Basic studies in physicsLaajuus (3 cr)
Code: AT00BT70
Credits
3 op
Objective
Student is able to
- understand the purpose of the physics in technology
- describe and utilize the SI-unit system and implement
- solve mathematical problems in kinematics, mechanics and thermodynamics
- utilize vectors
Enrollment
20.11.2024 - 10.01.2025
Timing
07.01.2025 - 30.04.2025
Number of ECTS credits allocated
3 op
Virtual portion
3 op
Mode of delivery
Distance learning
Unit
Faculty of Technology (LAB)
Campus
E-campus
Teaching languages
- Finnish
Seats
0 - 200
Degree programmes
- Bachelor’s Degree Programme in Electrical and Automation Engineering (in Finnish)
Teachers
- Juha Pere
Scheduling groups
- Verkkoluento 1 (Size: 0. Open UAS: 0.)
Groups
-
TLTISAT25KM
Small groups
- Online lecture 1
Learning outcomes
Student is able to
- understand the purpose of the physics in technology
- describe and utilize the SI-unit system and implement
- solve mathematical problems in kinematics, mechanics and thermodynamics
- utilize vectors
Implementation and methods of teaching
Lectures, videos, exercises
Learning material and recommended literature
The pages in Moodle
Learning environment
Moodle, Zoom
Contents
SI-units
Basics of mechanics
Heat and energy
Force and vectors
Efficiency
Assessment scale
1-5
Enrollment
20.11.2024 - 03.01.2025
Timing
07.01.2025 - 25.04.2025
Number of ECTS credits allocated
3 op
Mode of delivery
Contact teaching
Unit
Faculty of Technology (LAB)
Campus
Lahti Campus
Teaching languages
- Finnish
Seats
0 - 35
Degree programmes
- Bachelor’s Degree Programme in Wood Technology (in Finnish)
Teachers
- Arttu Siukola
Scheduling groups
- Luennot 1 (Size: 0. Open UAS: 0.)
Groups
-
TLTIPUU24S
Small groups
- Lecture 1
Learning outcomes
Student is able to
- understand the purpose of the physics in technology
- describe and utilize the SI-unit system and implement
- solve mathematical problems in kinematics, mechanics and thermodynamics
- utilize vectors
Implementation and methods of teaching
Lectures, exercises, Moodle pages
Learning material and recommended literature
The pages in Moodle
Learning environment
Moodle, classroom
Contents
SI-units
Basics of mechanics
Heat and energy
Force and vectors
Efficiency
Assessment criteria
Exercises and exam
Assessment scale
1-5
Enrollment
20.11.2024 - 10.01.2025
Timing
01.01.2025 - 30.04.2025
Number of ECTS credits allocated
3 op
Virtual portion
3 op
Mode of delivery
Distance learning
Unit
Faculty of Technology (LAB)
Campus
E-campus
Teaching languages
- Finnish
Seats
0 - 100
Degree programmes
- Bachelor's Degree Programme in Sustainable Urban Planning (in Finnish)
Teachers
- Juha Pere
Scheduling groups
- Verkkoluento 1 (Size: 0. Open UAS: 0.)
- Avoimen ammattikorkeakoulun kiintiö (Size: 5. Open UAS: 5.)
Groups
-
TLTIKKS24SM
Small groups
- Online lecture 1
- Open UAS quota
Learning outcomes
Student is able to
- understand the purpose of the physics in technology
- describe and utilize the SI-unit system and implement
- solve mathematical problems in kinematics, mechanics and thermodynamics
- utilize vectors
Implementation and methods of teaching
Lectures, videos, exercises
Learning material and recommended literature
The pages in Moodle
Learning environment
Moodle, Zoom
Contents
SI-units
Basics of mechanics
Heat and energy
Force and vectors
Efficiency
Assessment scale
1-5
Enrollment
06.05.2024 - 08.09.2024
Timing
02.09.2024 - 31.12.2024
Number of ECTS credits allocated
3 op
Mode of delivery
Contact teaching
Unit
Faculty of Technology (LAB)
Campus
Lahti Campus
Teaching languages
- Finnish
Seats
0 - 40
Degree programmes
- Bachelor’s Degree Programme in Electrical and Automation Engineering (in Finnish)
Teachers
- Arttu Siukola
Scheduling groups
- Luennot 1 (Size: 0. Open UAS: 0.)
