Working in CADLaajuus (5 cr)
Code: AM00CM66
Credits
5 op
Teaching language
- Finnish
Objective
The student is able to
- perform basic workflows using industry standard CAD software and is able to use basic terminology of CAD work
- independently use CAD software as a design tool
- create work drawings using CAD software.
Enrollment
06.05.2024 - 30.08.2024
Timing
26.08.2024 - 16.12.2024
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Unit
Institute of Design and Fine Arts (LAB)
Campus
Lahti Campus
Teaching languages
- Finnish
Degree programmes
- Bachelor’s Degree Programme in Industrial and Brand Design (in Finnish), (2017, 2018, 2019)
- Bachelor’s Degree Programme in Interior Architecture and Furniture Design (in Finnish)
- Complementary competence, Bachelor's (in Finnish)
Teachers
- Olli Seppälä
Teacher in charge
Tero Leponiemi
Scheduling groups
- Harjoitukset 1 (Size: 0. Open UAS: 0.)
Groups
-
MLTIPAL23S
Small groups
- Practice 1
Learning outcomes
The student is able to
- perform basic workflows using industry standard CAD software and is able to use basic terminology of CAD work
- independently use CAD software as a design tool
- create work drawings using CAD software.
Assessment scale
1-5
Enrollment
20.11.2023 - 05.01.2024
Timing
01.01.2024 - 31.07.2024
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Unit
Institute of Design and Fine Arts (LAB)
Campus
Lahti Campus
Teaching languages
- Finnish
Degree programmes
- Bachelor’s Degree Programme in Industrial and Brand Design (in Finnish), (2017, 2018, 2019)
- Bachelor’s Degree Programme in Interior Architecture and Furniture Design (in Finnish)
- Complementary competence, Bachelor's (in Finnish)
Teachers
- Kari Metso
Scheduling groups
- Luennot (Size: 0. Open UAS: 0.)
Groups
-
MLTITEMU23S
Small groups
- Lecture 1
Learning outcomes
The student is able to
- perform basic workflows using industry standard CAD software and is able to use basic terminology of CAD work
- independently use CAD software as a design tool
- create work drawings using CAD software.
Assessment scale
1-5
Enrollment
20.11.2023 - 05.01.2024
Timing
01.01.2024 - 31.07.2024
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Unit
Institute of Design and Fine Arts (LAB)
Campus
Lahti Campus
Teaching languages
- Finnish
Degree programmes
- Bachelor’s Degree Programme in Industrial and Brand Design (in Finnish), (2017, 2018, 2019)
- Bachelor’s Degree Programme in Interior Architecture and Furniture Design (in Finnish)
- Complementary competence, Bachelor's (in Finnish)
Teachers
- Kimmo Liimatainen
Teacher in charge
Tero Leponiemi
Scheduling groups
- Harjoitukset (Size: 0. Open UAS: 0.)
Groups
-
MLTISIK23S
-
MLTIPAL23K
Small groups
- Practice 1
Learning outcomes
The student is able to
- perform basic workflows using industry standard CAD software and is able to use basic terminology of CAD work
- independently use CAD software as a design tool
- create work drawings using CAD software.
Assessment scale
1-5
Failed (0)
- Repeated absences from lessons and teaching situations
- Poor knowledge of the professional knowledge and skills relevant to the course
- Absence of key course assignments
Assessment criteria: level 1 (assessment scale 1–5)
- Ability to work according to instructions
- Can generate ideas for the implementation of the assignment
- Can identify and describe the main methods of the course in a guided manner
- Participates in a guided learning discussion
- Can search for professional information in his/her field
Assessment criteria: level 3 (assessment scale 1–5)
- Is able to apply a wide range of options to his/her working process
- Can implement assignments in a guided and independent manner on the basis of their ideas and develop them on the basis of feedback
- Can independently identify and compare the methods used
- Can assess and justify competence and set objectives for development in terms of content and/or technology
- Able to follow and describe the professional debate in his/her field
Assessment criteria: level 5 (assessment scale 1–5)
- Can apply and develop a variety of options in their working process
- Can use what they have learned in a planned and creative way when carrying out assignments and apply feedback received
- Can apply the methods used and analyse their relationship to the task
- Able to assess, develop and extend content and/or technical competences
- Able to participate in professional debates in his/her field
Enrollment
15.05.2023 - 01.09.2023
Timing
28.08.2023 - 31.12.2023
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Unit
Institute of Design and Fine Arts (LAB)
Campus
Lahti Campus
Teaching languages
- Finnish
Degree programmes
- Bachelor’s Degree Programme in Industrial and Brand Design (in Finnish), (2017, 2018, 2019)
- Bachelor’s Degree Programme in Interior Architecture and Furniture Design (in Finnish)
- Complementary competence, Bachelor's (in Finnish)
Teachers
- Olli Seppälä
Scheduling groups
- Luennot (Size: 0. Open UAS: 0.)
