Machine Drawing and 3D DesignLaajuus (5 cr)
Code: AT00BZ07
Credits
5 op
Objective
The student is able to:
- basics of technical drawing
- Basics of CAD drawing
- read, edit and create technical 2D drawings
- Basics of 3D modeling
- create technical drawings in a 3D environment and visualize 3D assemblies
Enrollment
20.11.2024 - 03.01.2025
Timing
07.01.2025 - 30.04.2025
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Unit
Faculty of Technology (LAB)
Campus
Lahti Campus
Teaching languages
- Finnish
Degree programmes
- Bachelor’s Degree Programme in Wood Technology (in Finnish)
Teachers
- Kusti Alasalmi
Scheduling groups
- Harjoitukset 1 (Size: 0. Open UAS: 0.)
Groups
-
TLTIPUU24S
Small groups
- Practice 1
Learning outcomes
The student is able to:
- basics of technical drawing
- Basics of CAD drawing
- read, edit and create technical 2D drawings
- Basics of 3D modeling
- create technical drawings in a 3D environment and visualize 3D assemblies
Implementation and methods of teaching
Student
- Understand various technical drawings
- is able to draw working and assembly drawings in accordance with the standards of the technical drawing
- know the basics of CAD drawing and modeling (SolidWorks and / or AutoCad)
- is able to draw technical drawings and edit them with CAD software
- can visualize 3D models and assemblies
Timing and attendance
Information and guidance during class and laboratory classes. Training and assignments on your own computer.
Learning material and recommended literature
Technical drawing ISO standards
Software support materials, teacher-produced material, and network-produced learning materials.
Alternative completion methods
RPL, recognition of prior learning.
Learning environment
IT- classroom, My computer, Moodle environment.
Student time use and work load
5 * 27 hours = 137 hours of student work including 50 hours of information and guidance.
Contents
Understanding of various technical drawings.
- Working and assembly drawings in accordance with standards.
- Basics of CAD drawing and modeling (SolidWorks and / or AutoCad)
- 2D drawings
- Basics of 3D models
Additional information for students: previous knowledge etc.
No prior knowledge.
Assessment criteria
Doing exercises and participating in joint knowledge building. Tracking task completion and participation activity using the tools of the e-learning environment. Demonstrating familiarity with the target groups of their profession.
Assessment scale
1-5
Failed (0)
The student does not met the requirements for digital design.
Assessment criteria: level 1 (assessment scale 1–5)
The student is able to produce drawings and models with CAD software according to the instructions.
Assessment criteria: level 3 (assessment scale 1–5)
The student is able to produce drawings and models in a versatile way with CAD software and to justify the choices he / she makes.
Assessment criteria: level 5 (assessment scale 1–5)
In addition to the previous knowledge and skills, the student has a developing attitude and the ability to transfer their knowledge to the entire work group.
Enrollment
06.05.2024 - 30.08.2024
Timing
02.09.2024 - 31.12.2024
Number of ECTS credits allocated
5 op
Virtual portion
5 op
Mode of delivery
Distance learning
Unit
Faculty of Technology (LAB)
Campus
E-campus, Lahti
Teaching languages
- Finnish
Seats
0 - 40
Degree programmes
- Bachelor’s Degree Programme in Wood Technology (in Finnish)
Teachers
- Ari Vesikko
Scheduling groups
- Verkkoluennot 1 (Size: 0. Open UAS: 0.)
Groups
-
TLTIPUU24KV
Small groups
- Lecture 1
Learning outcomes
The student is able to:
- basics of technical drawing
- Basics of CAD drawing
- read, edit and create technical 2D drawings
- Basics of 3D modeling
- create technical drawings in a 3D environment and visualize 3D assemblies
Implementation and methods of teaching
Student
- Understand various technical drawings
- is able to draw working and assembly drawings in accordance with the standards of the technical drawing
- know the basics of CAD drawing and modeling (SolidWorks and / or AutoCad)
- is able to draw technical drawings and edit them with CAD software
- can visualize 3D models and assemblies
Timing and attendance
Information and guidance during class and laboratory classes. Training and assignments on your own computer.
Learning material and recommended literature
Aimo Pere: Basics of machine drawing or equivalent manual.