Groups
-
TLTISAT24S
Small groups
- Lecture 1
Learning outcomes
Student is able to
- understand the purpose of the physics in technology
- describe and utilize the SI-unit system and implement
- solve mathematical problems in kinematics, mechanics and thermodynamics
- utilize vectors
Implementation and methods of teaching
Lectures, exercises, Moodle pages
Learning material and recommended literature
The pages in Moodle
Learning environment
Moodle, classroom
Contents
SI-units
Basics of mechanics
Heat and energy
Force and vectors
Efficiency
Assessment criteria
Exercises and exam
Assessment scale
1-5
Enrollment
06.05.2024 - 30.08.2024
Timing
02.09.2024 - 31.12.2024
Number of ECTS credits allocated
3 op
Virtual portion
3 op
Mode of delivery
Distance learning
Unit
Faculty of Technology (LAB)
Campus
E-campus
Teaching languages
- Finnish
Degree programmes
- Bachelor’s Degree Programme in Wood Technology (in Finnish)
Teachers
- Petteri Karkkulainen
Scheduling groups
- Verkkoluento 1 (Size: 0. Open UAS: 0.)
Groups
-
TLTIPUU24KV
Small groups
- Online lecture 1
Learning outcomes
Student is able to
- understand the purpose of the physics in technology
- describe and utilize the SI-unit system and implement
- solve mathematical problems in kinematics, mechanics and thermodynamics
- utilize vectors
Implementation and methods of teaching
Lectures, videos, exercises
Learning material and recommended literature
The pages in Moodle
Learning environment
Moodle, Zoom
Contents
SI-units
Basics of mechanics
Heat and energy
Force and vectors
Efficiency
Assessment criteria
Exercises and exam
Assessment scale
1-5
Enrollment
06.05.2024 - 30.08.2024
Timing
02.09.2024 - 31.12.2024
Number of ECTS credits allocated
3 op
Mode of delivery
Contact teaching
Unit
Faculty of Technology (LAB)
Campus
Lappeenranta Campus
Teaching languages
- Finnish
Degree programmes
- Bachelor’s Degree Programme in Electrical and Automation Engineering (in Finnish)
Teachers
- Petteri Karkkulainen
Scheduling groups
- Luennot 1 (Size: 0. Open UAS: 0.)
Groups
-
TLPRSAT24S
Small groups
- Lecture 1
Learning outcomes
Student is able to
- understand the purpose of the physics in technology
- describe and utilize the SI-unit system and implement
- solve mathematical problems in kinematics, mechanics and thermodynamics
- utilize vectors
Assessment scale
1-5
Enrollment
06.05.2024 - 30.08.2024
Timing
02.09.2024 - 13.12.2024
Number of ECTS credits allocated
3 op
Virtual portion
3 op
Mode of delivery
Distance learning
Unit
Faculty of Technology (LAB)
Campus
E-campus, Lahti
Teaching languages
- Finnish
Degree programmes
- Bachelor's Degree Programme in Information Technology (in Finnish)
Teachers
- Tommi Veijalainen
Scheduling groups
- Luennot 1 (Size: 500. Open UAS: 0.)
Groups
-
TLTITVT24SV
Small groups
- Lecture 1
Learning outcomes
Student is able to
- understand the purpose of the physics in technology
- describe and utilize the SI-unit system and implement
- solve mathematical problems in kinematics, mechanics and thermodynamics
- utilize vectors
Assessment scale
1-5
Enrollment
06.05.2024 - 30.08.2024
Timing
02.09.2024 - 22.12.2024
Number of ECTS credits allocated
3 op
Mode of delivery
Contact teaching
Unit
Faculty of Technology (LAB)
Campus
Lappeenranta Campus
Teaching languages
- Finnish
Degree programmes
- Bachelor's Degree Programme in Construction Engineering (in Finnish)
Teachers
- Petteri Karkkulainen
Scheduling groups
- Luennot 1 (Size: 0. Open UAS: 0.)
