Thesis PublicationLaajuus (5 cr)
Code: AO00BU55
Credits
5 op
Objective
The student is able to:
- present the results or output of their thesis
- report on their thesis in writing in accordance with the thesis guidelines of LAB University of Applied Sciences
- write a maturity test.
Enrollment
06.05.2024 - 30.08.2024
Timing
01.08.2024 - 31.12.2024
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Unit
Institute of Design and Fine Arts (LAB)
Campus
Lahti Campus
Teaching languages
- Finnish
Degree programmes
- Bachelor’s Degree Programme in Interior Architecture and Furniture Design (in Finnish)
Teachers
- Harri Kalliomäki
- Timo Sulkamo
Scheduling groups
- Luennot (Size: 0. Open UAS: 0.)
Groups
-
MLTISIK21K
Small groups
- Lecture 1
Learning outcomes
The student is able to:
- present the results or output of their thesis
- report on their thesis in writing in accordance with the thesis guidelines of LAB University of Applied Sciences
- write a maturity test.
Implementation and methods of teaching
• Finishing the job. Summary and evaluation seminars. Participation in an exhibition.
Learning material and recommended literature
• Lab thesis manual.
Alternative completion methods
• In exceptional cases, this will be agreed with the supervising teachers.
Working life cooperation
• Individual theses may be carried out in cooperation with working life partners. The construction of an exhibition may also involve cooperation with the working world.
Learning environment
• Campus, showrooms.
Student time use and work load
• The thesis design component is 5 credits, equivalent to approximately 135 hours of student work (one credit 27 hours).
Contents
• At this stage of the course, the thesis has progressed to the finalisation and publication stage.
In the synthesis seminar, permission will be given to participate in the public evaluation.
The written part will be finalised, used in Turnitin and submitted to the assessors. The artwork will be finalised for the exhibition and, in the case of a dummy for a photo book, for example, will be submitted to the evaluators. The judges will have access to the exhibition work in advance in the form of a pdf of the photo booklet that will be sent to them.
Each student will be involved in the construction of the exhibition, its publicity, etc.
One or more external assessors will be invited to the assessment session. The teachers who supervised the work in the seminars will also take part in the evaluation. The communication teachers will give a written opinion on the written part of the work.'
The student uploads the completed, assessed and approved work to Theseus.
Students will take the maturity test as informed by the supervising teacher.
Additional information for students: previous knowledge etc.
• Design and implementation of the thesis.
Assessment criteria
• The evaluation of the completed thesis is based on the evaluation table in the Lab thesis guidelines.
Assessment scale
1-5
Failed (0)
• The evaluation of the completed thesis is based on the evaluation table in the Lab thesis guidelines.
Assessment criteria: level 1 (assessment scale 1–5)
• The evaluation of the completed thesis is based on the evaluation table in the Lab thesis guidelines.
Assessment criteria: level 3 (assessment scale 1–5)
• The evaluation of the completed thesis is based on the evaluation table in the Lab thesis guidelines.
Assessment criteria: level 5 (assessment scale 1–5)
• The evaluation of the completed thesis is based on the evaluation table in the Lab thesis guidelines.
Enrollment
06.05.2024 - 30.08.2024
Timing
01.08.2024 - 31.12.2024
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Unit
Institute of Design and Fine Arts (LAB)
Campus
Lahti Campus
Teaching languages
- Finnish
Degree programmes
- Bachelor's Degree Programme in Service Design (in Finnish), (2021, 2022, 2023)
Teachers
- Sara Ikävalko
- Auli Haarnio
Teacher in charge
Tero Leponiemi
Scheduling groups
- Seminaari (Size: 0. Open UAS: 0.)
Groups
-
MLTIPAL21K
Small groups
- Seminar 1
Learning outcomes
The student is able to:
- present the results or output of their thesis
- report on their thesis in writing in accordance with the thesis guidelines of LAB University of Applied Sciences
- write a maturity test.
Implementation and methods of teaching
• Finishing the job. Summary and evaluation seminars. Participation in an exhibition.