Software support materials, teacher-produced material, and network-produced learning materials.
Alternative completion methods
RPL, recognition of prior learning.
Learning environment
IT- classroom, My computer, Moodle environment.
Student time use and work load
5 * 27 hours = 137 hours of student work including 50 hours of information and guidance.
Contents
Understanding of various technical drawings.
- Working and assembly drawings in accordance with standards.
- Basics of CAD drawing and modeling (SolidWorks and / or AutoCad)
- 2D drawings
- Basics of 3D models
Additional information for students: previous knowledge etc.
No prior knowledge.
Assessment criteria
Doing exercises and participating in joint knowledge building. Tracking task completion and participation activity using the tools of the e-learning environment. Demonstrating familiarity with the target groups of their profession.
Alternative method: Exam and assessment
Assessment scale
1-5
Failed (0)
The student does not met the requirements for digital design.
Assessment criteria: level 1 (assessment scale 1–5)
The student is able to produce drawings and models with CAD software according to the instructions.
Assessment criteria: level 3 (assessment scale 1–5)
The student is able to produce drawings and models in a versatile way with CAD software and to justify the choices he / she makes.
Assessment criteria: level 5 (assessment scale 1–5)
In addition to the previous knowledge and skills, the student has a developing attitude and the ability to transfer their knowledge to the entire work group.
Enrollment
20.11.2023 - 05.01.2024
Timing
08.01.2024 - 30.04.2024
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Unit
Faculty of Technology (LAB)
Campus
Lahti Campus
Teaching languages
- Finnish
Seats
0 - 30
Degree programmes
- Bachelor’s Degree Programme in Wood Technology (in Finnish)
Teachers
- Ari Vesikko
Scheduling groups
- Luennot 1 (Size: 30. Open UAS: 0.)
Groups
-
TLTIPUU23S
Small groups
- Lecture 1
Learning outcomes
The student is able to:
- basics of technical drawing
- Basics of CAD drawing
- read, edit and create technical 2D drawings
- Basics of 3D modeling
- create technical drawings in a 3D environment and visualize 3D assemblies
Implementation and methods of teaching
Student
- Understand various technical drawings
- is able to draw working and assembly drawings in accordance with the standards of the technical drawing
- know the basics of CAD drawing and modeling (SolidWorks and / or AutoCad)
- is able to draw technical drawings and edit them with CAD software
- can visualize 3D models and assemblies
Timing and attendance
Information and guidance during class and laboratory classes. Training and assignments on your own computer.
Learning material and recommended literature
Aimo Pere: Basics of machine drawing or equivalent manual.
Software support materials, teacher-produced material, and network-produced learning materials.
Alternative completion methods
RPL, recognition of prior learning.
Learning environment
IT- classroom, My computer, Moodle environment.
Student time use and work load
5 * 27 hours = 137 hours of student work including 50 hours of information and guidance.
Contents
Understanding of various technical drawings.
- Working and assembly drawings in accordance with standards.
- Basics of CAD drawing and modeling (SolidWorks and / or AutoCad)
- 2D drawings
- Basics of 3D models
Additional information for students: previous knowledge etc.
No prior knowledge.
Assessment criteria
Doing exercises and participating in joint knowledge building. Tracking task completion and participation activity using the tools of the e-learning environment. Demonstrating familiarity with the target groups of their profession.
Alternative method: Exam and assessment
Assessment scale
1-5
Failed (0)
The student does not met the requirements for digital design.
Assessment criteria: level 1 (assessment scale 1–5)
The student is able to produce drawings and models with CAD software according to the instructions.
Assessment criteria: level 3 (assessment scale 1–5)
The student is able to produce drawings and models in a versatile way with CAD software and to justify the choices he / she makes.
Assessment criteria: level 5 (assessment scale 1–5)
In addition to the previous knowledge and skills, the student has a developing attitude and the ability to transfer their knowledge to the entire work group.
Enrollment
15.05.2023 - 01.09.2023
Timing
04.09.2023 - 17.12.2023
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Unit
Faculty of Technology (LAB)
Campus
E-campus, Lahti
Teaching languages
- Finnish
Degree programmes
- Bachelor’s Degree Programme in Wood Technology (in Finnish)
Teachers
- Ari Vesikko
Scheduling groups
- Verkkoluento 1 (Size: 0. Open UAS: 0.)
