TLTIPUU21S
Small groups
- Luennot 1
Learning outcomes
Student is able to
- calculate and simulate mathematical expressions
- solve geometric and trigonometric problems
- knows bacis of vectors in plane
Assessment scale
1-5
Enrollment
19.11.2021 - 09.01.2022
Timing
01.01.2022 - 01.05.2022
Number of ECTS credits allocated
3 op
Mode of delivery
Contact teaching
Unit
Faculty of Technology (LAB)
Campus
Lahti Campus
Teaching languages
- Finnish
Degree programmes
- Bachelor's Degree Programme in Information Technology (in Finnish)
Teachers
- Tommi Veijalainen
- Juha Hyytiäinen
Scheduling groups
- Info 1 (Size: 0. Open UAS: 0.)
Groups
-
TLTITVT22K
Small groups
- Info 1
Learning outcomes
Student is able to
- calculate and simulate mathematical expressions
- solve geometric and trigonometric problems
- knows bacis of vectors in plane
Assessment scale
1-5