Groups
-
MLTIPAL22S
Small groups
- Lecture
Learning outcomes
The student is able to
- perform basic workflows using industry standard CAD software and is able to use basic terminology of CAD work
- independently use CAD software as a design tool
- create work drawings using CAD software.
Implementation and methods of teaching
The course will be completed individually as an online course. During the course there are days for personal guidance and peer tutoring in class rooms and zoom to ensure everyones progress in the course.
Timing and attendance
Autumn 2023
Learning material and recommended literature
Materials of the online course are located on Moodle.
Alternative completion methods
- Possibility of acceptance with alternative studies and portfolio content that verify student's knowledge and skills of the topic
Working life cooperation
- no worklife cooperation
Exam retakes
- Possibility to renew the course in the next possible similar course
Learning environment
- Moodle
- Computer class
- Personal remote working
- Zoom
Student time use and work load
-
Additional information for students: previous knowledge etc.
No requirements for previous skills
Assessment criteria
Online course
Assessment scale
Approved/Failed
Assessment criteria: assessment scale failed/approved
Accepted
Student has returned his/her assignment in time
Rejected
Student hasn't returned his/her assignment in time
Enrollment
15.05.2023 - 01.09.2023
Timing
01.08.2023 - 31.12.2023
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Unit
Institute of Design and Fine Arts (LAB)
Campus
Lahti Campus
Teaching languages
- Finnish
Seats
15 - 20
Degree programmes
- Bachelor’s Degree Programme in Industrial and Brand Design (in Finnish), (2017, 2018, 2019)
- Bachelor’s Degree Programme in Interior Architecture and Furniture Design (in Finnish)
- Complementary competence, Bachelor's (in Finnish)
Teachers
- Timo Sulkamo
- LAB_virtuaaliopettaja_SIK_01
Scheduling groups
- Luennot (Size: 0. Open UAS: 0.)
Groups
-
MLTISIK23K
Small groups
- Luennot 1
Learning outcomes
The student is able to
- perform basic workflows using industry standard CAD software and is able to use basic terminology of CAD work
- independently use CAD software as a design tool
- create work drawings using CAD software.
Assessment scale
Approved/Failed
Enrollment
21.11.2022 - 08.01.2023
Timing
06.03.2023 - 31.07.2023
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Unit
Institute of Design and Fine Arts (LAB)
Campus
Lahti Campus
Teaching languages
- Finnish
Degree programmes
- Bachelor’s Degree Programme in Industrial and Brand Design (in Finnish), (2017, 2018, 2019)
- Bachelor’s Degree Programme in Interior Architecture and Furniture Design (in Finnish)
- Complementary competence, Bachelor's (in Finnish)
Teachers
- Olli Seppälä
Scheduling groups
- Harjoitukset 1 (Size: 0. Open UAS: 0.)
Groups
-
MLTIPAL22K
Small groups
- Harjoitukset 1
Learning outcomes
The student is able to
- perform basic workflows using industry standard CAD software and is able to use basic terminology of CAD work
- independently use CAD software as a design tool
- create work drawings using CAD software.
Assessment scale
1-5
Enrollment
21.11.2022 - 08.01.2023
Timing
01.01.2023 - 31.05.2023
Number of ECTS credits allocated
5 op
Virtual portion
5 op
Mode of delivery
Distance learning
Unit
Institute of Design and Fine Arts (LAB)
Campus
Lahti Campus
Teaching languages
- Finnish
Degree programmes
- Bachelor’s Degree Programme in Industrial and Brand Design (in Finnish), (2017, 2018, 2019)
- Bachelor’s Degree Programme in Interior Architecture and Furniture Design (in Finnish)
- Complementary competence, Bachelor's (in Finnish)
Teachers
- Timo Sulkamo
Scheduling groups
- Luennot (Size: 0. Open UAS: 0.)
Groups
-
MLTISIK22S
Small groups
- Luennot 1
Learning outcomes
The student is able to
- perform basic workflows using industry standard CAD software and is able to use basic terminology of CAD work
- independently use CAD software as a design tool
- create work drawings using CAD software.