Groups
-
TLTIPUU23KV
Small groups
- Verkkoluento 1
Learning outcomes
The student is able to:
- basics of technical drawing
- Basics of CAD drawing
- read, edit and create technical 2D drawings
- Basics of 3D modeling
- create technical drawings in a 3D environment and visualize 3D assemblies
Implementation and methods of teaching
Student
- Understand various technical drawings
- is able to draw working and assembly drawings in accordance with the standards of the technical drawing
- know the basics of CAD drawing and modeling (SolidWorks and / or AutoCad)
- is able to draw technical drawings and edit them with CAD software
- can visualize 3D models and assemblies
Timing and attendance
Information and guidance during class and laboratory classes. Training and assignments on your own computer.
Learning material and recommended literature
Aimo Pere: Basics of machine drawing or equivalent manual.
Software support materials, teacher-produced material, and network-produced learning materials.
Alternative completion methods
RPL, recognition of prior learning.
Learning environment
IT- classroom, My computer, Moodle environment.
Student time use and work load
5 * 27 hours = 137 hours of student work including 50 hours of information and guidance.
Contents
Understanding of various technical drawings.
- Working and assembly drawings in accordance with standards.
- Basics of CAD drawing and modeling (SolidWorks and / or AutoCad)
- 2D drawings
- Basics of 3D models
Additional information for students: previous knowledge etc.
No prior knowledge.
Assessment criteria
Doing exercises and participating in joint knowledge building. Tracking task completion and participation activity using the tools of the e-learning environment. Demonstrating familiarity with the target groups of their profession.
Alternative method: Exam and assessment
Assessment scale
1-5
Failed (0)
The student does not met the requirements for digital design.
Assessment criteria: level 1 (assessment scale 1–5)
The student is able to produce drawings and models with CAD software according to the instructions.
Assessment criteria: level 3 (assessment scale 1–5)
The student is able to produce drawings and models in a versatile way with CAD software and to justify the choices he / she makes.
Assessment criteria: level 5 (assessment scale 1–5)
In addition to the previous knowledge and skills, the student has a developing attitude and the ability to transfer their knowledge to the entire work group.
Enrollment
21.11.2022 - 08.01.2023
Timing
01.01.2023 - 30.04.2023
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Unit
Faculty of Technology (LAB)
Campus
Lahti Campus
Teaching languages
- Finnish
Seats
0 - 30
Degree programmes
- Bachelor’s Degree Programme in Wood Technology (in Finnish)
Teachers
- Ari Vesikko
Scheduling groups
- Luennot 1 (Size: 0. Open UAS: 0.)
Groups
-
TLTIPUU22S
Small groups
- Luennot 1
Learning outcomes
The student is able to:
- basics of technical drawing
- Basics of CAD drawing
- read, edit and create technical 2D drawings
- Basics of 3D modeling
- create technical drawings in a 3D environment and visualize 3D assemblies
Implementation and methods of teaching
Student
- Understand various technical drawings
- is able to draw working and assembly drawings in accordance with the standards of the technical drawing
- know the basics of CAD drawing and modeling (SolidWorks and / or AutoCad)
- is able to draw technical drawings and edit them with CAD software
- can visualize 3D models and assemblies
Timing and attendance
Information and guidance during class and laboratory classes. Training and assignments on your own computer.
Learning material and recommended literature
Aimo Pere: Basics of machine drawing or equivalent manual.
Software support materials, teacher-produced material, and network-produced learning materials.
Alternative completion methods
RPL, recognition of prior learning.
Learning environment
IT- classroom, My computer, Moodle environment.
Student time use and work load
5 * 27 hours = 137 hours of student work including 50 hours of information and guidance.
Contents
Understanding of various technical drawings.
- Working and assembly drawings in accordance with standards.
- Basics of CAD drawing and modeling (SolidWorks and / or AutoCad)
- 2D drawings
- Basics of 3D models
Additional information for students: previous knowledge etc.
No prior knowledge.
