Study Guide

Learning outcomes

The student is able to:
- present the results or output of their thesis
- report on their thesis in writing in accordance with the thesis guidelines of LAB University of Applied Sciences
- write a maturity test.

Implementation and methods of teaching

• Finishing the job. Summary and evaluation seminars. Participation in an exhibition.

Learning material and recommended literature

• Lab thesis manual.

Alternative completion methods

• In exceptional cases, this will be agreed with the supervising teachers.

Working life cooperation

• Individual theses may be carried out in cooperation with working life partners. The construction of an exhibition may also involve cooperation with the working world.

Learning environment

• Campus, showrooms.

Student time use and work load

• The thesis design component is 5 credits, equivalent to approximately 135 hours of student work (one credit 27 hours).

Contents

• At this stage of the course, the thesis has progressed to the finalisation and publication stage.
In the synthesis seminar, permission will be given to participate in the public evaluation.

The written part will be finalised, used in Turnitin and submitted to the assessors. The artwork will be finalised for the exhibition and, in the case of a dummy for a photo book, for example, will be submitted to the evaluators. The judges will have access to the exhibition work in advance in the form of a pdf of the photo booklet that will be sent to them.

Each student will be involved in the construction of the exhibition, its publicity, etc.

One or more external assessors will be invited to the assessment session. The teachers who supervised the work in the seminars will also take part in the evaluation. The communication teachers will give a written opinion on the written part of the work.'

The student uploads the completed, assessed and approved work to Theseus.
Students will take the maturity test as informed by the supervising teacher.

Additional information for students: previous knowledge etc.

• Design and implementation of the thesis.

Assessment criteria

• The evaluation of the completed thesis is based on the evaluation table in the Lab thesis guidelines.

Assessment scale

1-5

Failed (0)

• The evaluation of the completed thesis is based on the evaluation table in the Lab thesis guidelines.

Assessment criteria: level 1 (assessment scale 1–5)

• The evaluation of the completed thesis is based on the evaluation table in the Lab thesis guidelines.

Assessment criteria: level 3 (assessment scale 1–5)

• The evaluation of the completed thesis is based on the evaluation table in the Lab thesis guidelines.

Assessment criteria: level 5 (assessment scale 1–5)

• The evaluation of the completed thesis is based on the evaluation table in the Lab thesis guidelines.

Learning outcomes

The student is able to:
- present the results or output of their thesis
- report on their thesis in writing in accordance with the thesis guidelines of LAB University of Applied Sciences
- write a maturity test.

Implementation and methods of teaching

• Finishing the job. Summary and evaluation seminars. Participation in an exhibition.

Learning material and recommended literature

• Lab thesis manual.

Alternative completion methods

• In exceptional cases, this will be agreed with the supervising teachers.

Working life cooperation

• Individual theses may be carried out in cooperation with working life partners. The construction of an exhibition may also involve cooperation with the working world.

Learning environment

• Campus, showrooms.

Student time use and work load

• The thesis design component is 5 credits, equivalent to approximately 135 hours of student work (one credit 27 hours).

Contents

• At this stage of the course, the thesis has progressed to the finalisation and publication stage.
In the synthesis seminar, permission will be given to participate in the public evaluation.

The written part will be finalised, used in Turnitin and submitted to the assessors. The artwork will be finalised for the exhibition and, in the case of a dummy for a photo book, for example, will be submitted to the evaluators. The judges will have access to the exhibition work in advance in the form of a pdf of the photo booklet that will be sent to them.

Each student will be involved in the construction of the exhibition, its publicity, etc.

One or more external assessors will be invited to the assessment session. The teachers who supervised the work in the seminars will also take part in the evaluation. The communication teachers will give a written opinion on the written part of the work.'

The student uploads the completed, assessed and approved work to Theseus.
Students will take the maturity test as informed by the supervising teacher.

Additional information for students: previous knowledge etc.

• Design and implementation of the thesis.

Assessment criteria

• The evaluation of the completed thesis is based on the evaluation table in the Lab thesis guidelines.

Assessment scale

1-5

Failed (0)

• The evaluation of the completed thesis is based on the evaluation table in the Lab thesis guidelines.

Assessment criteria: level 1 (assessment scale 1–5)

• The evaluation of the completed thesis is based on the evaluation table in the Lab thesis guidelines.

Assessment criteria: level 3 (assessment scale 1–5)

• The evaluation of the completed thesis is based on the evaluation table in the Lab thesis guidelines.

Assessment criteria: level 5 (assessment scale 1–5)

• The evaluation of the completed thesis is based on the evaluation table in the Lab thesis guidelines.

Learning outcomes

The student is able to:
- present the results or output of their thesis
- report on their thesis in writing in accordance with the thesis guidelines of LAB University of Applied Sciences
- write a maturity test.

Implementation and methods of teaching

• Finishing the job. Summary and evaluation seminars. Participation in an exhibition.

Learning material and recommended literature

• Lab thesis manual.