Learning material and recommended literature
• Lab thesis manual.
Alternative completion methods
• In exceptional cases, this will be agreed with the supervising teachers.
Working life cooperation
• Individual theses may be carried out in cooperation with working life partners. The construction of an exhibition may also involve cooperation with the working world.
Learning environment
• Campus, showrooms.
Student time use and work load
• The thesis design component is 5 credits, equivalent to approximately 135 hours of student work (one credit 27 hours).
Contents
• At this stage of the course, the thesis has progressed to the finalisation and publication stage.
In the synthesis seminar, permission will be given to participate in the public evaluation.
The written part will be finalised, used in Turnitin and submitted to the assessors. The artwork will be finalised for the exhibition and, in the case of a dummy for a photo book, for example, will be submitted to the evaluators. The judges will have access to the exhibition work in advance in the form of a pdf of the photo booklet that will be sent to them.
Each student will be involved in the construction of the exhibition, its publicity, etc.
One or more external assessors will be invited to the assessment session. The teachers who supervised the work in the seminars will also take part in the evaluation. The communication teachers will give a written opinion on the written part of the work.'
The student uploads the completed, assessed and approved work to Theseus.
Students will take the maturity test as informed by the supervising teacher.
Additional information for students: previous knowledge etc.
• Design and implementation of the thesis.
Assessment criteria
• The evaluation of the completed thesis is based on the evaluation table in the Lab thesis guidelines.
Assessment scale
1-5
Failed (0)
• The evaluation of the completed thesis is based on the evaluation table in the Lab thesis guidelines.
Assessment criteria: level 1 (assessment scale 1–5)
• The evaluation of the completed thesis is based on the evaluation table in the Lab thesis guidelines.
Assessment criteria: level 3 (assessment scale 1–5)
• The evaluation of the completed thesis is based on the evaluation table in the Lab thesis guidelines.
Assessment criteria: level 5 (assessment scale 1–5)
• The evaluation of the completed thesis is based on the evaluation table in the Lab thesis guidelines.
Enrollment
20.11.2023 - 05.01.2024
Timing
29.04.2024 - 12.05.2024
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Unit
Institute of Design and Fine Arts (LAB)
Campus
Lahti Campus
Teaching languages
- Finnish
Degree programmes
- Bachelor’s Degree Programme in Graphic Design (in Finnish), (2020, 2021, 2022)
Teachers
- Marion Robinson
- Christoffer Leka
- Sara Bengts
- Petri Suni
Scheduling groups
- GR Julkaisuseminaarit (Size: 0. Open UAS: 0.)
Groups
-
MLTIGR20S
Small groups
- Lecture 1
Learning outcomes
The student is able to:
- present the results or output of their thesis
- report on their thesis in writing in accordance with the thesis guidelines of LAB University of Applied Sciences
- write a maturity test.
Implementation and methods of teaching
Finishing the job. Summary and evaluation seminars. Participation in an exhibition.
Alternative completion methods
In exceptional cases, this will be agreed with the supervising teachers.
Working life cooperation
• Individual theses may be carried out in cooperation with working life partners. The construction of an exhibition may also involve cooperation with the working world.
Learning environment
• Campus, showrooms.
Student time use and work load
• The thesis design component is 5 credits, equivalent to approximately 135 hours of student work (one credit 27 hours).
Contents
• At this stage of the course, the thesis has progressed to the finalisation and publication stage.
In the synthesis seminar, permission will be given to participate in the public evaluation.
The written part will be finalised, used in Turnitin and submitted to the assessors. The artwork will be finalised for the exhibition and, in the case of a dummy for a photo book, for example, will be submitted to the evaluators. The judges will have access to the exhibition work in advance in the form of a pdf of the photo booklet that will be sent to them.
Each student will be involved in the construction of the exhibition, its publicity, etc.
One or more external assessors will be invited to the assessment session. The teachers who supervised the work in the seminars will also take part in the evaluation. The communication teachers will give a written opinion on the written part of the work.'