Groups
-
TLPRRAK24S
Small groups
- Lecture 1
Learning outcomes
Student is able to
- understand the purpose of the physics in technology
- describe and utilize the SI-unit system and implement
- solve mathematical problems in kinematics, mechanics and thermodynamics
- utilize vectors
Assessment scale
1-5
Enrollment
18.03.2024 - 03.06.2024
Timing
01.05.2024 - 31.07.2024
Number of ECTS credits allocated
3 op
Virtual portion
3 op
Mode of delivery
Distance learning
Unit
Faculty of Technology (LAB)
Campus
E-campus
Teaching languages
- Finnish
Seats
0 - 250
Degree programmes
- Summer studies (in Finnish)
Teachers
- Juha Pere
Groups
-
LABKES24KH
Learning outcomes
Student is able to
- understand the purpose of the physics in technology
- describe and utilize the SI-unit system and implement
- solve mathematical problems in kinematics, mechanics and thermodynamics
- utilize vectors
Implementation and methods of teaching
videos, exercises
Learning material and recommended literature
The pages in Moodle
Learning environment
Moodle
Contents
SI-units
Basics of mechanics
Heat and energy
Force and vectors
Efficiency
Additional information for students: previous knowledge etc.
Tekniikan fysiikan perusteet AT00BT70
Basic Studies in Physics AT00CH50
are the same course. You cannot have the both of them.
Assessment scale
1-5
Enrollment
20.11.2023 - 12.01.2024
Timing
08.01.2024 - 30.04.2024
Number of ECTS credits allocated
3 op
Virtual portion
3 op
Mode of delivery
Distance learning
Unit
Faculty of Technology (LAB)
Campus
E-campus
Teaching languages
- Finnish
Seats
0 - 200
Degree programmes
- Bachelor's Degree Programme in Mechanical Engineering (in Finnish)
- Bachelor’s Degree Programme in Electrical and Automation Engineering (in Finnish)
- Bachelor’s Degree Programme in Environmental Engineering (in Finnish)
Teachers
- Juha Pere
Scheduling groups
- Harjoitukset 1 (Size: 0. Open UAS: 0.)
Groups
-
TLTISAT24KM
-
TLTIENTEC24KM
-
TLTIKONE24KV
Small groups
- Practice 1
Learning outcomes
Student is able to
- understand the purpose of the physics in technology
- describe and utilize the SI-unit system and implement
- solve mathematical problems in kinematics, mechanics and thermodynamics
- utilize vectors
Implementation and methods of teaching
Lectures, videos, exercises
Learning material and recommended literature
The pages in Moodle
Learning environment
Moodle, Zoom
Contents
SI-units
Basics of mechanics
Heat and energy
Force and vectors
Efficiency
Assessment scale
1-5
Enrollment
20.11.2023 - 05.01.2024
Timing
01.01.2024 - 30.04.2024
Number of ECTS credits allocated
3 op
Mode of delivery
Contact teaching
Unit
Faculty of Technology (LAB)
Campus
Lahti Campus
Teaching languages
- Finnish
Seats
0 - 35
Degree programmes
- Bachelor’s Degree Programme in Wood Technology (in Finnish)
Teachers
- Juha Pere
Scheduling groups
- Harjoitus R 1 (Size: 0. Open UAS: 0.)
Groups
-
TLTIPUU23S
Small groups
- Practice R 1
Learning outcomes
Student is able to
- understand the purpose of the physics in technology
- describe and utilize the SI-unit system and implement
- solve mathematical problems in kinematics, mechanics and thermodynamics
- utilize vectors
Implementation and methods of teaching
Lectures, exercises, Moodle pages
Learning material and recommended literature
The pages in Moodle
Learning environment
Moodle, classroom
Contents
SI-units
Basics of mechanics
Heat and energy
Force and vectors
Efficiency
Assessment criteria
Exercises and exam
Assessment scale
1-5
Enrollment
15.05.2023 - 01.09.2023
Timing
04.09.2023 - 31.12.2023
Number of ECTS credits allocated
3 op
Virtual portion
3 op
Mode of delivery
Distance learning
Unit
Faculty of Technology (LAB)
Campus
E-campus, Lahti
Teaching languages
- Finnish
Seats
0 - 150
Degree programmes
- Bachelor’s Degree Programme in Wood Technology (in Finnish)
Teachers
- Tiina Valkonen
Scheduling groups
- Verkkoluento (Size: 0. Open UAS: 0.)