Assessment scale
Approved/Failed
Enrollment
21.11.2022 - 08.01.2023
Timing
01.01.2023 - 31.05.2023
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Unit
Institute of Design and Fine Arts (LAB)
Campus
Lahti Campus
Teaching languages
- Finnish
Degree programmes
- Bachelor’s Degree Programme in Industrial and Brand Design (in Finnish), (2017, 2018, 2019)
- Bachelor’s Degree Programme in Interior Architecture and Furniture Design (in Finnish)
- Complementary competence, Bachelor's (in Finnish)
Teachers
- Kari Metso
Scheduling groups
- Luennot (Size: 0. Open UAS: 0.)
Groups
-
MLTITEMU22S
Small groups
- Luennot 1
Learning outcomes
The student is able to
- perform basic workflows using industry standard CAD software and is able to use basic terminology of CAD work
- independently use CAD software as a design tool
- create work drawings using CAD software.
Assessment scale
1-5
Enrollment
01.07.2022 - 04.09.2022
Timing
04.09.2022 - 31.12.2022
Number of ECTS credits allocated
5 op
Virtual portion
5 op
Mode of delivery
Distance learning
Unit
Institute of Design and Fine Arts (LAB)
Campus
Lahti Campus
Teaching languages
- Finnish
Degree programmes
- Bachelor’s Degree Programme in Industrial and Brand Design (in Finnish), (2017, 2018, 2019)
- Bachelor’s Degree Programme in Interior Architecture and Furniture Design (in Finnish)
- Complementary competence, Bachelor's (in Finnish)
Teachers
- Timo Sulkamo
Teacher in charge
Anu Akkanen
Scheduling groups
- Luennot (Size: 0. Open UAS: 0.)
Groups
-
MLTISIK22K
Small groups
- Luennot 1
Learning outcomes
The student is able to
- perform basic workflows using industry standard CAD software and is able to use basic terminology of CAD work
- independently use CAD software as a design tool
- create work drawings using CAD software.
Assessment scale
Approved/Failed
Enrollment
01.07.2022 - 04.09.2022
Timing
29.08.2022 - 31.12.2022
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Unit
Institute of Design and Fine Arts (LAB)
Campus
Lahti Campus
Teaching languages
- Finnish
Degree programmes
- Bachelor’s Degree Programme in Industrial and Brand Design (in Finnish), (2017, 2018, 2019)
- Bachelor’s Degree Programme in Interior Architecture and Furniture Design (in Finnish)
- Complementary competence, Bachelor's (in Finnish)
Teachers
- Roosa Ihalainen
- Tero Leponiemi
Teacher in charge
Jorma Lehtonen
Groups
-
MLTIPAL21S
Learning outcomes
The student is able to
- perform basic workflows using industry standard CAD software and is able to use basic terminology of CAD work
- independently use CAD software as a design tool
- create work drawings using CAD software.
Assessment scale
1-5
Enrollment
19.11.2021 - 09.01.2022
Timing
07.03.2022 - 06.05.2022
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Unit
Institute of Design and Fine Arts (LAB)
Campus
Lahti Campus
Teaching languages
- Finnish
Degree programmes
- Bachelor’s Degree Programme in Industrial and Brand Design (in Finnish), (2017, 2018, 2019)
- Bachelor’s Degree Programme in Interior Architecture and Furniture Design (in Finnish)
- Complementary competence, Bachelor's (in Finnish)
Teachers
- Roosa Ihalainen
- MI_opettaja_MUO, Muotoilu Virtuaaliopettaja (LAB)
Scheduling groups
- ArchiCAD (Size: 0. Open UAS: 0.)
Groups
-
MLTISIK21S
Small groups
- ArchiCAD
Learning outcomes
The student is able to
- perform basic workflows using industry standard CAD software and is able to use basic terminology of CAD work
- independently use CAD software as a design tool
- create work drawings using CAD software.
Assessment scale
1-5
Enrollment
19.11.2021 - 09.01.2022
Timing
01.01.2022 - 30.05.2022
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Unit
Institute of Design and Fine Arts (LAB)
Campus
Lahti Campus
Teaching languages
- Finnish
Degree programmes
- Bachelor’s Degree Programme in Industrial and Brand Design (in Finnish), (2017, 2018, 2019)
- Bachelor’s Degree Programme in Interior Architecture and Furniture Design (in Finnish)
- Complementary competence, Bachelor's (in Finnish)
Teachers
- Kari Metso
Scheduling groups
- Luennot (Size: 0. Open UAS: 0.)
Groups
-
MLTITEMU21S
Small groups
- Luennot 1
Learning outcomes
The student is able to
- perform basic workflows using industry standard CAD software and is able to use basic terminology of CAD work
- independently use CAD software as a design tool
- create work drawings using CAD software.
Assessment scale
1-5