The student uploads the completed, assessed and approved work to Theseus.
Students will take the maturity test as informed by the supervising teacher.
Additional information for students: previous knowledge etc.
• Design and implementation of the thesis.
Assessment criteria
• The evaluation of the completed thesis is based on the evaluation table in the Lab thesis guidelines.
Assessment scale
1-5
Enrollment
20.11.2023 - 05.01.2024
Timing
08.04.2024 - 07.05.2024
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Unit
Institute of Design and Fine Arts (LAB)
Campus
Lahti Campus
Teaching languages
- Finnish
Degree programmes
- Bachelor’s Degree Programme in Photography (in Finnish)
Teachers
- Henrik Edlund
- Pauliina Pasanen
Scheduling groups
- Luennot (Size: 0. Open UAS: 0.)
Groups
-
MLTIVK20S
Small groups
- Luennot 1
Learning outcomes
The student is able to:
- present the results or output of their thesis
- report on their thesis in writing in accordance with the thesis guidelines of LAB University of Applied Sciences
- write a maturity test.
Implementation and methods of teaching
Finishing the job. Summary and evaluation seminars. Participation in an exhibition.
Timing and attendance
The seminars are compulsory.
Learning material and recommended literature
Lab thesis manual.
Alternative completion methods
In exceptional cases, this will be agreed with the supervising teachers.
Working life cooperation
Individual theses may be carried out in cooperation with working life partners. The construction of an exhibition may also involve cooperation with the working world.
Learning environment
Campus, showrooms.
Student time use and work load
The thesis design component is 5 credits, equivalent to approximately 135 hours of student work (one credit 27 hours).
Contents
At this stage of the course, the thesis has progressed to the finalisation and publication stage.
In the synthesis seminar, permission will be given to participate in the public evaluation.
The written part will be finalised, used in Turnitin and submitted to the assessors. The artwork will be finalised for the exhibition and, in the case of a dummy for a photo book, for example, will be submitted to the evaluators. The judges will have access to the exhibition work in advance in the form of a pdf of the photo booklet that will be sent to them.
Each student will be involved in the construction of the exhibition, its publicity, etc.
One or more external assessors will be invited to the assessment session. The teachers who supervised the work in the seminars will also take part in the evaluation. The communication teachers will give a written opinion on the written part of the work.'
The student uploads the completed, assessed and approved work to Theseus.
Students will take the maturity test as informed by the supervising teacher.
Additional information for students: previous knowledge etc.
Design and implementation of the thesis.
Assessment criteria
The evaluation of the completed thesis is based on the evaluation table in the Lab thesis guidelines.
Assessment scale
1-5
Enrollment
15.05.2023 - 01.09.2023
Timing
01.01.2024 - 31.05.2024
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Unit
Institute of Design and Fine Arts (LAB)
Campus
Lappeenranta Campus
Teaching languages
- Finnish
Degree programmes
- Bachelor's Degree Programme in Visual Arts (in Finnish)
Teachers
- Jenni Sokura
- MI_opettaja_KUVA, Kuvataide Virtuaaliopettaja (LAB)
- Timo Partanen
Groups
-
MLPRKUVA20S
Learning outcomes
The student is able to:
- present the results or output of their thesis
- report on their thesis in writing in accordance with the thesis guidelines of LAB University of Applied Sciences
- write a maturity test.
Implementation and methods of teaching
• Finishing the job. Summary and evaluation seminars. Participation in an exhibition.
Learning material and recommended literature
• Lab thesis manual.
Alternative completion methods
• In exceptional cases, this will be agreed with the supervising teachers.
Working life cooperation
• Individual theses may be carried out in cooperation with working life partners. The construction of an exhibition may also involve cooperation with the working world.
Learning environment
• Campus, showrooms.
Student time use and work load
• The thesis design component is 5 credits, equivalent to approximately 135 hours of student work (one credit 27 hours).
Contents
• At this stage of the course, the thesis has progressed to the finalisation and publication stage.