Assessment criteria
Doing exercises and participating in joint knowledge building. Tracking task completion and participation activity using the tools of the e-learning environment. Demonstrating familiarity with the target groups of their profession.
Alternative method: Exam and assessment
Assessment scale
1-5
Failed (0)
The student does not met the requirements for digital design.
Assessment criteria: level 1 (assessment scale 1–5)
The student is able to produce drawings and models with CAD software according to the instructions.
Assessment criteria: level 3 (assessment scale 1–5)
The student is able to produce drawings and models in a versatile way with CAD software and to justify the choices he / she makes.
Assessment criteria: level 5 (assessment scale 1–5)
In addition to the previous knowledge and skills, the student has a developing attitude and the ability to transfer their knowledge to the entire work group.
Enrollment
01.07.2022 - 04.09.2022
Timing
01.09.2022 - 16.12.2022
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Unit
Faculty of Technology (LAB)
Campus
Lahti Campus
Teaching languages
- Finnish
Degree programmes
- Bachelor’s Degree Programme in Wood Technology (in Finnish)
Teachers
- Ari Vesikko
Scheduling groups
- Luennot 1 (Size: 30. Open UAS: 0.)
Groups
-
TLTIPUU22KM
Small groups
- Luennot 1
Learning outcomes
The student is able to:
- basics of technical drawing
- Basics of CAD drawing
- read, edit and create technical 2D drawings
- Basics of 3D modeling
- create technical drawings in a 3D environment and visualize 3D assemblies
Implementation and methods of teaching
Student
- Understand various technical drawings
- is able to draw working and assembly drawings in accordance with the standards of the technical drawing
- know the basics of CAD drawing and modeling (SolidWorks and / or AutoCad)
- is able to draw technical drawings and edit them with CAD software
- can visualize 3D models and assemblies
Timing and attendance
Information and guidance during class and laboratory classes. Training and assignments on your own computer.
Learning material and recommended literature
Aimo Pere: Basics of machine drawing or equivalent manual.
Software support materials, teacher-produced material, and network-produced learning materials.
Alternative completion methods
RPL, recognition of prior learning.
Learning environment
My computer, Moodle environment.
Student time use and work load
5 * 27 hours = 137 hours of student work including 50 hours of information and guidance.
Contents
Understanding of various technical drawings.
- Working and assembly drawings in accordance with standards.
- Basics of CAD drawing and modeling (SolidWorks and / or AutoCad)
- 2D drawings
- Basics of 3D models
Additional information for students: previous knowledge etc.
No prior knowledge.
Assessment criteria
Doing exercises and participating in joint knowledge building. Tracking task completion and participation activity using the tools of the e-learning environment. Demonstrating familiarity with the target groups of their profession.
Alternative method: Exam and assessment
Assessment scale
1-5
Failed (0)
The student has not met the requirements for digital design.
Assessment criteria: level 1 (assessment scale 1–5)
The student is able to produce drawings and models with CAD software according to the instructions.
Assessment criteria: level 3 (assessment scale 1–5)
The student is able to produce drawings and models in a versatile way with CAD software and to justify the choices he / she makes.
Assessment criteria: level 5 (assessment scale 1–5)
In addition to the previous knowledge and skills, the student has a developing attitude and the ability to transfer their knowledge to the entire work group.
Enrollment
19.11.2021 - 09.01.2022
Timing
10.01.2022 - 30.04.2022
Number of ECTS credits allocated
5 op
Virtual portion
3 op
Mode of delivery
40 % Contact teaching, 60 % Distance learning
Unit
Faculty of Technology (LAB)
Campus
Lahti Campus
Teaching languages
- Finnish
Seats
10 - 30
Degree programmes
- Bachelor’s Degree Programme in Wood Technology (in Finnish)
Teachers
- Ari Vesikko
Scheduling groups
- Luennot 1 (Size: 0. Open UAS: 0.)
Groups
-
TLTIPUU21S
Small groups
Learning outcomes
The student is able to:
- basics of technical drawing
- Basics of CAD drawing
- read, edit and create technical 2D drawings
- Basics of 3D modeling
- create technical drawings in a 3D environment and visualize 3D assemblies
Assessment scale
1-5