Mathematics in Technology 1Laajuus (3 op)
Tunnus: AT00CH48
Laajuus
3 op
Opetuskieli
- englanti
Vastuuhenkilö
- Päivi Porras
Osaamistavoitteet
Student is able to:
- recognise different polynomial equations, functions, and polynomial graphics
- solve inequalities
- solve simultaneous equations with the software
- solve basic space vectors
- utilise space vectors
- solve exponential and logarithm functions
Ilmoittautumisaika
20.11.2023 - 05.01.2024
Ajoitus
08.01.2024 - 31.05.2024
Opintopistemäärä
3 op
Virtuaaliosuus
3 op
Toteutustapa
Etäopetus
Yksikkö
Teknologia (LAB)
Toimipiste
Verkkokampus, Lahti
Opetuskielet
- Englanti
Paikat
1 - 100
Koulutus
- Bachelor’s Degree Programme in Sustainable Solutions Engineering
Opettaja
- Päivi Porras
Opetusryhmät
- Verkkoluento 1 (Koko: 0. Avoin AMK: 0.)
Ryhmät
-
TLTISSE23SVBachelor’s Degree Programme in Sustainable Solutions Engineering 23SV Lahti
Pienryhmät
- Verkkoluento 1
Osaamistavoitteet
Student is able to:
- recognise different polynomial equations, functions, and polynomial graphics
- solve inequalities
- solve simultaneous equations with the software
- solve basic space vectors
- utilise space vectors
- solve exponential and logarithm functions
Toteutustapa ja opetusmenetelmät
This course has online lectures based on timetable of Sustainability students in LAB University of Applied Sciences. Material in moodle can also be studied without attending the lectures.
Ajoitus ja läsnäolo
Online lectures are on Tuesdays at 12.15 - 14.00 and on Wednesdays at 14.15-16.00.
Oppimateriaali ja suositeltava kirjallisuus
will be announced at the beginning of the course
Sisältö
System of equations and matrices
Polynomial functions and inequalities
Geometry 3d
Vectors 3d (incl. directional cosines, dot product, and projection)
Exponential and logarithmic functions and equalities
Lisätietoja opiskelijalle: mm. edeltävä osaaminen
Basics of Mathematics in Technology or corresponding knowledge
Arviointimenetelmät
will be discussed together
Arviointiasteikko
1-5
Arviointikriteerit: taso 1: (arviointiasteikko 1-5)
The student is familiar with mathematical methods and is able to perform simple mechanical calculation tasks.
Arviointikriteerit: taso 3 (arviointiasteikko 1-5)
The student understands the requirements of mathematical methods and is able to apply basic mathematics to some extent in engineering tasks.
Arviointikriteerit: taso 5 (arviointiasteikko 1-5)
The student masters mathematical methods and is able to analyse mathematical tasks at the engineering level without problems.
Ilmoittautumisaika
20.11.2023 - 05.01.2024
Ajoitus
01.01.2024 - 31.07.2024
Opintopistemäärä
3 op
Toteutustapa
Lähiopetus
Yksikkö
Teknologia (LAB)
Toimipiste
Lappeenrannan kampus
Opetuskielet
- Englanti
Koulutus
- Bachelor’s Degree Programme in Industrial Mechanical Engineering
Opettaja
- Juha Hyytiäinen
Opetusryhmät
- Lectures (Koko: 0. Avoin AMK: 0.)
Ryhmät
-
TLPRMEC23SBachelor's Degree Programme in Industrial Mechanical Engineering 23S Lappeenranta
Pienryhmät
- Lectures
Osaamistavoitteet
Student is able to:
- recognise different polynomial equations, functions, and polynomial graphics
- solve inequalities
- solve simultaneous equations with the software
- solve basic space vectors
- utilise space vectors
- solve exponential and logarithm functions
Toteutustapa ja opetusmenetelmät
Contact lectures with Moodle assignments
Oppimateriaali ja suositeltava kirjallisuus
will be announced at the beginning of the course
Sisältö
System of equations and matrices
Polynomial functions and inequalities
Geometry 3d
Vectors 3d (incl. directional cosines, dot product, and projection)
Exponential and logarithmic functions and equalities
Lisätietoja opiskelijalle: mm. edeltävä osaaminen
Basics of Mathematics in Technology or corresponding knowledge
Arviointimenetelmät
will be discussed together
Arviointiasteikko
1-5
Arviointikriteerit: taso 1: (arviointiasteikko 1-5)
The student is familiar with mathematical methods and is able to perform simple mechanical calculation tasks.