Groups
-
TLTIPUU23KV
Small groups
- Verkkoluento 1
Learning outcomes
Student is able to
- understand the purpose of the physics in technology
- describe and utilize the SI-unit system and implement
- solve mathematical problems in kinematics, mechanics and thermodynamics
- utilize vectors
Implementation and methods of teaching
Lectures, videos, exercises
Learning material and recommended literature
The pages in Moodle
Learning environment
Moodle, Zoom
Contents
SI-units
Basics of mechanics
Heat and energy
Force and vectors
Efficiency
Assessment criteria
Exercises and exam
Assessment scale
1-5
Enrollment
15.05.2023 - 01.09.2023
Timing
04.09.2023 - 15.12.2023
Number of ECTS credits allocated
3 op
Mode of delivery
Contact teaching
Unit
Faculty of Technology (LAB)
Campus
Lahti Campus
Teaching languages
- Finnish
Seats
0 - 70
Degree programmes
- Bachelor’s Degree Programme in Electrical and Automation Engineering (in Finnish)
- Bachelor's Degree Programme in Civil and Construction Engineering, Urban Planning (in Finnish), (2022, 2023)
Teachers
- Juha Pere
Scheduling groups
- Luennot (Size: 0. Open UAS: 0.)
Groups
-
TLTISAT23S
-
TLTIYKS23S
Small groups
- Luennot 1
Learning outcomes
Student is able to
- understand the purpose of the physics in technology
- describe and utilize the SI-unit system and implement
- solve mathematical problems in kinematics, mechanics and thermodynamics
- utilize vectors
Implementation and methods of teaching
Lectures, exercises, Moodle pages
Learning material and recommended literature
The pages in Moodle
Learning environment
Moodle, classroom
Contents
SI-units
Basics of mechanics
Heat and energy
Force and vectors
Efficiency
Assessment criteria
Exercises and exam
Assessment scale
1-5
Enrollment
15.05.2023 - 01.09.2023
Timing
04.09.2023 - 15.12.2023
Number of ECTS credits allocated
3 op
Virtual portion
3 op
Mode of delivery
Distance learning
Unit
Faculty of Technology (LAB)
Campus
E-campus, Lahti
Teaching languages
- Finnish
Degree programmes
- Bachelor's Degree Programme in Information Technology (in Finnish)
Teachers
- Tommi Veijalainen
Scheduling groups
- Luennot 1 (Size: 0. Open UAS: 0.)
Groups
-
TLTITVT23SV
Small groups
- Luennot 1
Learning outcomes
Student is able to
- understand the purpose of the physics in technology
- describe and utilize the SI-unit system and implement
- solve mathematical problems in kinematics, mechanics and thermodynamics
- utilize vectors
Assessment scale
1-5
Enrollment
15.05.2023 - 01.09.2023
Timing
01.08.2023 - 31.12.2023
Number of ECTS credits allocated
3 op
Mode of delivery
Contact teaching
Unit
Faculty of Technology (LAB)
Campus
Lappeenranta Campus
Teaching languages
- Finnish
Degree programmes
- Bachelor's Degree Programme in Civil and Construction Engineering, Construction Engineering (in Finnish), (2021, 2022, 2023)
- Bachelor's Degree Programme in Civil and Construction Engineering, Infrastructure Engineering (in Finnish), (2022, 2023)
Teachers
- Petteri Karkkulainen
Scheduling groups
- Luennot 1 (Size: 0. Open UAS: 0.)
Groups
-
TLPRINFRA23S
-
TLPRTRT23S
Small groups
- Luennot 1
Learning outcomes
Student is able to
- understand the purpose of the physics in technology
- describe and utilize the SI-unit system and implement
- solve mathematical problems in kinematics, mechanics and thermodynamics
- utilize vectors
Assessment scale
1-5
Enrollment
13.03.2023 - 31.05.2023
Timing
01.05.2023 - 31.07.2023
Number of ECTS credits allocated
3 op
Virtual portion
3 op
Mode of delivery
Distance learning
Unit
Faculty of Technology (LAB)
Campus
E-campus
Teaching languages
- Finnish
Seats
0 - 500
Degree programmes
- Summer studies (in Finnish)
Teachers
- Juha Pere
Groups
-
LABKES23KH
Learning outcomes
Student is able to
- understand the purpose of the physics in technology
- describe and utilize the SI-unit system and implement
- solve mathematical problems in kinematics, mechanics and thermodynamics
- utilize vectors
Implementation and methods of teaching
videos, exercises
Learning material and recommended literature
The pages in Moodle
Learning environment
Moodle
Contents
SI-units
Basics of mechanics
Heat and energy
Force and vectors
Efficiency
Additional information for students: previous knowledge etc.