Alternative completion methods

• In exceptional cases, this will be agreed with the supervising teachers.

Working life cooperation

• Individual theses may be carried out in cooperation with working life partners. The construction of an exhibition may also involve cooperation with the working world.

Learning environment

• Campus, showrooms.

Student time use and work load

• The thesis design component is 5 credits, equivalent to approximately 135 hours of student work (one credit 27 hours).

Contents

• At this stage of the course, the thesis has progressed to the finalisation and publication stage.
In the synthesis seminar, permission will be given to participate in the public evaluation.

The written part will be finalised, used in Turnitin and submitted to the assessors. The artwork will be finalised for the exhibition and, in the case of a dummy for a photo book, for example, will be submitted to the evaluators. The judges will have access to the exhibition work in advance in the form of a pdf of the photo booklet that will be sent to them.

Each student will be involved in the construction of the exhibition, its publicity, etc.

One or more external assessors will be invited to the assessment session. The teachers who supervised the work in the seminars will also take part in the evaluation. The communication teachers will give a written opinion on the written part of the work.'

The student uploads the completed, assessed and approved work to Theseus.
Students will take the maturity test as informed by the supervising teacher.

Additional information for students: previous knowledge etc.

• Design and implementation of the thesis.

Assessment criteria

• The evaluation of the completed thesis is based on the evaluation table in the Lab thesis guidelines.

Assessment scale

1-5

Failed (0)

• The evaluation of the completed thesis is based on the evaluation table in the Lab thesis guidelines.

Assessment criteria: level 1 (assessment scale 1–5)

• The evaluation of the completed thesis is based on the evaluation table in the Lab thesis guidelines.

Assessment criteria: level 3 (assessment scale 1–5)

• The evaluation of the completed thesis is based on the evaluation table in the Lab thesis guidelines.

Assessment criteria: level 5 (assessment scale 1–5)

• The evaluation of the completed thesis is based on the evaluation table in the Lab thesis guidelines.

Learning outcomes

The student is able to:
- present the results or output of their thesis
- report on their thesis in writing in accordance with the thesis guidelines of LAB University of Applied Sciences
- write a maturity test.

Implementation and methods of teaching

• Finishing the job. Summary and evaluation seminars. Participation in an exhibition.

Learning material and recommended literature

• Lab thesis manual.

Alternative completion methods

• In exceptional cases, this will be agreed with the supervising teachers.

Working life cooperation

• Individual theses may be carried out in cooperation with working life partners. The construction of an exhibition may also involve cooperation with the working world.

Learning environment

• Campus, showrooms.

Student time use and work load

• The thesis design component is 5 credits, equivalent to approximately 135 hours of student work (one credit 27 hours).

Contents

• At this stage of the course, the thesis has progressed to the finalisation and publication stage.
In the synthesis seminar, permission will be given to participate in the public evaluation.

The written part will be finalised, used in Turnitin and submitted to the assessors. The artwork will be finalised for the exhibition and, in the case of a dummy for a photo book, for example, will be submitted to the evaluators. The judges will have access to the exhibition work in advance in the form of a pdf of the photo booklet that will be sent to them.

Each student will be involved in the construction of the exhibition, its publicity, etc.

One or more external assessors will be invited to the assessment session. The teachers who supervised the work in the seminars will also take part in the evaluation. The communication teachers will give a written opinion on the written part of the work.'

The student uploads the completed, assessed and approved work to Theseus.
Students will take the maturity test as informed by the supervising teacher.

Additional information for students: previous knowledge etc.

• Design and implementation of the thesis.

Assessment criteria

• The evaluation of the completed thesis is based on the evaluation table in the Lab thesis guidelines.

Assessment scale

1-5

Failed (0)

• The evaluation of the completed thesis is based on the evaluation table in the Lab thesis guidelines.

Assessment criteria: level 1 (assessment scale 1–5)

• The evaluation of the completed thesis is based on the evaluation table in the Lab thesis guidelines.

Assessment criteria: level 3 (assessment scale 1–5)

• The evaluation of the completed thesis is based on the evaluation table in the Lab thesis guidelines.

Assessment criteria: level 5 (assessment scale 1–5)

• The evaluation of the completed thesis is based on the evaluation table in the Lab thesis guidelines.

Learning outcomes

The student is able to:
- present the results or output of their thesis
- report on their thesis in writing in accordance with the thesis guidelines of LAB University of Applied Sciences
- write a maturity test.

Implementation and methods of teaching

PUBLICATION SEMINARS: APRIL/MAY

Finalising the thesis result, finalising the report and finalising the presentation at the publication seminar and the maturity essay.

Return of the final written report to the supervisors
Publication seminar: 20 min / student + commentary 25 min

Timing and attendance

Attendance at the seminar is compulsory and must be arranged separately with the supervising teacher in the event of a disability. Individual tuition as required

Learning material and recommended literature

In the Moodle Platform for Thesis work

Working life cooperation

The thesis can be carried out in cooperation with working life or in RND - projects. The student acquires and negotiates the cooperation independently.