In the synthesis seminar, permission will be given to participate in the public evaluation.
The written part will be finalised, used in Turnitin and submitted to the assessors. The artwork will be finalised for the exhibition and, in the case of a dummy for a photo book, for example, will be submitted to the evaluators. The judges will have access to the exhibition work in advance in the form of a pdf of the photo booklet that will be sent to them.
Each student will be involved in the construction of the exhibition, its publicity, etc.
One or more external assessors will be invited to the assessment session. The teachers who supervised the work in the seminars will also take part in the evaluation. The communication teachers will give a written opinion on the written part of the work.'
The student uploads the completed, assessed and approved work to Theseus.
Students will take the maturity test as informed by the supervising teacher.
Additional information for students: previous knowledge etc.
• Design and implementation of the thesis.
Assessment criteria
• The evaluation of the completed thesis is based on the evaluation table in the Lab thesis guidelines.
Assessment scale
1-5
Failed (0)
• The evaluation of the completed thesis is based on the evaluation table in the Lab thesis guidelines.
Assessment criteria: level 1 (assessment scale 1–5)
• The evaluation of the completed thesis is based on the evaluation table in the Lab thesis guidelines.
Assessment criteria: level 3 (assessment scale 1–5)
• The evaluation of the completed thesis is based on the evaluation table in the Lab thesis guidelines.
Assessment criteria: level 5 (assessment scale 1–5)
• The evaluation of the completed thesis is based on the evaluation table in the Lab thesis guidelines.
Enrollment
20.11.2023 - 05.01.2024
Timing
01.01.2024 - 31.05.2024
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Unit
Institute of Design and Fine Arts (LAB)
Campus
Lahti Campus
Teaching languages
- Finnish
Degree programmes
- Bachelor’s Degree Programme in Wearable Design (in Finnish)
Teachers
- Tuuli Ruokolainen-Pursiainen
- Susanna Björklund
- Minna Cheung
Scheduling groups
- Harjoitukset 1 (Size: 0. Open UAS: 0.)
Groups
-
MLTIPUMU20S
Small groups
- Practice 1
Learning outcomes
The student is able to:
- present the results or output of their thesis
- report on their thesis in writing in accordance with the thesis guidelines of LAB University of Applied Sciences
- write a maturity test.
Implementation and methods of teaching
• Finishing the job. Summary and evaluation seminars. Participation in an exhibition.
Learning material and recommended literature
• Lab thesis manual.
Alternative completion methods
• In exceptional cases, this will be agreed with the supervising teachers.
Working life cooperation
• Individual theses may be carried out in cooperation with working life partners. The construction of an exhibition may also involve cooperation with the working world.
Learning environment
• Campus, showrooms.
Student time use and work load
• The thesis design component is 5 credits, equivalent to approximately 135 hours of student work (one credit 27 hours).
Contents
• At this stage of the course, the thesis has progressed to the finalisation and publication stage.
In the synthesis seminar, permission will be given to participate in the public evaluation.
The written part will be finalised, used in Turnitin and submitted to the assessors. The artwork will be finalised for the exhibition and, in the case of a dummy for a photo book, for example, will be submitted to the evaluators. The judges will have access to the exhibition work in advance in the form of a pdf of the photo booklet that will be sent to them.
Each student will be involved in the construction of the exhibition, its publicity, etc.
One or more external assessors will be invited to the assessment session. The teachers who supervised the work in the seminars will also take part in the evaluation. The communication teachers will give a written opinion on the written part of the work.'
The student uploads the completed, assessed and approved work to Theseus.
Students will take the maturity test as informed by the supervising teacher.
Additional information for students: previous knowledge etc.
• Design and implementation of the thesis.
Assessment criteria
• The evaluation of the completed thesis is based on the evaluation table in the Lab thesis guidelines.
Assessment scale
1-5
Failed (0)
• The evaluation of the completed thesis is based on the evaluation table in the Lab thesis guidelines.