Tekniikan fysiikan perusteet AT00BT70
Basic Studies in Physics AT00CH50
are the same course. You cannot have the both of them.
Assessment scale
1-5
Enrollment
21.11.2022 - 15.01.2023
Timing
09.01.2023 - 31.05.2023
Number of ECTS credits allocated
3 op
Virtual portion
3 op
Mode of delivery
Distance learning
Unit
Faculty of Technology (LAB)
Campus
E-campus
Teaching languages
- Finnish
Seats
5 - 300
Degree programmes
- Bachelor's Degree Programme in Mechanical Engineering (in Finnish)
- Bachelor’s Degree Programme in Environmental Engineering (in Finnish)
Teachers
- Tiina Valkonen
Scheduling groups
- Verkkoluento (Size: 0. Open UAS: 0.)
Groups
-
TLTIENTEC23KM
-
TLTIKONE23KV
Small groups
- Verkkoluento
Learning outcomes
Student is able to
- understand the purpose of the physics in technology
- describe and utilize the SI-unit system and implement
- solve mathematical problems in kinematics, mechanics and thermodynamics
- utilize vectors
Implementation and methods of teaching
Lectures, videos, exercises
Learning material and recommended literature
The pages in Moodle
Learning environment
Moodle, Zoom
Contents
SI-units
Basics of mechanics
Heat and energy
Force and vectors
Efficiency
Assessment criteria
Exercises and exam
Assessment scale
1-5
Enrollment
21.11.2022 - 15.01.2023
Timing
09.01.2023 - 31.05.2023
Number of ECTS credits allocated
3 op
Virtual portion
3 op
Mode of delivery
Distance learning
Unit
Faculty of Technology (LAB)
Campus
E-campus, Lappeenranta
Teaching languages
- Finnish
Seats
5 - 100
Degree programmes
- Bachelor’s Degree Programme in Electrical and Automation Engineering (in Finnish)
Teachers
- Tiina Valkonen
Scheduling groups
- Verkkoluento (Size: 0. Open UAS: 0.)
Groups
-
TLPRSAT23KM
Small groups
- Verkkoluento
Learning outcomes
Student is able to
- understand the purpose of the physics in technology
- describe and utilize the SI-unit system and implement
- solve mathematical problems in kinematics, mechanics and thermodynamics
- utilize vectors
Implementation and methods of teaching
Lectures, videos, exercises
Learning material and recommended literature
The pages in Moodle
Learning environment
Moodle, Zoom
Contents
SI-units
Basics of mechanics
Heat and energy
Force and vectors
Efficiency
Assessment criteria
Exercises and exam
Assessment scale
1-5
Enrollment
21.11.2022 - 08.01.2023
Timing
09.01.2023 - 31.05.2023
Number of ECTS credits allocated
3 op
Mode of delivery
Contact teaching
Unit
Faculty of Technology (LAB)
Campus
Lahti Campus
Teaching languages
- Finnish
Seats
0 - 40
Degree programmes
- Bachelor’s Degree Programme in Wood Technology (in Finnish)
Teachers
- Juha Pere
Scheduling groups
- Harjoitukset 1 (Size: 0. Open UAS: 0.)
Groups
-
TLTIPUU22S
Small groups
- Harjoitukset 1
Learning outcomes
Student is able to
- understand the purpose of the physics in technology
- describe and utilize the SI-unit system and implement
- solve mathematical problems in kinematics, mechanics and thermodynamics
- utilize vectors
Implementation and methods of teaching
Lectures, videos, exercises
Learning material and recommended literature
The pages in Moodle
Learning environment
Moodle, Zoom, classroom
Contents
SI-units
Basics of mechanics
Heat and energy
Force and vectors
Efficiency
Assessment criteria
Exercises and exam
Assessment scale
1-5
Enrollment
21.11.2022 - 15.01.2023
Timing
01.01.2023 - 31.07.2023
Number of ECTS credits allocated
3 op
Virtual portion
3 op
Mode of delivery
Distance learning
Unit
Faculty of Technology (LAB)
Campus
Lahti Campus
Teaching languages
- Finnish
Degree programmes
- Bachelor's Degree Programme in Information Technology (in Finnish)
Teachers
- Tommi Veijalainen
Scheduling groups
- Luennot 1 (Size: 500. Open UAS: 0.)