Assessment criteria

Pass/Fail. The final thesis is assessed according to the LAB University of Applied Sciences' thesis assessment framework:

https://elab.lab.fi/sites/default/files/category-page/2022-08/LAB_Thesis_evaluation_criteria_Bachelor_170822.pdf

Assessment scale

1-5

Learning outcomes

The student is able to:
- present the results or output of their thesis
- report on their thesis in writing in accordance with the thesis guidelines of LAB University of Applied Sciences
- write a maturity test.

Implementation and methods of teaching

• Finishing the job. Summary and evaluation seminars. Participation in an exhibition.

Learning material and recommended literature

• Lab thesis manual.

Alternative completion methods

• In exceptional cases, this will be agreed with the supervising teachers.

Working life cooperation

• Individual theses may be carried out in cooperation with working life partners. The construction of an exhibition may also involve cooperation with the working world.

Learning environment

• Campus, showrooms.

Student time use and work load

• The thesis design component is 5 credits, equivalent to approximately 135 hours of student work (one credit 27 hours).

Contents

• At this stage of the course, the thesis has progressed to the finalisation and publication stage.
In the synthesis seminar, permission will be given to participate in the public evaluation.

The written part will be finalised, used in Turnitin and submitted to the assessors. The artwork will be finalised for the exhibition and, in the case of a dummy for a photo book, for example, will be submitted to the evaluators. The judges will have access to the exhibition work in advance in the form of a pdf of the photo booklet that will be sent to them.

Each student will be involved in the construction of the exhibition, its publicity, etc.

One or more external assessors will be invited to the assessment session. The teachers who supervised the work in the seminars will also take part in the evaluation. The communication teachers will give a written opinion on the written part of the work.'

The student uploads the completed, assessed and approved work to Theseus.
Students will take the maturity test as informed by the supervising teacher.

Additional information for students: previous knowledge etc.

• Design and implementation of the thesis.

Assessment criteria

• The evaluation of the completed thesis is based on the evaluation table in the Lab thesis guidelines.

Assessment scale

1-5

Failed (0)

• The evaluation of the completed thesis is based on the evaluation table in the Lab thesis guidelines.

Assessment criteria: level 1 (assessment scale 1–5)

• The evaluation of the completed thesis is based on the evaluation table in the Lab thesis guidelines.

Assessment criteria: level 3 (assessment scale 1–5)

• The evaluation of the completed thesis is based on the evaluation table in the Lab thesis guidelines.

Assessment criteria: level 5 (assessment scale 1–5)

• The evaluation of the completed thesis is based on the evaluation table in the Lab thesis guidelines.

Learning outcomes

The student is able to:
- present the results or output of their thesis
- report on their thesis in writing in accordance with the thesis guidelines of LAB University of Applied Sciences
- write a maturity test.

Implementation and methods of teaching

• Finishing the job. Summary and evaluation seminars. Participation in an exhibition.

Learning material and recommended literature

• Lab thesis manual.

Alternative completion methods

• In exceptional cases, this will be agreed with the supervising teachers.

Working life cooperation

• Individual theses may be carried out in cooperation with working life partners. The construction of an exhibition may also involve cooperation with the working world.

Learning environment

• Campus, showrooms.

Student time use and work load

• The thesis design component is 5 credits, equivalent to approximately 135 hours of student work (one credit 27 hours).

Contents

• At this stage of the course, the thesis has progressed to the finalisation and publication stage.
In the synthesis seminar, permission will be given to participate in the public evaluation.

The written part will be finalised, used in Turnitin and submitted to the assessors. The artwork will be finalised for the exhibition and, in the case of a dummy for a photo book, for example, will be submitted to the evaluators. The judges will have access to the exhibition work in advance in the form of a pdf of the photo booklet that will be sent to them.

Each student will be involved in the construction of the exhibition, its publicity, etc.

One or more external assessors will be invited to the assessment session. The teachers who supervised the work in the seminars will also take part in the evaluation. The communication teachers will give a written opinion on the written part of the work.'

The student uploads the completed, assessed and approved work to Theseus.
Students will take the maturity test as informed by the supervising teacher.

Additional information for students: previous knowledge etc.

• Design and implementation of the thesis.

Assessment criteria

• The evaluation of the completed thesis is based on the evaluation table in the Lab thesis guidelines.

Assessment scale

1-5

Failed (0)

• The evaluation of the completed thesis is based on the evaluation table in the Lab thesis guidelines.

Assessment criteria: level 1 (assessment scale 1–5)

• The evaluation of the completed thesis is based on the evaluation table in the Lab thesis guidelines.

Assessment criteria: level 3 (assessment scale 1–5)

• The evaluation of the completed thesis is based on the evaluation table in the Lab thesis guidelines.

Assessment criteria: level 5 (assessment scale 1–5)

• The evaluation of the completed thesis is based on the evaluation table in the Lab thesis guidelines.