Assessment criteria: level 1 (assessment scale 1–5)
• The evaluation of the completed thesis is based on the evaluation table in the Lab thesis guidelines.
Assessment criteria: level 3 (assessment scale 1–5)
• The evaluation of the completed thesis is based on the evaluation table in the Lab thesis guidelines.
Assessment criteria: level 5 (assessment scale 1–5)
• The evaluation of the completed thesis is based on the evaluation table in the Lab thesis guidelines.
Enrollment
20.11.2023 - 05.01.2024
Timing
01.01.2024 - 31.07.2024
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Unit
Institute of Design and Fine Arts (LAB)
Campus
Lahti Campus
Teaching languages
- Finnish
Degree programmes
- Experience and Service Design (in Finnish), (2018, 2019, 2020)
Teachers
- Sara Ikävalko
- Katariina Pakarinen
- Ari Hautaniemi
- Auli Haarnio
Scheduling groups
- Saran ja Arin tunnit (Size: 0. Open UAS: 0.)
- Aulin ja Katariinan tunnit (Size: 0. Open UAS: 0.)
Groups
-
MLTIKOP20S
Small groups
- Lecture 1
- Lecture 2
Learning outcomes
The student is able to:
- present the results or output of their thesis
- report on their thesis in writing in accordance with the thesis guidelines of LAB University of Applied Sciences
- write a maturity test.
Implementation and methods of teaching
• Finishing the job. Summary and evaluation seminars. Participation in an exhibition.
Learning material and recommended literature
• Lab thesis manual.
Alternative completion methods
• In exceptional cases, this will be agreed with the supervising teachers.
Working life cooperation
• Individual theses may be carried out in cooperation with working life partners. The construction of an exhibition may also involve cooperation with the working world.
Learning environment
• Campus, showrooms.
Student time use and work load
• The thesis design component is 5 credits, equivalent to approximately 135 hours of student work (one credit 27 hours).
Contents
• At this stage of the course, the thesis has progressed to the finalisation and publication stage.
In the synthesis seminar, permission will be given to participate in the public evaluation.
The written part will be finalised, used in Turnitin and submitted to the assessors. The artwork will be finalised for the exhibition and, in the case of a dummy for a photo book, for example, will be submitted to the evaluators. The judges will have access to the exhibition work in advance in the form of a pdf of the photo booklet that will be sent to them.
Each student will be involved in the construction of the exhibition, its publicity, etc.
One or more external assessors will be invited to the assessment session. The teachers who supervised the work in the seminars will also take part in the evaluation. The communication teachers will give a written opinion on the written part of the work.'
The student uploads the completed, assessed and approved work to Theseus.
Students will take the maturity test as informed by the supervising teacher.
Additional information for students: previous knowledge etc.
• Design and implementation of the thesis.
Assessment criteria
• The evaluation of the completed thesis is based on the evaluation table in the Lab thesis guidelines.
Assessment scale
1-5
Failed (0)
• The evaluation of the completed thesis is based on the evaluation table in the Lab thesis guidelines.
Assessment criteria: level 1 (assessment scale 1–5)
• The evaluation of the completed thesis is based on the evaluation table in the Lab thesis guidelines.
Assessment criteria: level 3 (assessment scale 1–5)
• The evaluation of the completed thesis is based on the evaluation table in the Lab thesis guidelines.
Assessment criteria: level 5 (assessment scale 1–5)
• The evaluation of the completed thesis is based on the evaluation table in the Lab thesis guidelines.
Enrollment
20.11.2023 - 05.01.2024
Timing
01.01.2024 - 31.07.2024
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Unit
Institute of Design and Fine Arts (LAB)
Campus
Lahti Campus
Teaching languages
- Finnish
Degree programmes
- Bachelor’s Degree Programme in Media Content Design
Teachers
- Antti Heinonen
- Maaria Niskala
Groups
-
MLTIMES20S
Learning outcomes
The student is able to:
- present the results or output of their thesis
- report on their thesis in writing in accordance with the thesis guidelines of LAB University of Applied Sciences
- write a maturity test.