Arviointikriteerit: taso 3 (arviointiasteikko 1-5)
The student understands the requirements of mathematical methods and is able to apply basic mathematics to some extent in engineering tasks.
Arviointikriteerit: taso 5 (arviointiasteikko 1-5)
The student masters mathematical methods and is able to analyse mathematical tasks at the engineering level without problems.
Ilmoittautumisaika
20.11.2023 - 05.01.2024
Ajoitus
01.01.2024 - 31.07.2024
Opintopistemäärä
3 op
Toteutustapa
Lähiopetus
Yksikkö
Teknologia (LAB)
Toimipiste
Lappeenrannan kampus
Opetuskielet
- Englanti
Koulutus
- Bachelor's Degree Programme in Industrial Information Technology
Opettaja
- Juha Hyytiäinen
Opetusryhmät
- Luennot 1 (Koko: 500. Avoin AMK: 0.)
Ryhmät
-
TLPRIIT23SBachelor's Degree Programme in Industrial Information Technology 23S Lappeenranta
Pienryhmät
- Luennot 1
Osaamistavoitteet
Student is able to:
- recognise different polynomial equations, functions, and polynomial graphics
- solve inequalities
- solve simultaneous equations with the software
- solve basic space vectors
- utilise space vectors
- solve exponential and logarithm functions
Toteutustapa ja opetusmenetelmät
Contact lectures with Moodle assignments
Oppimateriaali ja suositeltava kirjallisuus
will be announced at the beginning of the course
Sisältö
System of equations and matrices
Polynomial functions and inequalities
Geometry 3d
Vectors 3d (incl. directional cosines, dot product, and projection)
Exponential and logarithmic functions and equalities
Lisätietoja opiskelijalle: mm. edeltävä osaaminen
Basics of Mathematics in Technology or corresponding knowledge
Arviointimenetelmät
will be discussed together
Arviointiasteikko
1-5
Arviointikriteerit: taso 1: (arviointiasteikko 1-5)
The student is familiar with mathematical methods and is able to perform simple mechanical calculation tasks.
Arviointikriteerit: taso 3 (arviointiasteikko 1-5)
The student understands the requirements of mathematical methods and is able to apply basic mathematics to some extent in engineering tasks.
Arviointikriteerit: taso 5 (arviointiasteikko 1-5)
The student masters mathematical methods and is able to analyse mathematical tasks at the engineering level without problems.
Ilmoittautumisaika
21.11.2022 - 08.01.2023
Ajoitus
09.01.2023 - 31.05.2023
Opintopistemäärä
3 op
Toteutustapa
Lähiopetus
Yksikkö
Teknologia (LAB)
Toimipiste
Lappeenrannan kampus
Opetuskielet
- Englanti
Koulutus
- Bachelor’s Degree Programme in Mechanical Engineering (2021, 2022, 2023)
Opettaja
- Päivi Porras
Opetusryhmät
- Mech (Koko: 0. Avoin AMK: 0.)
- atk (Koko: 0. Avoin AMK: 0.)
Ryhmät
-
TLPRMEC22SBachelor's Degree Programme in Mechanical Engineering 22S Lappeenranta
Pienryhmät
- Mech
- atk
Osaamistavoitteet
Student is able to:
- recognise different polynomial equations, functions, and polynomial graphics
- solve inequalities
- solve simultaneous equations with the software
- solve basic space vectors
- utilise space vectors
- solve exponential and logarithm functions
Toteutustapa ja opetusmenetelmät
Contact lectures with Moodle assignments
Oppimateriaali ja suositeltava kirjallisuus
will be announced at the beginning of the course
Sisältö
System of equations and matrices
Polynomial functions and inequalities
Geometry 3d
Vectors 3d (incl. directional cosines, dot product, and projection)
Exponential and logarithmic functions and equalities
Lisätietoja opiskelijalle: mm. edeltävä osaaminen
Basics of Mathematics in Technology or corresponding knowledge
Arviointimenetelmät
will be discussed together
Arviointiasteikko
1-5
Arviointikriteerit: taso 1: (arviointiasteikko 1-5)
The student is familiar with mathematical methods and is able to perform simple mechanical calculation tasks.
Arviointikriteerit: taso 3 (arviointiasteikko 1-5)
The student understands the requirements of mathematical methods and is able to apply basic mathematics to some extent in engineering tasks.