Groups
-
TLTITVT23KM
Small groups
- Luennot 1
Learning outcomes
Student is able to
- understand the purpose of the physics in technology
- describe and utilize the SI-unit system and implement
- solve mathematical problems in kinematics, mechanics and thermodynamics
- utilize vectors
Assessment scale
1-5
Enrollment
01.07.2022 - 04.09.2022
Timing
05.09.2022 - 16.12.2022
Number of ECTS credits allocated
3 op
Virtual portion
2 op
Mode of delivery
34 % Contact teaching, 66 % Distance learning
Unit
Faculty of Technology (LAB)
Campus
Lahti Campus
Teaching languages
- Finnish
Seats
0 - 60
Degree programmes
- Bachelor’s Degree Programme in Wood Technology (in Finnish)
Teachers
- Tiina Valkonen
Scheduling groups
- Harjoitukset 1 (Size: 0. Open UAS: 0.)
Groups
-
TLTIPUU22KM
Small groups
- Harjoitukset 1
Learning outcomes
Student is able to
- understand the purpose of the physics in technology
- describe and utilize the SI-unit system and implement
- solve mathematical problems in kinematics, mechanics and thermodynamics
- utilize vectors
Implementation and methods of teaching
Lectures, videos, exercises
Learning material and recommended literature
The pages in Moodle
Learning environment
Moodle, Zoom
Contents
SI-units
Basics of mechanics
Heat and energy
Force and vectors
Efficiency
Assessment criteria
Exercises and exam
Assessment scale
1-5
Enrollment
01.07.2022 - 04.09.2022
Timing
05.09.2022 - 16.12.2022
Number of ECTS credits allocated
3 op
Virtual portion
1 op
Mode of delivery
67 % Contact teaching, 33 % Distance learning
Unit
Faculty of Technology (LAB)
Campus
Lahti Campus
Teaching languages
- Finnish
Seats
0 - 80
Degree programmes
- Bachelor's Degree Programme in Mechanical Engineering (in Finnish)
Teachers
- Tiina Valkonen
Scheduling groups
- Harjoitukset 1 (Size: 0. Open UAS: 0.)
Groups
-
TLTIKONE22S
Small groups
- Harjoitukset 1
Learning outcomes
Student is able to
- understand the purpose of the physics in technology
- describe and utilize the SI-unit system and implement
- solve mathematical problems in kinematics, mechanics and thermodynamics
- utilize vectors
Implementation and methods of teaching
Lectures, videos, exercises
Learning material and recommended literature
The pages in Moodle
Learning environment
Moodle, Zoom, classroom
Contents
SI-units
Basics of mechanics
Heat and energy
Force and vectors
Efficiency
Assessment criteria
Exercises and exam
Assessment scale
1-5
Enrollment
01.07.2022 - 04.09.2022
Timing
05.09.2022 - 16.12.2022
Number of ECTS credits allocated
3 op
Virtual portion
1 op
Mode of delivery
67 % Contact teaching, 33 % Distance learning
Unit
Faculty of Technology (LAB)
Campus
Lahti Campus
Teaching languages
- Finnish
Seats
0 - 60
Degree programmes
- Bachelor's Degree Programme in Civil and Construction Engineering, Urban Planning (in Finnish), (2022, 2023)
Teachers
- Tiina Valkonen
Scheduling groups
- Harjoitukset 1 (Size: 0. Open UAS: 0.)