Implementation and methods of teaching
• Finishing the job. Summary and evaluation seminars. Participation in an exhibition.
Learning material and recommended literature
• Lab thesis manual.
Alternative completion methods
• In exceptional cases, this will be agreed with the supervising teachers.
Working life cooperation
• Individual theses may be carried out in cooperation with working life partners. The construction of an exhibition may also involve cooperation with the working world.
Learning environment
• Campus, showrooms.
Student time use and work load
• The thesis design component is 5 credits, equivalent to approximately 135 hours of student work (one credit 27 hours).
Contents
• At this stage of the course, the thesis has progressed to the finalisation and publication stage.
In the synthesis seminar, permission will be given to participate in the public evaluation.
The written part will be finalised, used in Turnitin and submitted to the assessors. The artwork will be finalised for the exhibition and, in the case of a dummy for a photo book, for example, will be submitted to the evaluators. The judges will have access to the exhibition work in advance in the form of a pdf of the photo booklet that will be sent to them.
Each student will be involved in the construction of the exhibition, its publicity, etc.
One or more external assessors will be invited to the assessment session. The teachers who supervised the work in the seminars will also take part in the evaluation. The communication teachers will give a written opinion on the written part of the work.'
The student uploads the completed, assessed and approved work to Theseus.
Students will take the maturity test as informed by the supervising teacher.
Additional information for students: previous knowledge etc.
• Design and implementation of the thesis.
Assessment criteria
• The evaluation of the completed thesis is based on the evaluation table in the Lab thesis guidelines.
Assessment scale
1-5
Failed (0)
• The evaluation of the completed thesis is based on the evaluation table in the Lab thesis guidelines.
Assessment criteria: level 1 (assessment scale 1–5)
• The evaluation of the completed thesis is based on the evaluation table in the Lab thesis guidelines.
Assessment criteria: level 3 (assessment scale 1–5)
• The evaluation of the completed thesis is based on the evaluation table in the Lab thesis guidelines.
Assessment criteria: level 5 (assessment scale 1–5)
• The evaluation of the completed thesis is based on the evaluation table in the Lab thesis guidelines.
Enrollment
20.11.2023 - 05.01.2024
Timing
01.01.2024 - 31.07.2024
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Unit
Institute of Design and Fine Arts (LAB)
Campus
Lahti Campus
Teaching languages
- Finnish
Degree programmes
- Bachelor’s Degree Programme in Packaging and Brand Design (in Finnish), (2020)
Teachers
- Oona Casalegno
- Noora Nylander
- Heikki Nuutinen
Scheduling groups
- Seminaari 1 (Size: 0. Open UAS: 0.)
Groups
-
MLTIPAMU20S
Small groups
- Seminar 1
Learning outcomes
The student is able to:
- present the results or output of their thesis
- report on their thesis in writing in accordance with the thesis guidelines of LAB University of Applied Sciences
- write a maturity test.
Implementation and methods of teaching
PUBLICATION SEMINARS: APRIL/MAY
Finalising the thesis result, finalising the report and finalising the presentation at the publication seminar and the maturity essay.
Return of the final written report to the supervisors
Publication seminar: 20 min / student + commentary 25 min
Timing and attendance
Attendance at the seminar is compulsory and must be arranged separately with the supervising teacher in the event of a disability. Individual tuition as required
Learning material and recommended literature
In the Moodle Platform for Thesis work
Working life cooperation
The thesis can be carried out in cooperation with working life or in RND - projects. The student acquires and negotiates the cooperation independently.