Arviointikriteerit: taso 5 (arviointiasteikko 1-5)
The student masters mathematical methods and is able to analyse mathematical tasks at the engineering level without problems.
Ilmoittautumisaika
21.11.2022 - 08.01.2023
Ajoitus
09.01.2023 - 30.04.2023
Opintopistemäärä
3 op
Toteutustapa
Lähiopetus
Yksikkö
Teknologia (LAB)
Toimipiste
Lappeenrannan kampus
Opetuskielet
- Englanti
Koulutus
- Bachelor's Degree Programme in Industrial Information Technology
Opettaja
- Tommi Veijalainen
Opetusryhmät
- Luennot 1 (Koko: 500. Avoin AMK: 0.)
Ryhmät
-
TLPRIIT22SBachelor's Degree Programme in Industrial Information Technology 22S Lappeenranta
Pienryhmät
- Luennot 1
Osaamistavoitteet
Student is able to:
- recognise different polynomial equations, functions, and polynomial graphics
- solve inequalities
- solve simultaneous equations with the software
- solve basic space vectors
- utilise space vectors
- solve exponential and logarithm functions
Toteutustapa ja opetusmenetelmät
Contact lectures with Moodle assignments
Oppimateriaali ja suositeltava kirjallisuus
will be announced at the beginning of the course
Sisältö
System of equations and matrices
Polynomial functions and inequalities
Geometry 3d
Vectors 3d (incl. directional cosines, dot product, and projection)
Exponential and logarithmic functions and equalities
Lisätietoja opiskelijalle: mm. edeltävä osaaminen
Basics of Mathematics in Technology or corresponding knowledge
Arviointimenetelmät
will be discussed together
Arviointiasteikko
1-5
Arviointikriteerit: taso 1: (arviointiasteikko 1-5)
The student is familiar with mathematical methods and is able to perform simple mechanical calculation tasks.
Arviointikriteerit: taso 3 (arviointiasteikko 1-5)
The student understands the requirements of mathematical methods and is able to apply basic mathematics to some extent in engineering tasks.
Arviointikriteerit: taso 5 (arviointiasteikko 1-5)
The student masters mathematical methods and is able to analyse mathematical tasks at the engineering level without problems.
Ilmoittautumisaika
21.11.2022 - 25.01.2023
Ajoitus
09.01.2023 - 31.05.2023
Opintopistemäärä
3 op
Virtuaaliosuus
3 op
Toteutustapa
Etäopetus
Yksikkö
Teknologia (LAB)
Toimipiste
Verkkokampus
Opetuskielet
- Englanti
Paikat
1 - 100
Koulutus
- Bachelor’s Degree Programme in Sustainable Solutions Engineering
Opettaja
- Päivi Porras
Opetusryhmät
- SSE (Koko: 0. Avoin AMK: 0.)
Ryhmät
-
TLTISSE22SVBachelor’s Degree Programme in Sustainable Solutions Engineering 22SV Lahti
Pienryhmät
- SSE
Osaamistavoitteet
Student is able to:
- recognise different polynomial equations, functions, and polynomial graphics
- solve inequalities
- solve simultaneous equations with the software
- solve basic space vectors
- utilise space vectors
- solve exponential and logarithm functions
Toteutustapa ja opetusmenetelmät
This course has online lectures based on timetable of Sustainability students in LAB University of Applied Sciences. Material in moodle can also be studied without attending the lectures.
Oppimateriaali ja suositeltava kirjallisuus
will be announced at the beginning of the course
Sisältö
System of equations and matrices
Polynomial functions and inequalities
Geometry 3d
Vectors 3d (incl. directional cosines, dot product, and projection)
Exponential and logarithmic functions and equalities
Lisätietoja opiskelijalle: mm. edeltävä osaaminen
Basics of Mathematics in Technology or corresponding knowledge
Arviointimenetelmät
Arviointi on selitetty kurssipohjalla moodlessa.
Arviointiasteikko
1-5
Arviointikriteerit: taso 1: (arviointiasteikko 1-5)
The student is familiar with mathematical methods and is able to perform simple mechanical calculation tasks.
Arviointikriteerit: taso 3 (arviointiasteikko 1-5)
The student understands the requirements of mathematical methods and is able to apply basic mathematics to some extent in engineering tasks.
Arviointikriteerit: taso 5 (arviointiasteikko 1-5)
The student masters mathematical methods and is able to analyse mathematical tasks at the engineering level without problems.
