Workshop licenseLaajuus (5 cr)
Code: AM00BW57
Credits
5 op
Objective
The student is able to
- use the workshops in a safe manner, follow rules and instructions and justify her/his actions with given instructions
- with guidance use the most common tools and devices as well as techniques in the workshop
- manufacture the given assignments under supervision.
Enrollment
15.01.2024 - 29.02.2024
Timing
15.01.2024 - 31.05.2024
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Unit
Institute of Design and Fine Arts (LAB)
Campus
Lahti Campus
Teaching languages
- Finnish
Degree programmes
- Bachelor’s Degree Programme in Industrial Design (in Finnish), (2020, 2021, 2022, 2023)
Teachers
- Kimmo Kukkonen
Teacher in charge
Anu Akkanen
Scheduling groups
- TEMU20 (Size: 0. Open UAS: 0.)
Groups
-
MLTITEMU20S
Small groups
- Luennot 1
Learning outcomes
The student is able to
- use the workshops in a safe manner, follow rules and instructions and justify her/his actions with given instructions
- with guidance use the most common tools and devices as well as techniques in the workshop
- manufacture the given assignments under supervision.
Assessment scale
1-5
Enrollment
15.05.2023 - 01.09.2023
Timing
05.09.2023 - 11.10.2023
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Unit
Institute of Design and Fine Arts (LAB)
Campus
Lahti Campus
Teaching languages
- Finnish
Seats
10 - 20
Degree programmes
- Bachelor’s Degree Programme in Interior Architecture and Furniture Design (in Finnish)
Teachers
- Mika Huovinen
- Kimmo Kukkonen
Scheduling groups
- Harjoitukset 1 (Size: 0. Open UAS: 0.)
Groups
-
MLTISIK23S
Small groups
- Harjoitukset 1
Learning outcomes
The student is able to
- use the workshops in a safe manner, follow rules and instructions and justify her/his actions with given instructions
- with guidance use the most common tools and devices as well as techniques in the workshop
- manufacture the given assignments under supervision.
Assessment scale
Approved/Failed
Enrollment
15.05.2023 - 01.09.2023
Timing
01.08.2023 - 30.12.2023
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Unit
Institute of Design and Fine Arts (LAB)
Campus
Lahti Campus
Teaching languages
- Finnish
Seats
10 - 20
Degree programmes
- Bachelor’s Degree Programme in Industrial Design (in Finnish), (2020, 2021, 2022, 2023)
Teachers
- Kimmo Kukkonen
- Henri Halla-Aho
Scheduling groups
- Opetus (Size: 0. Open UAS: 0.)
Groups
-
MLTITEMU23S
Small groups
- Toteutuksen opetusryhmä 1
Learning outcomes
The student is able to
- use the workshops in a safe manner, follow rules and instructions and justify her/his actions with given instructions
- with guidance use the most common tools and devices as well as techniques in the workshop
- manufacture the given assignments under supervision.
Implementation and methods of teaching
The course is primarily intended for TEMU23S students.
The course is implemented as guided workshop work, during which predefined practice tasks are implemented. During the course, the most commonly used machines and equipment of the Wood and Metal Workshop are presented with the help of examples, as well as their safe way of working, and the use of the machines is practiced
Timing and attendance
On the first day, the group is divided into half a wood and metal workshop. After the next six days, the groups change workshops.
Wood and metal workshop mandatory for the first three times. Otherwise attendance obligation 80%
The lesson starts at 9:15 a.m. and ends at 4:00 p.m
Assessment scale
Approved/Failed
Assessment criteria: assessment scale failed/approved
The student knows how to use the most common machines and equipment in a wood and metal workshop safely
Knows how to take care of the workshop environment and a safe way of working.
Able to prepare exercise tasks under guidance.
Enrollment
15.05.2023 - 01.09.2023
Timing
01.08.2023 - 31.12.2023
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Unit
Institute of Design and Fine Arts (LAB)
Campus
Lahti Campus
Teaching languages
- Finnish
Seats
0 - 23
Degree programmes
- Bachelor’s Degree Programme in Wearable Design (in Finnish)
Teachers
- - LAB_virtuaaliopettaja_PUMU_01
Scheduling groups
- Toteutuksen opetusryhmä 1 (Size: 0. Open UAS: 0.)
Groups
-
MLTIPUMU23S
Small groups
- Toteutuksen opetusryhmä 1
Learning outcomes
The student is able to
- use the workshops in a safe manner, follow rules and instructions and justify her/his actions with given instructions
- with guidance use the most common tools and devices as well as techniques in the workshop
- manufacture the given assignments under supervision.
Implementation and methods of teaching
Face-to-face teaching at campus.
Experiments.
Timing and attendance
Building the know-how requires active presense.
Learning material and recommended literature
Recommended by the teacher.
Student time use and work load
5 ct is equal to app. 135h work.
Contents
The course is divided into two integrated parts:
1. Sewing. Teacher: Jarkko Karppinen
- introduction to the machinery and equipment
- basic seam structures
- sewing experiments
- execution of the workshop license
2. Pattern cutting basics. Teacher: Yat Cheung (in english)
- introduction to the basic block
- modelling the basic block
- pattern cutting tasks
Additional information for students: previous knowledge etc.