Assessment criteria
Pass/Fail. The final thesis is assessed according to the LAB University of Applied Sciences' thesis assessment framework:
https://elab.lab.fi/sites/default/files/category-page/2022-08/LAB_Thesis_evaluation_criteria_Bachelor_170822.pdf
Assessment scale
1-5
Enrollment
20.11.2023 - 05.01.2024
Timing
01.01.2024 - 31.07.2024
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Unit
Institute of Design and Fine Arts (LAB)
Campus
Lahti Campus
Teaching languages
- Finnish
Degree programmes
- Bachelor’s Degree Programme in Interior Architecture and Furniture Design (in Finnish)
Teachers
- Sari Anttonen
- Henri Halla-Aho
- Timo Sulkamo
Scheduling groups
- Luennot (Size: 0. Open UAS: 0.)
Groups
-
MLTISIK20S
Small groups
- Lecture 1
Learning outcomes
The student is able to:
- present the results or output of their thesis
- report on their thesis in writing in accordance with the thesis guidelines of LAB University of Applied Sciences
- write a maturity test.
Implementation and methods of teaching
• Finishing the job. Summary and evaluation seminars. Participation in an exhibition.
Learning material and recommended literature
• Lab thesis manual.
Alternative completion methods
• In exceptional cases, this will be agreed with the supervising teachers.
Working life cooperation
• Individual theses may be carried out in cooperation with working life partners. The construction of an exhibition may also involve cooperation with the working world.
Learning environment
• Campus, showrooms.
Student time use and work load
• The thesis design component is 5 credits, equivalent to approximately 135 hours of student work (one credit 27 hours).
Contents
• At this stage of the course, the thesis has progressed to the finalisation and publication stage.
In the synthesis seminar, permission will be given to participate in the public evaluation.
The written part will be finalised, used in Turnitin and submitted to the assessors. The artwork will be finalised for the exhibition and, in the case of a dummy for a photo book, for example, will be submitted to the evaluators. The judges will have access to the exhibition work in advance in the form of a pdf of the photo booklet that will be sent to them.
Each student will be involved in the construction of the exhibition, its publicity, etc.
One or more external assessors will be invited to the assessment session. The teachers who supervised the work in the seminars will also take part in the evaluation. The communication teachers will give a written opinion on the written part of the work.'
The student uploads the completed, assessed and approved work to Theseus.
Students will take the maturity test as informed by the supervising teacher.
Additional information for students: previous knowledge etc.
• Design and implementation of the thesis.
Assessment criteria
• The evaluation of the completed thesis is based on the evaluation table in the Lab thesis guidelines.
Assessment scale
1-5
Failed (0)
• The evaluation of the completed thesis is based on the evaluation table in the Lab thesis guidelines.
Assessment criteria: level 1 (assessment scale 1–5)
• The evaluation of the completed thesis is based on the evaluation table in the Lab thesis guidelines.
Assessment criteria: level 3 (assessment scale 1–5)
• The evaluation of the completed thesis is based on the evaluation table in the Lab thesis guidelines.
Assessment criteria: level 5 (assessment scale 1–5)
• The evaluation of the completed thesis is based on the evaluation table in the Lab thesis guidelines.
Enrollment
20.11.2023 - 05.01.2024
Timing
01.01.2024 - 31.05.2024
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Unit
Institute of Design and Fine Arts (LAB)
Campus
Lahti Campus
Teaching languages
- Finnish
Degree programmes
- Bachelor’s Degree Programme in Industrial Design (in Finnish), (2020, 2021, 2022, 2023)
Teachers
- Sami Hyyryläinen
- Petteri Venetjoki
Scheduling groups
- TEMU ja ID 2024 Julkaisuseminaarit (Size: 22. Open UAS: 0.)
- Opinäytetyön viimeistelyn, raportoinnin ja julkaisun ohjaus, Sami Hyyryläinen (Size: 11. Open UAS: 0.)
- Opinäytetyön viimeistelyn, raportoinnin ja julkaisun ohjaus, Petteri Venetjoki (Size: 11. Open UAS: 0.)
Groups
-
MLTITEMU20S
Small groups
- Seminar 1
- Mentoring the finalisation, reporting and publication of the study, Sami Hyyryläinen
- Mentoring the finalisation, reporting and publication of the study, Petteri Venetjoki
Learning outcomes
The student is able to:
- present the results or output of their thesis
- report on their thesis in writing in accordance with the thesis guidelines of LAB University of Applied Sciences
- write a maturity test.