Ilmoittautumisaika
22.11.2021 - 09.01.2022
Ajoitus
10.01.2022 - 29.04.2022
Opintopistemäärä
3 op
Virtuaaliosuus
3 op
Toteutustapa
Etäopetus
Yksikkö
Teknologia (LAB)
Toimipiste
Verkkokampus, Lahti
Opetuskielet
- Englanti
Koulutus
- Energia- ja ympäristötekniikan koulutus (2014-2021)
Opettaja
- Päivi Porras
Opetusryhmät
- Luennot 1 (Koko: 0. Avoin AMK: 0.)
Ryhmät
-
TLTISSE21SVBachelor’s Degree Programme in Sustainable Solutions Engineering 21S Lahti
Pienryhmät
- Luennot 1
Osaamistavoitteet
Student is able to:
- recognise different polynomial equations, functions, and polynomial graphics
- solve inequalities
- solve simultaneous equations with the software
- solve basic space vectors
- utilise space vectors
- solve exponential and logarithm functions
Toteutustapa ja opetusmenetelmät
This course has online lectures based on timetable of Sustainability students in LAB University of Applied Sciences. Material in moodle can also be studied without attending the lectures.
Ajoitus ja läsnäolo
Online lectures are on Tuesdays at 12.15 - 14.00 and on Wednesdays at 14.15-16.00.
Oppimateriaali ja suositeltava kirjallisuus
will be announced at the beginning of the course
Sisältö
System of equations and matrices
Polynomial functions and inequalities
Geometry 3d
Vectors 3d (incl. directional cosines, dot product, and projection)
Exponential and logarithmic functions and equalities
Lisätietoja opiskelijalle: mm. edeltävä osaaminen
Basics of Mathematics in Technology or corresponding knowledge
Arviointimenetelmät
will be discussed together
Arviointiasteikko
1-5
Arviointikriteerit: taso 1: (arviointiasteikko 1-5)
The student is familiar with mathematical methods and is able to perform simple mechanical calculation tasks.
Arviointikriteerit: taso 3 (arviointiasteikko 1-5)
The student understands the requirements of mathematical methods and is able to apply basic mathematics to some extent in engineering tasks.
Arviointikriteerit: taso 5 (arviointiasteikko 1-5)
The student masters mathematical methods and is able to analyse mathematical tasks at the engineering level without problems.
Ilmoittautumisaika
19.11.2021 - 09.01.2022
Ajoitus
03.01.2022 - 31.05.2022
Opintopistemäärä
3 op
Toteutustapa
Lähiopetus
Yksikkö
Teknologia (LAB)
Toimipiste
Lappeenrannan kampus
Opetuskielet
- Suomi
Koulutus
- Bachelor's Degree Programme in Mechanical Engineering and Production Technology (2016-2021)
Opettaja
- Päivi Porras
- Seppo Toivanen
Opetusryhmät
- Luennot 1 (Koko: 0. Avoin AMK: 0.)
Ryhmät
-
TLPRMEC21SBachelor's Degree Programme in Mechanical Engineering 21S Lappeenranta
Pienryhmät
- Luennot 1
Osaamistavoitteet
Student is able to:
- recognise different polynomial equations, functions, and polynomial graphics
- solve inequalities
- solve simultaneous equations with the software
- solve basic space vectors
- utilise space vectors
- solve exponential and logarithm functions
Arviointiasteikko
1-5
Ilmoittautumisaika
19.11.2021 - 09.01.2022
Ajoitus
01.01.2022 - 31.07.2022
Opintopistemäärä
3 op
Toteutustapa
Lähiopetus
Yksikkö
Teknologia (LAB)
Toimipiste
Lappeenrannan kampus
Opetuskielet
- Englanti
Koulutus
- Bachelor's Degree Programme in Industrial Information Technology
Opettaja
- Päivi Porras
Opetusryhmät
- Luennot 1 (Koko: 0. Avoin AMK: 0.)
Ryhmät
-
TLPRIIT21SBachelor's Degree Programme in Industrial Information Technology 21S Lappeenranta
Pienryhmät
- Luennot 1
Osaamistavoitteet
Student is able to:
- recognise different polynomial equations, functions, and polynomial graphics
- solve inequalities
- solve simultaneous equations with the software
- solve basic space vectors
- utilise space vectors
- solve exponential and logarithm functions
Arviointiasteikko
1-5