If you have know-how in pattern cutting and sewing with industrial machines, contact the teacher.
Assessment criteria
Attendance and activity.
Execution of the required tasks according to the schedule.
Assessment by the teachers.
Assessment scale
Approved/Failed
Assessment criteria: assessment scale failed/approved
Approved:
Attendance and activity. Minimum of 80% attendance.
Execution of the required tasks according to the schedule.
Fail:
More than 80% non-attendance.
Tasks not completed and handed-in according to the schedule.
Enrollment
21.11.2022 - 15.01.2023
Timing
01.01.2023 - 31.05.2023
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Unit
Institute of Design and Fine Arts (LAB)
Campus
Lahti Campus
Teaching languages
- Finnish
Seats
0 - 20
Degree programmes
- Bachelor’s Degree Programme in Interior Architecture and Furniture Design (in Finnish)
Teachers
- Kimmo Kukkonen
- Mika Huovinen
- Timo Roininen
- Olli Hyyrynen
Scheduling groups
- Harjoitukset 1 (Size: 0. Open UAS: 0.)
Groups
-
MLTISIK23K
Small groups
- Harjoitukset 1
Learning outcomes
The student is able to
- use the workshops in a safe manner, follow rules and instructions and justify her/his actions with given instructions
- with guidance use the most common tools and devices as well as techniques in the workshop
- manufacture the given assignments under supervision.
Assessment scale
Approved/Failed
Enrollment
01.07.2022 - 04.09.2022
Timing
31.08.2022 - 16.12.2022
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Unit
Institute of Design and Fine Arts (LAB)
Campus
Lahti Campus
Teaching languages
- English
Degree programmes
- Bachelor’s Degree Programme in Wearable Design (in Finnish)
Teachers
- Yat Cheung
Teacher in charge
Tero Leponiemi
Scheduling groups
- Harjoitukset 1 (Size: 0. Open UAS: 0.)
Groups
-
MLTIPUMU22S
Small groups
- Harjoitukset 1
Learning outcomes
The student is able to
- use the workshops in a safe manner, follow rules and instructions and justify her/his actions with given instructions
- with guidance use the most common tools and devices as well as techniques in the workshop
- manufacture the given assignments under supervision.
Assessment scale
1-5
Enrollment
01.07.2022 - 04.09.2022
Timing
24.08.2022 - 30.10.2022
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Unit
Institute of Design and Fine Arts (LAB)
Campus
Lahti Campus
Teaching languages
- Finnish
Degree programmes
- Bachelor’s Degree Programme in Industrial Design (in Finnish), (2020, 2021, 2022, 2023)
Teachers
- Timo Roininen
- Olli Hyyrynen
Teacher in charge
Tero Leponiemi
Scheduling groups
- Toteutuksen opetusryhmä 1 (Size: 0. Open UAS: 0.)
Groups
-
MLTITEMU22S
Small groups
- Toteutuksen opetusryhmä 1
Learning outcomes
The student is able to
- use the workshops in a safe manner, follow rules and instructions and justify her/his actions with given instructions
- with guidance use the most common tools and devices as well as techniques in the workshop
- manufacture the given assignments under supervision.
Assessment scale
Approved/Failed
Enrollment
01.07.2022 - 04.09.2022
Timing
01.08.2022 - 30.10.2022
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Unit
Institute of Design and Fine Arts (LAB)
Campus
Lahti Campus
Teaching languages
- Finnish
Seats
0 - 20
Degree programmes
- Bachelor’s Degree Programme in Interior Architecture and Furniture Design (in Finnish)
Teachers
- Kimmo Kukkonen
- Timo Roininen
- Olli Hyyrynen
Scheduling groups
- Pajatyöskentely (Size: 0. Open UAS: 0.)
Groups
-
MLTISIK22S
Small groups
- Harjoitukset 1
Learning outcomes
The student is able to
- use the workshops in a safe manner, follow rules and instructions and justify her/his actions with given instructions
- with guidance use the most common tools and devices as well as techniques in the workshop
- manufacture the given assignments under supervision.
Assessment scale
Approved/Failed
Enrollment
19.11.2021 - 09.01.2022
Timing
10.01.2022 - 01.04.2022
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Unit
Institute of Design and Fine Arts (LAB)
Campus
Lahti Campus
Teaching languages
- Finnish
Seats
10 - 20
Degree programmes
- Bachelor’s Degree Programme in Interior Architecture and Furniture Design (in Finnish)
Teachers
- Kimmo Kukkonen
- Pekka Koponen
- Timo Roininen
- Olli Hyyrynen
Teacher in charge
Jorma Lehtonen
Scheduling groups
- Luennot (Size: 0. Open UAS: 0.)
Groups
-
MLTISIK22K
Small groups
- Luennot 1
Learning outcomes
The student is able to
- use the workshops in a safe manner, follow rules and instructions and justify her/his actions with given instructions
- with guidance use the most common tools and devices as well as techniques in the workshop
- manufacture the given assignments under supervision.
Assessment scale
Approved/Failed