Implementation and methods of teaching
• Finishing the job. Summary and evaluation seminars. Participation in an exhibition.
Learning material and recommended literature
• Lab thesis manual.
Alternative completion methods
• In exceptional cases, this will be agreed with the supervising teachers.
Working life cooperation
• Individual theses may be carried out in cooperation with working life partners. The construction of an exhibition may also involve cooperation with the working world.
Learning environment
• Campus, showrooms.
Student time use and work load
• The thesis design component is 5 credits, equivalent to approximately 135 hours of student work (one credit 27 hours).
Contents
• At this stage of the course, the thesis has progressed to the finalisation and publication stage.
In the synthesis seminar, permission will be given to participate in the public evaluation.
The written part will be finalised, used in Turnitin and submitted to the assessors. The artwork will be finalised for the exhibition and, in the case of a dummy for a photo book, for example, will be submitted to the evaluators. The judges will have access to the exhibition work in advance in the form of a pdf of the photo booklet that will be sent to them.
Each student will be involved in the construction of the exhibition, its publicity, etc.
One or more external assessors will be invited to the assessment session. The teachers who supervised the work in the seminars will also take part in the evaluation. The communication teachers will give a written opinion on the written part of the work.'
The student uploads the completed, assessed and approved work to Theseus.
Students will take the maturity test as informed by the supervising teacher.
Additional information for students: previous knowledge etc.
• Design and implementation of the thesis.
Assessment criteria
• The evaluation of the completed thesis is based on the evaluation table in the Lab thesis guidelines.
Assessment scale
1-5
Failed (0)
• The evaluation of the completed thesis is based on the evaluation table in the Lab thesis guidelines.
Assessment criteria: level 1 (assessment scale 1–5)
• The evaluation of the completed thesis is based on the evaluation table in the Lab thesis guidelines.
Assessment criteria: level 3 (assessment scale 1–5)
• The evaluation of the completed thesis is based on the evaluation table in the Lab thesis guidelines.
Assessment criteria: level 5 (assessment scale 1–5)
• The evaluation of the completed thesis is based on the evaluation table in the Lab thesis guidelines.
Enrollment
01.07.2022 - 04.09.2022
Timing
01.09.2022 - 10.05.2023
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Unit
Institute of Design and Fine Arts (LAB)
Campus
Lappeenranta Campus
Teaching languages
- Finnish
Seats
20 - 30
Degree programmes
- Bachelor's Degree Programme in Visual Arts (in Finnish)
Teachers
- Jenni Sokura
- Timo Partanen
Groups
-
KUVA19Bachelor’s Degree Programme in Fine Arts 19S, Lappeenranta
Learning outcomes
The student is able to:
- present the results or output of their thesis
- report on their thesis in writing in accordance with the thesis guidelines of LAB University of Applied Sciences
- write a maturity test.
Assessment scale
1-5
Enrollment
19.11.2021 - 28.02.2022
Timing
02.01.2022 - 31.07.2022
Number of ECTS credits allocated
5 op
Virtual portion
1 op
Mode of delivery
80 % Contact teaching, 20 % Distance learning
Unit
Institute of Design and Fine Arts (LAB)
Campus
Lappeenranta Campus
Teaching languages
- Finnish
Degree programmes
- Bachelor's Degree Programme in Visual Arts (in Finnish)
Teachers
- Lotta Pyykkönen
Teacher in charge
Lotta Pyykkönen
Scheduling groups
- Harjoitukset 1 (Size: 30. Open UAS: 0.)
Groups
-
KUVA18Bachelor’s Degree Programme in Fine Arts 18S, Lappeenranta
Small groups
- Harjoitukset 1
Learning outcomes
The student is able to:
- present the results or output of their thesis
- report on their thesis in writing in accordance with the thesis guidelines of LAB University of Applied Sciences
- write a maturity test.
Assessment scale
1-5