Groups
-
TLTIYKS22S
Small groups
- Harjoitukset 1
Learning outcomes
Student is able to
- understand the purpose of the physics in technology
- describe and utilize the SI-unit system and implement
- solve mathematical problems in kinematics, mechanics and thermodynamics
- utilize vectors
Implementation and methods of teaching
Lectures, videos, exercises
Learning material and recommended literature
The pages in Moodle
Learning environment
Moodle, Zoom, classroom
Contents
SI-units
Basics of mechanics
Heat and energy
Force and vectors
Efficiency
Assessment criteria
Exercises and exam
Assessment scale
1-5
Enrollment
01.07.2022 - 04.09.2022
Timing
29.08.2022 - 16.12.2022
Number of ECTS credits allocated
3 op
Mode of delivery
Contact teaching
Unit
Faculty of Technology (LAB)
Campus
E-campus, Lahti
Teaching languages
- Finnish
Degree programmes
- Bachelor's Degree Programme in Information Technology (in Finnish)
Teachers
- Tommi Veijalainen
- Juha Hyytiäinen
Scheduling groups
- Luennot 1 (Size: 200. Open UAS: 0.)
Groups
-
TLTITVT22SV
Small groups
- Luennot 1
Learning outcomes
Student is able to
- understand the purpose of the physics in technology
- describe and utilize the SI-unit system and implement
- solve mathematical problems in kinematics, mechanics and thermodynamics
- utilize vectors
Assessment scale
1-5
Enrollment
01.07.2022 - 04.09.2022
Timing
29.08.2022 - 16.12.2022
Number of ECTS credits allocated
3 op
Mode of delivery
Contact teaching
Unit
Faculty of Technology (LAB)
Campus
Lappeenranta Campus
Teaching languages
- Finnish
Degree programmes
- Bachelor's Degree Programme in Mechanical Engineering (in Finnish)
Teachers
- Petteri Karkkulainen
Scheduling groups
- Luennot (Size: 0. Open UAS: 0.)
Groups
-
TLPRKONE22S
Small groups
- Luennot 1
Learning outcomes
Student is able to
- understand the purpose of the physics in technology
- describe and utilize the SI-unit system and implement
- solve mathematical problems in kinematics, mechanics and thermodynamics
- utilize vectors
Assessment scale
1-5
Enrollment
01.07.2022 - 04.09.2022
Timing
01.08.2022 - 31.12.2022
Number of ECTS credits allocated
3 op
Mode of delivery
Contact teaching
Unit
Faculty of Technology (LAB)
Campus
Lappeenranta Campus
Teaching languages
- Finnish
Degree programmes
- Bachelor's Degree Programme in Civil and Construction Engineering, Construction Engineering (in Finnish), (2021, 2022, 2023)
- Bachelor's Degree Programme in Civil and Construction Engineering, Infrastructure Engineering (in Finnish), (2022, 2023)
Teachers
- Petteri Karkkulainen
Scheduling groups
- Luennot (Size: 0. Open UAS: 0.)
- Harjoitukset (Size: 0. Open UAS: 0.)
Groups
-
TLPRINFRA22S
-
TLPRTRT22S
Small groups
- Luennot 1
- Harjoitukset 1
Learning outcomes
Student is able to
- understand the purpose of the physics in technology
- describe and utilize the SI-unit system and implement
- solve mathematical problems in kinematics, mechanics and thermodynamics
- utilize vectors
Assessment scale
1-5
Enrollment
14.03.2022 - 31.05.2022
Timing
09.05.2022 - 31.07.2022
Number of ECTS credits allocated
3 op
Virtual portion
3 op
Mode of delivery
Distance learning
Unit
Faculty of Technology (LAB)
Campus
E-campus
Teaching languages
- Finnish
Seats
0 - 500
Degree programmes
- Summer studies (in Finnish)
Teachers
- Juha Pere
Groups
-
LABLPRKES22KH
-
LABLTIKES22KH
Learning outcomes
Student is able to
- understand the purpose of the physics in technology
- describe and utilize the SI-unit system and implement
- solve mathematical problems in kinematics, mechanics and thermodynamics
- utilize vectors
Implementation and methods of teaching
videos, exercises
Learning material and recommended literature
The pages in Moodle
Learning environment
Moodle
Contents
SI-units
Basics of mechanics
Heat and energy
Force and vectors
Efficiency
Additional information for students: previous knowledge etc.
Tekniikan fysiikan perusteet AT00BT70
Basic Studies in Physics AT00CH50
are the same course. You cannot have the both of them.
Assessment scale
1-5
Enrollment
22.11.2021 - 14.01.2022
Timing
10.01.2022 - 31.05.2022
Number of ECTS credits allocated
3 op
Virtual portion
3 op
Mode of delivery
Distance learning
Unit
Faculty of Technology (LAB)
Campus
Lahti Campus
Teaching languages
- Finnish
Seats
0 - 150
Degree programmes
- Bachelor's Degree Programme in Mechanical Engineering (in Finnish)
Teachers
- Juha Pere
Scheduling groups
- Toteutuksen opetusryhmä 1 (Size: 0. Open UAS: 0.)
Groups
-
TLTIKONE22KM
Small groups
- Toteutuksen opetusryhmä 1
Learning outcomes
Student is able to
- understand the purpose of the physics in technology
- describe and utilize the SI-unit system and implement
- solve mathematical problems in kinematics, mechanics and thermodynamics
- utilize vectors
Implementation and methods of teaching
Lectures, videos, exercises
Learning material and recommended literature
The pages in Moodle
Learning environment
Moodle, Zoom
Contents
SI-units
Basics of mechanics
Heat and energy
Force and vectors
Efficiency
Assessment criteria
Exercises and exam
Assessment scale
1-5
Enrollment
22.11.2021 - 14.01.2022
Timing
10.01.2022 - 31.05.2022
Number of ECTS credits allocated
3 op
Virtual portion
2 op
Mode of delivery
34 % Contact teaching, 66 % Distance learning
Unit
Faculty of Technology (LAB)
Campus
Lahti Campus
Teaching languages
- Finnish
Seats
0 - 70
Degree programmes
- Bachelor’s Degree Programme in Environmental Engineering (in Finnish)
Teachers
- Juha Pere
Scheduling groups
- Toteutuksen opetusryhmä 1 (Size: 0. Open UAS: 0.)
Groups
-
TLTIENTEC22KM
Small groups
- Toteutuksen opetusryhmä 1
Learning outcomes
Student is able to
- understand the purpose of the physics in technology
- describe and utilize the SI-unit system and implement
- solve mathematical problems in kinematics, mechanics and thermodynamics
- utilize vectors
Implementation and methods of teaching
Lectures, videos, exercises
Learning material and recommended literature
The pages in Moodle
Learning environment
Moodle, Zoom
Contents
SI-units
Basics of mechanics
Heat and energy
Force and vectors
Efficiency
Assessment scale
1-5
Enrollment
19.11.2021 - 09.01.2022
Timing
01.01.2022 - 01.05.2022
Number of ECTS credits allocated
3 op
Mode of delivery
Contact teaching
Unit
Faculty of Technology (LAB)
Campus
Lahti Campus
Teaching languages
- Finnish
Degree programmes
- Bachelor's Degree Programme in Information Technology (in Finnish)
Teachers
- Tommi Veijalainen
- Juha Hyytiäinen
Scheduling groups
- Info 1 (Size: 0. Open UAS: 0.)
Groups
-
TLTITVT22K
Small groups
- Info 1
Learning outcomes
Student is able to
- understand the purpose of the physics in technology
- describe and utilize the SI-unit system and implement
- solve mathematical problems in kinematics, mechanics and thermodynamics
- utilize vectors
Assessment scale
1-5
Enrollment
19.11.2021 - 09.01.2022
Timing
01.01.2022 - 31.05.2022
Number of ECTS credits allocated
3 op
Virtual portion
1 op
Mode of delivery
67 % Contact teaching, 33 % Distance learning
Unit
Faculty of Technology (LAB)
Campus
Lahti Campus
Teaching languages
- Finnish
Seats
0 - 50
Degree programmes
- Bachelor’s Degree Programme in Wood Technology (in Finnish)
Teachers
- Juha Pere
Scheduling groups
- Toteutuksen opetusryhmä 1 (Size: 0. Open UAS: 0.)
Groups
-
TLTIPUU21S
Small groups
- Toteutuksen opetusryhmä 1
Learning outcomes
Student is able to
- understand the purpose of the physics in technology
- describe and utilize the SI-unit system and implement
- solve mathematical problems in kinematics, mechanics and thermodynamics
- utilize vectors
Implementation and methods of teaching
Lectures, videos, exercises
Learning material and recommended literature
The pages in Moodle
Learning environment
Moodle, Zoom, classroom
Contents
SI-units
Basics of mechanics
Heat and energy
Force and vectors
Efficiency
Assessment criteria
Exercises and exam
Assessment scale
1-5